Kruger Vigo KCG30 Guida

VIGO
Gas Cooktops
User & Installation Manual
KCG30 & KCG36

2
These instructions have been drawn up for your safety and that of others.
You are therefore requested to read them carefully before installing and
using the appliance. Keep this instruction manual for future reference as
necessary. If the appliance is sold or moved, make sure that the manual is
transferred over to the new user.
❏Installation of the appliance and its connection to the electrical
mains must only be carried out by QUALIFIED PERSONNEL.
Before any procedure, it is important to check that the appliance is
DISCONNECTED from the electrical mains.
❏It is risky to modify or attempt to modify the characteristics of this
product.
❏After removing the appliance from the packaging, make sure that
it is undamaged, and that the electrical lead is in perfect condition.
Otherwise contact your dealer before putting the appliance into
operation.
❏The Manufacturer declines all responsibility in case of failure to comply
with the accident prevention regulations.
❏Make sure that air is able to circulate freely around the appliance. Poor
ventilation may result in a shortage of oxygen.
❏Make sure that the appliance is supplied with the type of gas indicated
on the relative sticker next to the main gas connection pipe.
❏Use of a gas cooking appliance produces heat and moisture in the
room in which it is installed. Ensure that the room is well ventilated by
keeping the air intakes open and in good working order or by installing
an extractor hood with discharge pipe.
❏If the appliance is used intensively for a long time the effectiveness
of the ventilation will have to be increased, for example by opening a
window or increasing the power of any electric extractor fan.
IMPORTANT SAFETY INFORMATION
i.1 Installation

3
❏This product is designed to cook food inside ordinary homes and
for non-professional purposes. It should not be used for any other
purpose.
❏After using the appliance, make sure that all controls are in the “OFF”
position.
❏If you use an electrical socket in close proximity to this appliance, take
care that the cables of the appliances you are using are far away from
any parts of this appliance that may heat up.
❏This appliance must only be used by adults. Make sure that children
do not touch the controls or play with the appliance.
❏The exposed parts of this appliance heat up during cooking and
remain hot for some time even after it is switched off. Keep children
well away until the appliance has cooled down.
❏Keep the appliance thoroughly cleaned after every use. Food residues
such as scraps, oils, fats, may become a re hazard.
❏In the unlikely instance of a malfunction. Never attempt to repair the
appliance yourself. Repairs by unskilled persons may further damage
the unit, and can greatly jeopardize the safety of yourself and your
family. To diagnose the malfunction, please refer to the contents of this
manual. If you do not nd the necessary information, please contact
your nearest service centre. Servicing work on this appliance must
be carried out by a KRÜGER™ authorized technical service centre.
Always request the use of original spare parts.
i.2 During Use
i.3 Child Safety
i.4 Cleaning & Maintenance
i.5 Servicing & Parts

4
❏All the materials used to build this appliance are environmentally
compatible and recyclable. Please make your contribution to
conserving the environment by using the various waste collection
channels available.
❏Appliances which are no longer used or usable are not worthless
waste. Through environmentally friendly disposal, a number of
materials used in the production of your appliance can be recovered.
❏Find out about the current disposal options from your dealer, or your
local authority.
❏Before scrapping the appliance, cut the power supply lead and render
it unusable for safe handling.
i.6 Environmental Protection

5
The following symbols will help you when reading this instruction manual:
TABLE OF CONTENTS
Guide To Using This Manual
IMPORTANT SAFETY INFORMATION..........................................2
TABLE OF CONTENTS................................................................5
PRODUCT DETAILS....................................................................6
CLEANING & MAINTENANCE.....................................................9
TECHNICAL DATA....................................................................11
INSTALLATION...........................................................11
INSTALLATION OPTIONS.........................................................16
CUTOUT SIZES.........................................................................16
WARRANTY..........................................................................17
NOTES...................................................................................19
Suggestion & Advice
Safety Information
!

6
1. Cooktop
2. Small Auxiliary Burner
3. Medium Semi-Rapid Burner
4. Large Rapid Burner
5. Triple Flame Burner
6. Burner Controls
PRODUCT DETAILS
1
52
4
3
6
The symbols on the control knobs means...
All operating positions must be set between the maximum and minimum
ow settings. Never between the maximum setting and the off position.
Burner Controls
Maximum Gas Flow
Off / No Gas Flow
Minimum Gas Flow
Ignition
!

