Kustom Signals Eagle 3 Manuale utente

- Press to enter Menus. In Menus, pressing

increments Menu screens.

- Initiates the display, internal and tuning fork

tests. In

Menus, pressing will save selection and

return

to Main Enforcement screen.

- Programmable soft key short cut to favorite

menu.

Toggles Patrol Speed Blanking with a

locked target.

- Control for power on / off.

Power off to save

current menu selections.

Eagle 3 Quick Reference Guide

North Carolina

1Eagle 3 Front Panel Controls

www.kustomsignals.com

Sales (800) 4KUSTOM (800) 458-7866

Customer Service (800) 835-0156

Eagle 3 Quick Reference Guide

KSI Part # 006-1003-11 Rev 1

4Eagle 3 Fork Test

Stationary Tuning Fork Test

1. Place the Eagle 3 in stationary mode, select Front antenna.

2. Press the Test button or touch screen lower right.

3. Lightly strike the low fork (30 mph) and place in front of the

antenna. Verify the speed displayed is ±1 mph.

4. Repeat for the high fork and rear antenna (if used.)

Moving Mode Tuning Fork Tests

1. Place in the Moving Opposite mode, select Front antenna.

2. Press the Test button or touch screen lower right.

3. Lightly strike the low fork (30 mph) and place in front of the

antenna. Verify the Patrol speed displayed is ±1 mph.

4. While holding the lower speed fork in front of the antenna,

lightly strike the high fork (55 mph) and place in front of the

antenna. Verify the Target speed displayed is the difference

between forks (25 mph) with a tolerance of ±1 mph.

5. Repeat for Same direction with the High, then Low forks.

6. Verify the speed is the sum of the forks (85) ±1 mph.

7. Repeat for the rear antenna (if used.)

2Eagle 3 Remote Control

Lock/Rel –

Toggles target Lock/Release. With

unit in HOLD, press and hold for QuikTrak. In

Audio Menu, toggles squelch on/off. In

Display Menu, toggles backlight control.

Move/STA - Toggles between stationary and

moving modes. In Display Menu, toggles C1 &

C3 display color settings.

Tgt Dir –Stationary –Press to select

Stationary All, approaching only, and

receding only. Moving - toggles between

Opposite and Same Direction. In C1 Display

Menu, progresses background colors.

D BACK - In Menus, press to go back 1 menu

E Access to battery compartment

LED –Red - trying to connect.

Green - connected

Front/Hold - Toggles on/off Front antenna. If

rear antenna active, press to place Rear

antenna in Hold and activate Front. In

Menus,

increases level.

Rear/Hold - Toggles on/off Rear antenna. If

front antenna active, press to place Front

antenna in Hold and activate Rear. In Menus,

decreases level.

Enter –In Menus, Enters selection and returns

unit to Main Enforcement screen.

Menu/BKLT - Quick press illuminates remote

backlight. Press and Hold to enter Menus. In

Menus, press to increment Menus.

TGT DIR

In Stationary

operation, progresses All,

approaching only, and receding only target

zones. In Moving Operations, it toggles

Opposite

and Same

Direction. In C1 Display

menu, progresses background colors.

Down Arrow

Down

arrow in menus; lowers brightness in

Display Menu with manual control.

Front

Toggles Front antenna microwave

transmitter on/off

. Toggles C1/C3 color

selection

in Display Menu.

D. Rear

Toggles Rear antenna microwave

transmitter on/off

. Toggles C1/C3 color

selection

in Display Menu.

Up Arrow

Toggles Moving/Stationary Modes, Up

arrow in menu

screens; increases

brightness in Display Menu with manual

control.

Lock

Locks Target

Speed. Toggles

manual/automatic brightness control in

Display Menu.

G. Test

Short cut to Tuning Fork test.

3Eagle 3 Touch Screen Control Pads

NOTE: The first

button press wakes

the remote. It will

take action on the

next button press.

NOTE: NO LED

indicates the

batteries need to be

replaced.

2Eagle 3 Remote Control

Lock/Rel –

Toggles target Lock/Release. With

unit in HOLD, press and hold for QuikTrak. In

Audio Menu, toggles squelch on/off. In

Display Menu, toggles backlight control.

Move/STA - Toggles between stationary and

moving modes. In Display Menu, toggles C1 &

C3 display color settings.

Tgt Dir –Stationary –Press to select

Stationary All, approaching only, and

receding only. Moving - toggles between

Opposite and Same Direction. In C1 Display

Menu, progresses background colors.

D BACK - In Menus, press to go back 1 menu

E Access to battery compartment

LED –Red - trying to connect.

Green - connected

Front/Hold - Toggles on/off Front antenna. If

rear antenna active, press to place Rear

antenna in Hold and activate Front. In

Menus,

increases level.

Rear/Hold - Toggles on/off Rear antenna. If

front antenna active, press to place Front

antenna in Hold and activate Rear. In Menus,

decreases level.

Enter –In Menus, Enters selection and returns

unit to Main Enforcement screen.

Menu/BKLT - Quick press illuminates remote

backlight. Press and Hold to enter Menus. In

Menus, press to increment Menus.

