KT-Elektronik SOL3-5 Manuale utente

Solar and differential temperature controller

SOL3-5

Quick installation and

operating manual

Firmware version 1.07,

April 2011

Quick installation and operating manual KT-Elektronik
Disclaimer of liability
We are  constantly developing  our  products  and therefore,  reserve the  right  to   change  the  product  or  the  information 
contained in this document at any time without notice 
We do not assume any liability for the accuracy or completeness of these mounting and operating instructions  Moreover, we 
do not guarantee that the buyer can use the product for an intended purpose  Excluded are any liability for claims by the  
buyer, especially claims for compensation including lost profits or any other financial loss, except the damage was caused 
intentionally or by gross negligence  If an essential term of the contract is breached by negligence, our liability is limited to  
the foreseeable damage 
Important safety instructions
For your own safety, observe the following instructions on the installation, start up and operation of the controller:
The device may only be installed, started up or operated by trained and experienced 
personnel familiar with the product 
The controller has been designed for use in electrical power systems  For wiring and 
maintenance, you are required to observe the relevant safety regulations 
Content
Installation 3
Mounting 3
Electrical connection 3
Systems 5
Operation and display 8
Operating controls 8
Display 9
Information level 10
Setting the controller time 10
Check and modify times-of-use 11
Check and set party mode 11
Setting the system code number (selection of the hydraulic scheme) 12
Activating und deactivating functions  12
Modify parameters 13
Resetting to default values 13
Important key numbers 13
Manual mode  14
Function block lists 15
CO1: Heating circuit Rk1 15
CO3: Solar circuit 15
CO4: DHW heating  16
CO5: System-wide functions  16
CO6: Modbus 16
Parameter lists 17
PA1: Heating circuit 17
PA3: Solar circuit 17
PA4: Auxilary heating – Storage tank temperature 18
PA5: System-wide parameters 18
PA6: Modbus communikation 18
Technical specification 19
Material 19
2KA_37385_SOL3-5_EN002

KT-Elektronik SOL3-5

The SOL3-5 is a controller for solar thermal systems, and includes at max nine temperature sensor inputs, five switching

outputs, one pulse input and one 0-10V input or output

The controller is ready to use with the temperatures and operating schedules preset by the manufacturer On start-up, the

current time and date need to be set at the controller

This Quick manual contains necessary information for installation and start up

Further informations are available at http://www KT-Elektronik de

Document Content

Mounting and operating instructions detailed decription of the device characteristics

System schemes Schemes of all supported hydraulic systems

Installation

Mounting

Panel mounting Top hat rail mounting Wall mounting

Electrical connection

The wiring diagram is shown on the back side of the housing This diagram is usable for most of the supported systems In

some special configurations, the switching output connections are different The sheet below are showing the terminal-

assignmet for all available system schemes The terminal-assignment for inputs is valid for all systems

