Kraun KR.MZ Manuale utente
www.kraun.it
USB ADSL Modem V.2
User’s Manual
Manuale Utente
Cod. KR.MZ
www.kraun.it2
Quick Guide
Contents
1. Introduction 6
1.1 System Requirements 6
1.2 Package Contents 6
2. Product Features 7
2.1 Features and Benefits 7
2.2 Applications 7
2.3 ADSL Compliant 8
2.4 ATM and PPP Protocols 8
2.5 Encapsulation Mode 8
2.6 Supported OS 9
2.7 Interface 9
3. Hardware Indicators and Connectors 9
3.1 LED Descriptions 9
3.2 Front Panel 10
3.3 Rear Panel 10
3.4 Connect the Related Devices 10
4. Hardware Installation 11
4.1 Before You Start 11
4.2 Hardware Installation 11
5. Software Installation 12
5.1 Before You Start 12
www.kraun.it 3
Quick Guide
5.2 Windows Installation 13
5.3 Linux Installation 25
5.3.1 Directory Structure 26
5.3.2 Compiling the Driver 26
5.3.3 Loading Modem Driver 27
5.3.4 Verification of driver loading successfully 29
6. Customizing Communication Settings 30
6.1 Accessing Communication Settings on Windows 30
7. The DSL Status Application 33
7.1 Windows DSL Status Application 33
8. Software Uninstall 35
8.1 Windows Uninstall 35
9. Modifying TCP/IP Networking Option 38
9.1 WAN USB Driver 38
9.1.1 Microsoft Windows XP 38
9.1.2 Microsoft Windows 2000 42
9.1.3 Microsoft Windows ME 48
9.1.4 Microsoft Windows 98SE 52
9.2 LAN USB Driver 56
9.2.1 Microsoft Windows XP 56
9.2.2 Microsoft Windows 2000 59
9.2.3 Microsoft Windows ME 61
9.2.4 Microsoft Windows 98SE 65
www.kraun.it4
Quick Guide
1. Introduction
This USB ADSL Modem is an external ADSL modem that con-
necting broadband ADSL line to USB connector of PC system.
The USB ADSL Modem uses advanced ADSL chipset solution
with complete set of industry standard features for high-speed
Internet access. The USB ADSL Modem offers easy installation
and cost-effective connection for SOHO and residential users.
USB bus powered modem without external power is conven-
ient for using. This product complies with FCC part15 regula-
tions and CE approval.
1.1 System Requirements
• Pentium II 233MHz processor or above
• At lease 32MB RAM (64MB recommended)
• 20MB available hard disk or more
• Windows 98SE/2000/ME/XP
• Available USB port
• CD-ROM drive
• ADSL service enabled on your telephone line
• Windows 98SE installation CD, which will be prompted for
during installation.
1.2 Package Contents
• ADSL Modem
www.kraun.it 5
Quick Guide
• RJ-11 phone cable
• USB cable
• Software driver CD
• EZ setup guide
If any of above items is missing or damaged, please contact
your local dealer immediately.
2. Product Features
2.1 Features and Benefits
• USB specifications v1.1 compliant.
• USB bus power. Additional power adapter is unnecessary.
• Full rate operation with up to 8 Mbps downstream data rate
and up to 1 Mbps upstream data rate enables high-speed
Internet access.
• Friendly GUI configuration and management software.
• Firmware downloadable feature provides performance and
feature enhancements in the future release.
• Enables end-to-end ATM support, which allows traffic man-
agement and QoS.
2.2 Applications
• High-speed Internet access
• Video-On-Demand
• Telecommuting
www.kraun.it6
Quick Guide
• E-Commerce
• On-line gaming
• Video conferencing.
2.3 ADSL Compliant
• ANSI T1.413 issue 2
• ITU-T G.992.1 (G.dmt)
• ITU-T G.992.2 (G.lite)
• G.994.1 (G.hs, Multimode).
2.4 ATM and PPP Protocols
• RFC 2516 (PPP over Ethernet)
• RFC 2364 (PPP over ATM)
• RFC 1577 (Classical IP over ATM)
• Multi Protocol over AAL5 (RFC1483 / 2684)
• VC and LLC multiplexing.
2.5 Encapsulation Mode
For WAN Connection
• PPP over ATM LLC (RFC 2364)
• PPP over ATM NULL (RFC 2364)
• PPP over Ethernet (RFC 2516)
www.kraun.it 7
Quick Guide
For LAN Connection
• Classical IP over ATM (RFC 1577)
• IP over ATM Bridged LLC (RFC 2684)
• IP over ATM Bridged VC (RFC 2684)
• IP over ATM Routed LLC (RFC 2684)
• IP over ATM Routed VC (RFC 2684)
VPI / VCI Settings
• VPI value: 0~255
• VCI value: 32~65535.
2.6 Supported OS
• Windows 98SE, ME, 2000, XP
• Mac / Linux (optional).
2.7 Interface
• One USB port compliant with USB v1.1, full speed (12Mbps)
• One RJ11 port for ADSL connection.
3. Hardware Indicators and Connectors
3.1 LED Descriptions
• When modem is establishing the connection, the LED will be
blinking.
• When modem is connected, the LED will be on steadily.
www.kraun.it8
Quick Guide
3.2 LED Descriptions
Connect this connector with Type-B end of USB cable.
3.3 Rear Panel
Connect this connector with RJ-11 cable.
3.4 Connect the Related Devices
1)Connect the provided RJ-11 cable into LINE port on the real
panel of the modem and insert the other end to splitter.
2)Connect the Type-A end of USB cable to your PC.
The diagram below illustrates a connection example.
www.kraun.it 9
Quick Guide
4. Hardware Installation
4.1 Before You Start
In MAC operating systems, you need to install the device driv-
ers first (see next chapter) and then perform the hardware in-
stallation steps below.
4.2 Hardware Installation
Install the USB ADSL Modem by following these steps with the
PC running:
1. Insert the rectangular end of a USB cable into the USB port
of your PC.
2. Insert the square end of the USB cable into the USB port pf
the USB ADSL Modem.
In Windows operating systems, the USB ADSL Modem will be
detected and the
“Found New Hard-
ware Wizard” will
be displayed on the
PC’s screen. Pro-
ceed with the soft-
ware installation
in the next section,
using the operating
system appropriate
to you.
www.kraun.it10
Quick Guide
5. Software Installation
The software installation procedures vary depending upon the
operating system of your PC. Be sure to follow the instructions
provided for the operating system appropriate for you.
5.1 Before You Start
The following information may be required for software instal-
lation. Contact your DSL service provider before proceeding
with software installation.
• IP Address Settings – the software installation process al-
lows the server to dynamically assign IP Address settings.
If your application requires static setting of specific address
information you will need to know:
IP Address
Subnet Mask (for Bridged Ethernet applications only)
Default Gateway (for Bridged Ethernet applications only)
• Name Server Information – the software installation proc-
ess allows the server to dynamically assign Name Server
Address settings. If your application requires static setting
of specific address information you will need to know:
Primary DNS Address
Secondary DNS Address
Primary WINS Address
Secondary WINS Address
• Type of Driver to be installed – WAN and LAN software driv-
ers are supported.
Indice