TGT DIR

In Stationary

operation, progresses All,

approaching only, and receding only target

zones. In Moving Operations, it toggles

Opposite

and Same

Direction. In C1 Display

menu, progresses background colors.

Down Arrow

Down

arrow in menus; lowers brightness in

Display Menu with manual control.

Front

Toggles Front antenna microwave

transmitter on/off

. Toggles C1/C3 color

selection

in Display Menu.

D. Rear

Toggles Rear antenna microwave

transmitter on/off

. Toggles C1/C3 color

selection

in Display Menu.

Up Arrow

Toggles Moving/Stationary Modes, Up

arrow in menu

screens; increases

brightness in Display Menu with manual

control.

Lock

Locks Target

Speed. Toggles

manual/automatic brightness control in

Display Menu.

G. Test

Short cut to Tuning Fork test.

3Eagle 3 Touch Screen Control Pads

NOTE: The first

button press wakes

the remote. It will

take action on the

next button press.

NOTE: NO LED

indicates the

batteries need to be

replaced.

- Press to enter Menus. In Menus, pressing

increments Menu screens.

- Initiates the display, internal and tuning fork

tests. In

Menus, pressing will save selection and

return

to Main Enforcement screen.

- Programmable soft key short cut to favorite

menu.

Toggles Patrol Speed Blanking with a

locked target.

- Control for power on / off.

Power off to save

current menu selections.

Eagle 3 Quick Reference Guide

North Carolina

1Eagle 3 Front Panel Controls

www.kustomsignals.com

Sales (800) 4KUSTOM (800) 458-7866

Customer Service (800) 835-0156

Eagle 3 Quick Reference Guide

KSI Part # 006-1003-11 Rev 1

4Eagle 3 Fork Test

Stationary Tuning Fork Test

1. Place the Eagle 3 in stationary mode, select Front antenna.

2. Press the Test button or touch screen lower right.

3. Lightly strike the low fork (30 mph) and place in front of the

antenna. Verify the speed displayed is ±1 mph.

4. Repeat for the high fork and rear antenna (if used.)

Moving Mode Tuning Fork Tests

1. Place in the Moving Opposite mode, select Front antenna.

2. Press the Test button or touch screen lower right.

3. Lightly strike the low fork (30 mph) and place in front of the

antenna. Verify the Patrol speed displayed is ±1 mph.

4. While holding the lower speed fork in front of the antenna,

lightly strike the high fork (55 mph) and place in front of the

antenna. Verify the Target speed displayed is the difference

between forks (25 mph) with a tolerance of ±1 mph.

5. Repeat for Same direction with the High, then Low forks.

6. Verify the speed is the sum of the forks (85) ±1 mph.

7. Repeat for the rear antenna (if used.)

Altri manuali per Eagle 3

Indice

Altri manuali Kustom Signals Radar

Kustom Signals

Kustom Signals DRU III Manuale utente

Kustom Signals

Kustom Signals Ontario Falcon HR Manuale utente

Kustom Signals

Kustom Signals Eagle 3 Manuale utente

Kustom Signals

Kustom Signals Falcon HR Manuale utente

Kustom Signals

Kustom Signals HR-12 Manuale utente

Kustom Signals

Kustom Signals Pro-Lite + Manuale utente

Kustom Signals

Kustom Signals ProLaser 4 Manuale utente

Kustom Signals

Kustom Signals Directional Golden Eagle II Manuale utente

Kustom Signals

Kustom Signals Golden Eagle II Manuale utente

Kustom Signals

Kustom Signals Falcon HR Manuale utente

Kustom Signals

Kustom Signals Raptor RP-1 Manuale utente

Kustom Signals

Kustom Signals PMD 250 Manuale utente

Kustom Signals

Kustom Signals Talon Radar Manuale utente

Kustom Signals

Kustom Signals RD-24 SERIES Manuale di istruzioni

Kustom Signals

Kustom Signals Eagle 3 North Carolina Manuale utente

Kustom Signals

Kustom Signals EAGLE II Manuale utente

Kustom Signals

Kustom Signals ProLaser III Manuale utente

Kustom Signals

Kustom Signals Pro-Lite Manuale utente

Manuali Radar popolari di altre marche

SAW D2L

SAW D2L Valentine One Gen2 Manuale utente

Raymarine

Raymarine Raytheon R20X Manuale utente

Simrad

Simrad CA34 Manuale utente

Endress+Hauser

Endress+Hauser Micropilot FMR67B Specifiche tecniche

Endress+Hauser

Endress+Hauser Levelflex M FMP45 Manuale utente

ECHOMAX

ECHOMAX Active-X-Band Manuale utente

AGD

AGD 340 Manuale utente

SYMEO

SYMEO STU Manuale utente

Axis

Axis D2110-VE Manuale utente

MALA

MALA MIRA Manuale utente

Emerson

Emerson ROSEMOUNT 5300 Manuale utente

Rosemount

Rosemount 5300 Series Manuale utente

Endress+Hauser

Endress+Hauser Levelflex FMP56 Specifiche tecniche

TERMA

TERMA SCANTER 5102 Manuale utente

GSSI

GSSI UtilityScan Manuale utente

Acconeer

Acconeer A111 Manuale utente

Crosley

Crosley CR37 Manuale utente

AGD

AGD 318 Manuale utente