7
1. Fully push down the knob of the burner you would like to use.
2. Turn it counterclockwise past the ignition symbol.
3. Keep the knob pressed for up to ten seconds to heat up the
thermocouple to operational temperature.
4. Check that the ame is even around the burner.
5. Release the knob and adjust for your desired ame level.
6. To turn off the ame, turn the knob clockwise to the OFF position.
A. Burner Cap
B. Ignition Plug
C. Thermocouple
D. Triple Flame Cap
To obtain a ame easier, light the burner before placing any cookware on
the stands.
In case of a power outage, place a small ame (ie: matches, lighter) next
to the burner you would like to light. And follow the same instructions as
above. Please exercise extreme caution when handling an open ame
near the cooktop.
Before removing cookware from the burners, always lower or turn off the
ame to prevent re hazard, such as the sudden ignition of oil fumes in
the uplifting current created from lifting a hot pan.
Lighting The Burners
Burner External Parts
!

8
For lower gas consumption and better efciency: Use only at-bottomed pans
of dimensions suitable for the burners. Also, as soon as a liquid comes to a
boil take care to turn the ame down to a level that will keep it boiling, but not
over-boiling.
Burner Min. Diameter Max Diameter
Large (Rapid) 180mm / 7” 220mm / 9”
Medium (Semi-Rapid) 120mm / 5” 200mm / 8”
Small (Auxiliary) 80mm / 3” 160mm / 6”
Triple Flame 220mm / 9” 260mm / 10”
Cookware Usage
When boiling water, place the lid over your cookware to bring it to a boil
faster. The pressure created from the lid will keep the temperature up,
and in turn save the amount of natural gas required to boil water.
Pay extra attention when cooking foods involving fats or oils. These
substances can easily catch re if brought to high temperatures.
!

9
Wash enameled parts with lukewarm water and detergent. Do not use
abrasive products which might damage them.
Wash the ame caps and burner caps often with boiling water and detergent,
taking care to remove all deposits. The hob pan stands can also be washed in
a dishwasher.
For stubborn grime, use ordinary non-abrasive detergents or specic
commercial products. We strongly advise you not to use scouring pads, steel
wool or acids for cleaning.
Automatic burner ignition is provided by a ceramic “ignition plug” and a metal
electrode (B in g.1 page 7). Clean these parts thoroughly periodically. To avoid
ignition difculties, check that the cavities in the burner are not obstructed.
To remove deposits from the burner cavities, remove the cap and separate the
two parts (g. 1 page 7). After cleaning, put the parts back together and return
them correctly to their position. After washing, replace the hob pan stands,
checking that they are correctly positioned before placing a cookware on top.
Have the condition and efciency of the gas pipe and the pressure regulator
checked periodically. If anomalies are found, do not attempt to repair, but have
the faulty part replaced completely.
To ensure good performance and safety, the gas regulator taps must be
greased periodically.
General Cleaning
Cleaning Ignition Plugs
Routine Maintenance
Periodic lubrication of the taps must only be carried out by qualied
personnel, who must also be contacted if the appliance malfunctions.
Before cleaning or servicing your cooktop, disconnect it from the
electrical mains and allow it to cool down.
!
!
CLEANING & MAINTENANCE

10
Before leaving the factory, this appliance was tested and adjusted by qualied
professional technicians to give the best operating results. Any subsequent
necessary repairs or adjustments must be carried out with the greatest care
and attention.
For this reason, we strongly advise you always to contact the dealer who
sold you the appliance or our nearest service centre, specifying the nature of
the problem, the model of the equipment (Mod.), The product number (Prod.
No.) And the serial number (Ser. No.). These can be found on a sticker placed
underneath the cooktop. Always request the use of original spare parts.
You new appliance is covered by a warranty. The warranty conditions are
provided in full at the back of this manual.
Keep the receipt or delivery note, either of which documents your purchase of
the appliance and provides proof of date of purchase, in a safe place together
with this manual.
In the event that a technician is required to visit your home, show these
documents to the technician prior to the inspection and subsequent repairs.
If this procedure is not followed, KRÜGER™ will have no option but to charge
for any repairs.
Service & Parts
Warranty Conditions
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Kruger Piano cottura


















