KSB RPHb Manuale utente

Oil Mist Lubrication

RPHb

Supplementary Operating

Manual

Legal information/Copyright

Supplementary Operating Manual Oil Mist Lubrication

Original operating manual

KSB Aktiengesellschaft

or processed for any other purpose, nor otherwise transmitted, published or made available to a third

party without KSB´s express written consent.

Subject to technical modification without prior notice.

Contents

1 Supplementary Operating Manual .................................................... 4

1.1 General ............................................................................................................ 4

1.2 Uncooled pump ............................................................................................... 4

1.3 Cooled pump ................................................................................................... 4

1.4 General assembly drawing ............................................................................. 5

Contents

Oil Mist Lubrication 3 of 6

1 Supplementary Operating Manual

1.1 General

This supplementary operating manual accompanies the operating/installation

manual. All information contained in the operating/installation manual must be

observed.

Table 1: Relevant operating manuals

Type series Reference numbers of the operating/installation

manuals

RPHb 1316.8012, 1316.8013

1.2 Uncooled pump

1.2.1 Fitting the oil mist lubrication system

1. Unscrew plugs 916.N3 and 916.N4 from the bearing brackets.

2. Screw in the pipe unions NPT 1/4" (for oil mist inlet) and NPT 1/2" (for oil mist

outlet) and connect the oil mist pipework.

3. Apply oil mist quantities as stipulated by the manufacturers of the oil mist

lubrication units used.

1.2.2 Removing the oil mist lubrication system (conversion to oil-lubricated bearings)

1. Remove screw plugs 916.N2 and flat steel elements 99-6.N1.

2. Unscrew and remove the oil mist inlet and outlet lines from the respective

connections and close the connections with plugs 916.N3/.N4.

3. Open bearing covers 361.01/360.02 and place oil rings 644.01/.02 into the bearing

brackets.

4. Fit bearing covers 361.01/360.02 again.

5. Fit vent plugs 916.N1, constant-level oilers 638.01/.03 and protective cages

169-10.01/.03 on the bearing brackets.

1.3 Cooled pump

1.3.1 Fitting the oil mist lubrication system

1. Unscrew plugs 916.N3 and 916.N4 from the bearing brackets.

2. Screw in pipe unions NPT 1/4" (for oil mist inlet) and NPT 1/2" (for oil mist outlet)

and connect the oil mist pipework.

3. Run suitable flexible tubing from the oil sump overflows at the constant-level

oilers into the oil return lines.

1.3.2 Removing the oil mist lubrication system (conversion to oil-lubricated bearings)

1. Unscrew and remove the oil mist inlet and outlet lines from the respective

connections at the bearing brackets and close the connections with plugs

NPT 1/4”/NPT 1/2” (916.N3/913.03).

2. Remove the flexible tubing from the oil sump overflows of the constant-level

oilers.

3. Fit protective cages 169-10.01/.03 on the bearing brackets.

1 Supplementary Operating Manual

4 of 6 Oil Mist Lubrication

1.4 General assembly drawing

Fig. 1: Oil mist lubrication

Table 2: List of components

Part No. Description

69-10.03 Protective housing

99-6.N1 Semi-finished product (flat steel)

361.01/.02 Bearing end cover

411.70 Joint ring

642.03 Oil level sight glass

916.N1/.N2/.N3 Plug

1 Supplementary Operating Manual

Oil Mist Lubrication 5 of 6

KSB Aktiengesellschaft

67225 Frankenthal • Johann-Klein-Str. 9 • 67227 Frankenthal (Germany)

Tel. +49 6233 86-0 • Fax +49 6233 86-3401

www.ksb.com

1316.812/04-EN

Indice

Altri manuali KSB Pompa dell'acqua

KSB

KSB Amarex Istruzioni per l'installazione

KSB

KSB Amarex KRT Istruzioni per l'installazione

KSB

KSB Rio-Therm N Series Istruzioni per l'installazione

KSB

KSB Calio S Istruzioni per l'installazione

KSB

KSB KWP-Bloc Istruzioni per l'installazione

KSB

KSB GIW LCC Series Manuale utente

KSB

KSB RC Series Manuale utente

KSB

KSB Magnochem Series Manuale utente

KSB

KSB Amarex KRT Istruzioni per l'installazione

KSB

KSB Etaline-R Istruzioni per l'installazione

KSB

KSB CPK Manuale utente

KSB

KSB Omega Series Manuale utente

KSB

KSB Multitec A SX Istruzioni per l'installazione

KSB

KSB Amarex KRT Istruzioni per l'installazione

KSB

KSB Emporia MB Istruzioni per l'installazione

KSB

KSB RPH Series Manuale utente

KSB

KSB UPA Istruzioni per l'installazione

KSB

KSB Amacan P 700-470 Istruzioni per l'installazione

KSB

KSB Amarex KRT Istruzioni per l'installazione

KSB

KSB Hya-Solo D Series Manuale utente

KSB

KSB Vitacast Istruzioni per l'installazione

KSB

KSB Multi Eco Istruzioni per l'installazione

KSB

KSB Sewatec Istruzioni per l'installazione

KSB

KSB Ixo RW Manuale utente

Manuali Pompa dell'acqua popolari di altre marche

Neptun

Neptun NPHW 5500 Manuale utente

Sensidyne

Sensidyne Gilian BDX-II Istruzioni per l'installazione e il funzionamento

Draper

Draper 47808 Manuale utente

Trolla

Trolla 12820 Manuale utente

Sunfab

Sunfab SVH Series Manuale utente

WilTec

WilTec 50740 Manuale utente

Fieldmann

Fieldmann FVC 5015 EK Manuale utente

Everbilt

Everbilt EFSUB5-122HD Manuale utente

Graco

Graco Husky 3300e Manuale utente

esotec

esotec 101018 Manuale utente

moyno

moyno 2000 CC Manuale utente

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuale utente

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guida alla risoluzione dei problemi

DUROMAX

DUROMAX XP WX Series Manuale utente

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuale utente

Franklin Electric

Franklin Electric IPS Manuale utente

Xylem

Xylem e-1532 Series Manuale utente

Milton Roy

Milton Roy PRIMEROYAL Manuale utente