Not to required sensors must not be connected

KA_37385_SOL3-5_EN002 3

Quick installation and operating manual KT-Elektronik

System T 21 T 23 T 24 T 26 T 27 T 29 T 30

I - I.0.0 CP1

I - I.0. I CP1 UP M- M+

I - I. I.0 CP1 NH

I - I. I. I CP1 NH UP M- M+

I - I.2.0 CP1 ZP

I - I.2. I CP1 ZP UP M- M+

I - I.3.0 CP1 ZP NH

I - 2.0.0 CP1 SUV

I - 2.0. I CP1 SUV UP M- M+

I - 2. I.0 CP1 SUV NH

I - 2.2.0 CP1 SUV ZP

I – 2.3.0 CP1 SUV ZP NH

I - 3.0.0 SP1 SP2

I - 3.0. I SP1 SP2 UP M- M+

I - 3. I.0 SP1 SP2 NH

I - 3.2.0 SP1 SP2 ZP

I – 3.3.0 SP1 SP2 ZP NH

I o I.0.0 CP1 CTP

I o I.0. I CP1 CTP UP M- M+

I o I. I.0 CP1 CTP NH

I o I.2.0 CP1 CTP ZP

I o I.3.0 CP1 CTP ZP NH

I o 2.0.0 CP1 CTP SUV

I o 2. I.0 CP1 CTP SUV NH

I o 2.2.0 CP1 CTP SUV ZP

I o 2.30 CP1 CTP SUV ZP NH

I o 3.0.0 CP1 SP1 SP2

I o 3. I.0 CP1 SP1 SP2 NH

I o 3.2.0 CP1 SP1 SP2 ZP

I o 3.3.0 CP1 SP1 SP2 ZP NH

2 - I.0.0 CP1 CUV

2 - I.0. I CP1 CUV UP M- M+

2 - I. I.0 CP1 CUV NH

2 - I.2.0 CP1 CUV ZP

2 - I.3.0 CP1 CUV ZP NH

2 - 2.0.0 CP1 CUV SUV

System T 21 T 23 T 24 T 26 T 27 T 29 T 30

2 - 2. I.0 CP1 CUV SUV NH

2 - 2.2.0 CP1 CUV SUV ZP

2 – 2.3.0 CP1 CUV SUV ZP NH

2 - 3.0.0 CUV SP1 SP2

2 - 3. I.0 CUV SP1 SP2 NH

2 - 3.2.0 CUV SP1 SP2 ZP

2 – 3.3.0 CUV SP1 SP2 ZP NH

2 o I.0.0 CP1 CUV CTP

2 o I. I.0 CP1 CUV CTP NH

2 o I.2.0 CP1 CUV CTP ZP

2 o I.3.0 CP1 CUV CTP ZP NH

2 o 2.0.0 CP1 CUV CTP SUV

2 o 2. I.0 CP1 CUV CTP SUV NH

2 o 2.2.0 CP1 CUV CTP SUV ZP

2 o 3.0.0 CP1 CUV SP1 SP2

2 o 3. I.0 CP1 CUV SP1 SP2 NH

2 o 3.2.0 CP1 CUV SP1 SP2 ZP

3 - I.0.0 CP1 CP2

3 - I.0. I CP1 CP2 UP M- M+

3 - I. I.0 CP1 CP2 NH

3 - I.2.0 CP1 CP2 ZP

3 - I.3.0 CP1 CP2 ZP NH

3 - 2.0.0 CP1 CP2 SUV

3 - 2. I.0 CP1 CP2 SUV NH

3 - 2.2.0 CP1 CP2 SUV ZP

3 – 2.3.0 CP1 CP2 SUV ZP NH

3 o I.0.0 CP1 CP2 CTP

3 o I. I.0 CP1 CP2 CTP NH

3 o I.2.0 CP1 CP2 CTP ZP

3 o I.3.0 CP1 CP2 CTP ZP NH

3 o 2.0.0 CP1 CP2 CTP SUV

3 o 2. I.0 CP1 CP2 CTP SUV NH

3 o 2.2.0 CP1 CP2 CTP SUV ZP

3 o 3.0.0 CP1 CP2 SP1 SP2

3 o 3. I.0 CP1 CP2 SP1 SP2 NH

3 o 3.2.0 CP1 CP2 SP1 SP2 ZP

4KA_37385_SOL3-5_EN002

KT-Elektronik SOL3-5

Systems

The SOL3-5 provides 72 different hydraulic systems These differs in basic system components and extentions

Basic system components Extentions

•number of collector arrays,

•number of storage tanks,

•switching between collector arrays and storage tanks using

valves or pumps,

•internal (or non) or external heat exchanger

•heating circuit,

•auxilary heater,

•circulation pump

The system variants are characterised about a multi-digit system identifier for the choice by basic system components and

extentions The order of the system identifier becomes clear with the help of the followed shown hydraulic systems

The schemes below are only schemes, without any kind of basic valves and security equipement A system scheme is

identified by a explicit system schema indicator (e g I o 2. I.0)

System I  I.0.0

1 collector array, 1 storage tank

System 2  I.0.0

2 collector arrays (valve),

1 storage tank

System 3  I.0.0

2 collector arrays (2 pumps),

1 storage tank

Speicher1

Kol lektor-

feld 1

CF1CF1 S F1

CP1

Speicher1

Kol lektor-

feld 1

CF1CF1 SF 1

CP1

Kol lektor-

feld 2

CF2 CUV

Spei cher1

Kol lektor-

feld 1

CF1CF1 S F1

Kol lektor-

feld 2

CP2

CF2

CP1

System I o I.0.0

1 collector array, 1 storage tank,

external heat exchanger

System 2 o I.0.0

2 collector arrays (valve),

1 storage tank, external heat exchanger

System 3 o I.0.0

2 collector arrays (2 pumps),

1 storage tank, external heat exchanger

Speicher1

Kol lektor-

feld 1

CF1CF1 S F1

CP1

CTP

Speicher1

Kol lektor-

feld 1

CF1CF1 SF 1

CP1

CTP

Kol lektor-

feld 2

CF2 CUV

Speicher1

Kol lektor-

feld 1

CF1CF1 S F1

CTP

Kol lektor-

feld 2

CP2

CF2

CP1

System I  2.0.0

1 collector array, 2 storage tanks (valve)

