KTI KS-616F Manuale utente
-20-
Installation Guide
10/100 Fast Ethernet Switch
KS-616F KS-624F
P/N:750-0140-001
DOC.000617-KS616F-624F-K
-21-
2000 KTI Networks Inc. All rights reserved. No part of this documen-
tation may e reproduced in any form or y any means or used to make
any directive work (such as translation or transformation) without per-
mission from KTI Networks Inc.
KTI Networks Inc. reserves the right to revise this documentation and to
make changes in content from time to time without o ligation on the part
of KTI Networks Inc. to provide notification of such revision or change.
For more information, contact:
United States KTI Networks Inc.
P.O. BOX 631008
Houston, Texas 77263-1008
Phone: 713-2663891
Fax: 713-2663893
E-mail: [email protected]
WWW: http://www.ktinet.com/
International Fax: 886-2-26983873
E-mail: [email protected]
WWW: http://www.ktinet.com.tw/
-23-
The information contained in this document is subject to change without prior notice.
TRADEMARKS
Ethernet is a registered trademark of Xerox Corp.
This device complies with Class A Part 5 the FCC Rules. Operation is subject to the following two
conditions: ( ) This device may not cause harmful interference, and (2) this device must accept any
interference received including the interference that may cause.
CISPRACOMPLIANCE:
This device complies with EMC directive of the European Community and meets or exceeds the follow-
ing technical standard.
EN 55022 - Limits and Methods of Measurement of Radio Interference Characteristics of Information
Technology Equipment. This device complies with CISPR Class A.
WARNING: This is a Class A product. In a domestic environment this product may cause radio inter-
ference in which case the user may be required to take adequate measures.
CE NOTICE
Marking by the symbol indicates compliance of this equipment to the EMC directive of the
European Community. Such marking is indicative that this equipment meets or exceeds the following
technical standards:
EN 55022: Limits and Methods of Measurement of Radio Interference characteristics of Information
Technology Equipment.
EN 50082/ :Generic Immunity Standard -Part : Domestic Commercial and Light Industry.
EN 60555-2: Disturbances in supply systems caused by household appliances and similar electrical equip-
ment - Part 2: Harmonics.
-24-
Table of Contents
1. Introduction ................................................................................. 1
1.1 Features ................................................................................................................. 2
1.2 Specifications ....................................................................................................... 3
2. Installing the Switch ................................................................... 4
2.1 Packing List ......................................................................................................... 4
2.2 Panels .................................................................................................................... 4
2.3 Mounting the Switches ........................................................................................ 6
3. Making Network Connections ....................................................
3.1 etwork Switched Ports ..................................................................................... 7
3.2 Pin Assignments of MDI-X and MDI RJ-45 .................................................... 8
3.3 UTP Cables .......................................................................................................... 9
3.4 UTP Connections.............................................................................................. 1 0
3.5 Fiber Connections .............................................................................................. 1 1
3.6 Operating Mode ................................................................................................. 1 4
3.7 Trunking Support .............................................................................................. 1 5
4. LED Indicators ........................................................................... 18
4.1 LED Panels ........................................................................................................ 1 8
4.2 Interpretation .................................................................................................... 1 9
-1-
1. Introduction
Driven y recent advances in desktop computing technology, todays
network applications have increased in speed, power and the a ility to
process information. To meet the demands of these more powerful appli-
cations, two afforda le switch devices provides significant increase in
performance for your Ethernet or Fast Ethernet network. The switches
come with high num er of switched ports, each capa le of transferring
information simultaneously at full wire speed to control and allocate the
network andwidth.
The key features of the switch units are:
High Port-count and Bandwidth : Com ining large num er of 10/
100M ps- ased Fast Ethernet switched ports, the switches deliver
up to 3.2 G ps or 4.8 G ps aggregated network andwidth for your
Fast Ethernet network
Easy Migration : With 10BASE-T support on each port, the
switches provide a non-disruptive and smooth migration path from
Ethernet to Fast Ethernet network.
Fiber Connectivity : With two optional fi er ports, the switches
support fi er connections to 100BASE-FX devices.
Easy Installation : With the functions of auto-speed-sensing and
auto-negotiation on each port, the switches support plug-and-play
installation which eliminates configuration pro lems.
-2-
1.1 Features
Designed for resolving congestion pro lems caused y andwidth-hun-
gry devices and andwidth-intensive applications as well as a high num-
er of users, the switches not only adhere to the IEEE 802.3 10BASE-T
and IEEE 802.3u 100BASE-TX 100BASE-FX standards, ut also feature:
High port-count of 10/100BASE-TX auto-negotiation switched
ports for flexi le connections to desktop PCs, servers and hu s.
The 10/100BASE-TX switched ports support:
- auto speed sensing for 100M ps or 10M ps connection
- auto configuration with auto-negotiation devices
The optional 100BASE-FX switched ports support:
- full duplex or half duplex for 100M ps connection
- a variety of fi er modules for diversified fi er needs
Self learning for network configuration
Store and forward switching to ensure only good packets are forwarded
Full-duplex or half-duplex operation support for all switched ports
Forwarding and filtering at full wire speed
Support IEEE 802.3x flow control for full-duplex operation
Support ack-pressure flow control for half-duplex operation
Comprehensive LED indicators provide quick, easy to read port
and switch information
Additional uplink jack allows easy connection to different types of
devices with a straight-through ca le instead of a modified
crossover ca le
Trunking support to increase the connection andwidth up to
800M ps etween two switches
-3-
1.2 Specifications
Common Specifications
Standard IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX, 100BASE-FX
Cables 10BASE-T Cat. 3, 4, 5 UTP ca le (100 meters max.)
100BASE-TX Cat. 5 UTP ca le (100 meters max.)
100BASE-FX Multimode fi er, Single mode fi er
Unit LED Power status
TP Port LED Link/Activity, Speed, Duplex/Collision status per port
Filtering rate 14,880 pps for Ethernet (10BASE-T)
148,800 pps for Fast Ethernet (100BASE-TX)
Forwarding rate 14,880 pps for Ethernet (10BASE-T)
148,800 pps for Fast Ethernet (100BASE-TX)
Filtering address Multicast/Broadcast/Unicast address
Aging Time 300 seconds
Environment Temperature 0oC to 40oC
Relative humidity 10% to 90% non-condensing
Power Universal power supply 100-240VAC, 50/60Hz, 25W
-4-
2. Installing the Switch
The switch is designed to operate in workgroup environments without a
complicated configuration procedure. It also features an auto-select 100-
240V, 50/60Hz power supply unit, which works in most countries around
the world.
Before connecting the supplied power cord into the switch, check to see
that the cord voltage and current rating conform to the standards of the
country of operation.
2.1 Packing List
The switch has the following components shipped with it:
One switch unit
One AC power cord
19-inch rack mount kit
Installation guide
2.2 Panels
The following figure illustrates the major components on front and rear
panels:
-5-
The 16-Port Switch Model
The 24-port Switch Model
Configuration DIP SW
-6-
2.3 Mounting the Switches
Desktop Mounting
The switches can e placed on a desktop as a stand-alone unit. Allow
enough ventilation space etween the hu and the o jects around it.
Desktop Mounting
Rack Mounting
For mounting the switch into a 19-inch rack, a pair of mounting rackets
is included in the pack.
Install Rack Mount Brackets
Install the switch into a 19-inch rack as illustrated in the following figure:
Install the Switch into a 19-inch Rack
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali KTI Router di rete
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza