Kwikset Kevo Convert Manuale utente
1 / 13 © 2016 Spectrum Brands, Inc.Kevo Support: 1-800-327-5625 • www.kwikset.com/kevo/support
Adapters
66087 / 01
ENGLISH Installation and
User Guide
Parts in the boxRequired tools
Mounting plate
screws
Interior cover Interior assembly Battery pack AA batteries
Interior assembly
screws
Interior assembly
screws
Interior assembly
screws
Interior cover
screws
Interior cover
screws
Interior cover
screws
Mounting plate
screws
Mounting plate
screws
Kit “A” Kit “B” Kit “C”
Mounting plate Adapter Mounting plate Mounting plate Adapters
Ruler
Phillips screwdriver
Existing key
2 / 13 © 2016 Spectrum Brands, Inc.Kevo Support: 1-800-327-5625 • www.kwikset.com/kevo/support
13/8"or 13/4"
35 or 44 mm
Measure to conirm that your door is either
13/8" or 13/4" (35 mm or 44 mm) thick.
If you have a standard deadbolt mounted separately from the
handle below it, it is compatible with Kevo Convert.
Make sure your door is open and extend your latch bolt.
extended
Remove all existing deadbolt hardware from the interior side
of your door. Keep your deadbolt exterior in place.
deadbolt
exterior
A B
Not Compatible
Rim
Lock
Mortise
Lock
Integrated
Interior
Not Compatible Not CompatibleCompatible
1
3
2
Make sure your existing deadbolt is compatible.
Measure the thickness of your door.
Disassemble your existing deadbolt.
3 / 13 © 2016 Spectrum Brands, Inc.Kevo Support: 1-800-327-5625 • www.kwikset.com/kevo/support
D-shape
Kwikset and Weiser deadbolts:
Use kit “A” for your door.
Baldwin Reserve and
Baldwin Prestige deadbolts:
Use kit “B” for your door.
You will need the black adapter
and the thicker gold screws.
thicker
screws
Vertical rectangle
Baldwin Estate deadbolts:
Use kit “B” for your door.
You will need the gold adapter
and the thinner gold screws.
thinner
screws
Slanted rectangle
Schlage deadbolts:
Use kit “C” for your door.
You will need the silver adapter.
Horizontal rectangle
Schlage deadbolts:
Use kit “C” for your door.
You will need the gold adapter.
Look at the hole in your door.
What shape is your torque blade (the part sticking out through the latch)?
For a list of compatible deadbolt
models, please see page 11.
4Determine the parts needed for your door.
torque blade
Note: A D-shaped torque blade is shown, but installation is the same for all models.
4 / 13 © 2016 Spectrum Brands, Inc.Kevo Support: 1-800-327-5625 • www.kwikset.com/kevo/support
A
C D
Place the mounting plate on the door so that the torque
blade inserts through the center hole.
Black Components Only: To
determine which mounting
screws to use, test one of
the thicker screws irst.
If the thicker screw its, continue
installing the thicker screws.
If the thicker screw doesn't it,
install the thinner screws.
5Install the mounting plate and test your latch.
Insert your key and test the latch for smooth operation. Remove your key and make sure the bolt is fully extended.
If the latch does not
extend or retract
smoothly, adjust the
mounting screws.
fully
extended
B
Keep parallel to the
edge of the door.
Tighten
screws evenly.
Secure the mounting plate with the mounting screws.
align tabs
Gold adapter:
Keep slot vertical.
Press adapter irmly onto
the interior assembly.
5 / 13 © 2016 Spectrum Brands, Inc.Kevo Support: 1-800-327-5625 • www.kwikset.com/kevo/support
abcd
Prepare the interior assembly.
Install the adapter on the interior assembly.
A
B
Make sure the
turnpiece is in the
vertical position.
vertical
Remove the
interior cover.
Make sure shaft is oriented
as shown. If needed, rotate
the shaft to this position.
Stripe should
be vertical.
Remove the battery pack.
Do not
install
batteries
yet.
6Install the interior assembly.
Silver adapter:
Tab is on bottom.
Black adapter:
Curve is on top.
6 / 13 © 2016 Spectrum Brands, Inc.Kevo Support: 1-800-327-5625 • www.kwikset.com/kevo/support
6Install the interior assembly (continued).
n
.
RightLeft
SCHLAGE DEADBOLTS ONLY:
!
Switch #2
On your interior assembly, lip switch #2
to the top position.
Look at your mounting plate.
Is your latch bolt to the left or right of your mounting plate?
No adjustment is required.
Proceed to the next page.
7 / 13 © 2016 Spectrum Brands, Inc.Kevo Support: 1-800-327-5625 • www.kwikset.com/kevo/support
CInstall the interior assembly onto the mounting plate.
ab
Align the adapter with
the torque blade.
Schlage deadbolts only:
You may need to rotate
the adapter to align
with the torque blade.
Secure with
two (2) interior
assembly screws.
bottom hole
6Install the interior assembly (continued).
8 / 13 © 2016 Spectrum Brands, Inc.Kevo Support: 1-800-327-5625 • www.kwikset.com/kevo/support
7Perform the door handing process.
A B
C D !
status
LED
Install 4 AA batteries in the battery pack. IMPORTANT: Make sure the door is open. Insert the battery pack
while PRESSING AND HOLDING the Program button. Release the
button when the battery pack is all the way inside the lock interior.
IMPORTANT: The Status LED will lash red
and green, and the lock will beep. Press and
release the Program button again.
The latch bolt will retract and extend on its own to learn
the orientation of the door.
OTHER DEADBOLTS:
If the latch bolt does not move on its
own, or if the Status LED indicates
a door handing failure, make sure
the batteries are installed correctly,
and perform steps BD again.
The Status LED will
indicate success
or failure.
Success: LED
lashes green
Failure: LED
remains solid red.
Right
This step will teach the lock the orientation of your door and is crucial for lock operation.
Ensure correct polarity. For best
results, use new, non-rechargeable
Alkaline batteries only.
BALDWIN ESTATE DEADBOLTS ONLY:
If your latch bolt is to the RIGHT of your
interior assembly, and the Status LED
indicates a failure, press and release the
Program button again. The door handing
process will restart.
9 / 13 © 2016 Spectrum Brands, Inc.Kevo Support: 1-800-327-5625 • www.kwikset.com/kevo/support
Download the Kevo app and set up your smartphone.
Download the Kevo app at kwikset.com/kevo/app or scan the QR code below. Follow the instructions inside the app to create an account, enroll
your irst smartphone and send eKeys to family and friends.
A B
8
Remove
the
security
screw.
Install the
cover.
Install the
cover.
Secure the cover
with three (3)
interior cover
screws.
Secure the
cover with
three (3)
interior
cover
screws.
aa
bb c
10 / 13 © 2016 Spectrum Brands, Inc.Kevo Support: 1-800-327-5625 • www.kwikset.com/kevo/support
9Install the interior cover.
Important information about the interior cover:
If you want to keep the window locked: If you want to unlock the window:
If the window is unlocked,
it can slide up for more
convenient access to
programming buttons
while the cover is installed.
Note: The interior
cover and screws
must be removed for
battery pack access.
The interior cover will be
secured by three screws
to prevent someone
from removing the
battery or tampering with
your lock's settings.
The window on the interior
cover is locked by default.
window
Indice
Altri manuali Kwikset Serratura
Kwikset
Kwikset Henley 300HYL 15 Manuale utente
Kwikset
Kwikset Powerbolt 240 Manuale utente
Kwikset
Kwikset 24896/04 Manuale utente
Kwikset
Kwikset Smartcode 910 Manuale utente
Kwikset
Kwikset Powerbolt2 Manuale utente
Kwikset
Kwikset SmartCode 913 Manuale utente
Kwikset
Kwikset Deadbolt Series Manuale utente
Kwikset
Kwikset SMARTCODE 916 Manuale utente
Kwikset
Kwikset Smartcode 914 Manuale utente
Kwikset
Kwikset HALO TOUCH 959TRL Manuale di installazione e funzionamento
Kwikset
Kwikset Smartcode 914 Manuale utente
Kwikset
Kwikset 985 Manuale utente
Kwikset
Kwikset Halo Touch Manuale utente
Kwikset
Kwikset SMARTCODE 916 Manuale utente
Kwikset
Kwikset Smartcode 914 Manuale utente
Kwikset
Kwikset SmartCode Series Istruzioni per il montaggio
Kwikset
Kwikset SmartCode 912 Istruzioni operative
Kwikset
Kwikset HomeConnect 620 Manuale di istruzioni
Kwikset
Kwikset SmartCode 913 Manuale utente
Kwikset
Kwikset HALO Manuale utente