System 2  2.0.0

2 collector arrays (valve),

2 storage tanks (valve)

System 3  2.0.0

2 collector arrays (2 pumps),

2 storage tanks (valve)

Speicher1

Kol lektor-

feld 1

CF1CF1 S F1

CP1

SF2

Speicher2

SUV

Speicher1

Kol lektor-

feld 1

CF1CF1 SF 1

CP1

Kol lektor-

feld 2

CF2 CUV

SF2

Speicher2

S UV

Speicher1

Kol lektor-

feld 1

CF1CF1 S F1

Kol lektor-

feld 2

CP2

CF2

CP1 S F 2

Speicher2

S UV

KA_37385_SOL3-5_EN002 5

Quick installation and operating manual KT-Elektronik

System I o 2.0.0

1 collector array, 2 storage tanks (valve),

external heat exchanger

System 2 o 2.0.0

2 collector arrays (valve),

2 storage tanks (valve),

external heat exchanger

System 3 o 2.0.0

2 collector arrays (2 pumps),

2 storage tanks (valve),

external heat exchanger

Speicher1

Kol lektor-

feld 1

CF1CF1 S F1

CP1

CTP S F2

Speicher2

SUV

Speicher1

Kol lektor-

feld 1

CF1CF1 SF 1

CP1

Kol lektor-

feld 2

CF2 CUV

SF2

Speicher2

CTP

S UV

Speicher1

Kol lektor-

feld 1

CF1CF1 S F1

Kol lektor-

feld 2

CP2

CF2

CP1 S F 2

Speicher2

CTP

S UV

System I o 3.0.0

1 collector array,

2 storage tanks (2 pumps),

external heat exchanger

System 2 o 3.0.0

2 collector arrays (valve),

2 storage tanks (2 pumps),

external heat exchanger

System 3 o 3.0.0

2 collector arrays (2 pumps),

2 storage tanks (2 pumps),

external heat exchanger

Speicher1

Kol lektor-

feld 1

CF1CF1 S F1

CP1

SP2

S P1

SF2

Speicher2

SP2

S P1

Speicher1

Kol lektor-

feld 1

CF1CF1 SF 1

CP1

SP2

S P1

Kol lektor-

feld 2

CF2 CUV

SF2

Speicher2

SP2

S P1

Speicher1

Kol lektor-

feld 1

CF1CF1 S F1

SP2

S P1

Kol lektor-

feld 2

CP2

CF2

CP1 S F 2

Speicher2

SP2

S P1

System I  3.0.0

1 collector array,

2 storage tanks (2 pumps)

System 2  3.0.0

2 collector arrays (valve),

2 storage tanks (2 pumps)

Speicher1

Kol lektor-

feld 1

CF1CF1 S F1

SF2

Speicher2

SP2

S P1

Speicher1

Kol lektor-

feld 1

CF1CF1 SF 1

SF2

Speicher2

Kol lektor-

feld 2

CF2 CUV

SP2

S P1

6KA_37385_SOL3-5_EN002

KT-Elektronik SOL3-5

Every shown schemes above could be extend with some additional functions The extentions (e g heating circuit, auxilary

heating and circutation) can be combined They are coded in the lower digits of the system schema indicator

Xxx.0.0 no extention xxx.0. I heating ciruit

xxx. I.0 auxilary heating xxx. I.0 auxilary heating and heating ciruit

xxx.2.0 circulation pump xxx.2. I circulation pump and heating ciruit

xxx.3.0 auxilary heating and circulation pump xxx.3. I aux heating, circulation and heating ciruit

Example extentions of the basic system scheme I - I

System I - I.0. I

(with heating ciruit)

1 collector array, 1 storage tank

System I - I. I.0

(with auxilary heating)

1 collector array, 1 storage tank

System I - I. I. I

(with aux. heating and heating ciruit)

1 collector array, 1 storage tankr

KA_37385_SOL3-5_EN002 7

Quick installation and operating manual KT-Elektronik

Operation and display

Operating controls

The operating controls and the display are located in the front panel of the controller

Rotary pushbutton

Turn: Display, select parameters and function blocks

Push: Confirm adjusted selection or settings

Rotary switch Operating modes

Control operation active, display of informations about the

operation of the controller (normal position - information level)

Control operation deactivated, frost protection is activated

(controller is still active)

Manual mode: Valves and pumps can be controlled manually

Rotary switch Parameter

Solar threshold on

Solar threshold off

Times-of-use and operating modes for:

heating circuit (1), auxilary heating (2) und circulation (3)

Party mode lets dance :-)

Setup of time, date and year

Configuration and parameter level

8KA_37385_SOL3-5_EN002

KT-Elektronik SOL3-5

Display

The display indicates the time as well as information about the operation of the controller when the rotary switch is at the

normal position (information level) The times-of-use together with temperatures of the various control circuits can be viewed

on the display by turning the rotary pushbutton The times-of-use are represented by black squares below the row of

numbers at the top of the display Icons indicate the operating status of the controller

Public holiday mode

Vacation mode

Malfunction

Frost protection

1Heating circuit 2Solar circuit 3Auxilary heating, circulation

Automatic mode Normal mode Automatic mode

Night mode Manual mode Night mode

Day mode Stand-by mode Day mode

Manual mode Collector pump CP1 Manual mode

Stand-by mode Collector exchanger pump CTP Stand-by mode

Pump UP1 Storage tank pump SP1 Circulation pump ZP

Valve M1 OPEN Collector valve CUV

Collector pump CP2 Auxilary heating NH

Valve M1 CLOSE Storage tank valve SUV

Storage tank pump SP2

Temperature difference switch

TdS

Essential meaning for the symbol(s) of the collector pump(s):

Symbol or Description

Symbol OFF Pump is OFF

Symbol flashes short Valid temperature condition to switch on a pump, but pump leaves for

switch-off-time cycle in off state

Symbol ON, but cyclicOFF flashing Valid temperature condition to switch off a pump, but pump leaves for

switch-on-time cycle in off state

Symbol ON Pump ON

KA_37385_SOL3-5_EN002 9

Quick installation and operating manual KT-Elektronik

Information level

At the normal rotary switch position ,„Information level“, the time, date, public holidays and vacation periods as well as

the temperatures measured by the connected sensors and their set points ca be retrieved and displayed (Press and hold

rotary push butten to display set points)

Depending on the configuration of the controller, the current values of the following data points are displayed one after the

other:

Set rotary switch to information level;

Display: time __:__ Time

Outdoor temperature AF Temperature at storage tank sensor

SF1

Room temperature RF Temperature at storage tank sensor

SF2

Temperature at flow sensor of heating circuit VF Temperature at collector sensor CF1

Temperature at flow sensor CVF

(collector to storage tank) 2

Temperature at collector sensor CF2

Temperature at return flow sensor CRF

(storage tank to collector) Operating hours of solar circiut

Setting the controller time

Set rotary switch to time;

Symbol time and parameter blink,

Display: time

Turn rotary pushbutton;

Edit controller time

Push rotary pushbutton;

Confirm time; Display: year

Turn rotary push button;

Edit year

Push rotary pushbutton;

Confirm year; Display: date

Turn rotary pushbutton;

Edit Date

Push rotary pushbutton;

Edit date; Display: time

10 KA_37385_SOL3-5_EN002

Altri manuali per SOL3-5

Indice

Altri manuali KT-Elektronik Regolatori di temperatura

KT-Elektronik

KT-Elektronik SOL3-5 Manuale utente

KT-Elektronik

KT-Elektronik SOL3-3 Manuale utente

KT-Elektronik

KT-Elektronik SOL3-7 Manuale utente

Manuali Regolatori di temperatura popolari di altre marche

Swegon

Swegon LUNAd MB Manuale utente

Lucky Reptile

Lucky Reptile Thermo Control II Manuale utente

SENSORMETRIX

SENSORMETRIX Argon 100 Manuale utente

Fuji Electric

Fuji Electric PXE4 Manuale utente

Yuyao gongyi

Yuyao gongyi XMT-808 series Manuale utente

Selec

Selec TC544C Manuale utente

P.W. KEY

P.W. KEY rt-208gt Manuale utente

Future Design

Future Design FDC-9200 Manuale utente

BH Thermal

BH Thermal BriskONE Manuale utente

Omron

Omron E5EX-H Manuale utente

West Control Solutions

West Control Solutions KS 45 Guida rapida

MCS

MCS RITC-15B Manuale utente

SMC Networks

SMC Networks Thermo-con INR-244-639 Manuale utente

eltherm

eltherm Ex-TC It Series Manuale utente

Omron

Omron C200H-TV Series Manuale utente

industrie technik

industrie technik CA1 Manuale utente

KRAL

KRAL EET 32 Manuale utente

dixell

dixell XR420C Schema elettrico