KYLAND Technology SICOM3000 Istruzioni per il montaggio

SICOM3000 Industrial Ethernet Switch

Hardware Installation Manual

Publication Data: Jun. 2013

Version: V1.0

No.: 1.12.02.-0

SICOM3000 Industrial Ethernet Switch

Hardware Installation Manual

Disclaimer:

Kyland Technology Co., Ltd. tries to keep the content

of this manual as accurate and as updated as possible. This

document is not guaranteed to be error-free, and we reserve the

right to amend it without notice to users.

No part of this documentation may be excerpted, reproduced,

translated, annotated or duplicated, in any form or by any means

without the prior written permission of KYLAND Corporation.

Notice for Safety Operation

The product performs reliably as long as it is used accord-

ing to the guidance. Artificial damage or destruction of the

device should be avoided. Before using the device, read

this notice carefully for personal and equipment safety.

Please keep the manual for further reference. Kyland is

not liable to any personal or equipment damage caused

by violation of this notice.

●Do not place the device near water sources or damp areas. Keep

the ambient relative humidity within the range from 5% to 95%

(non-condensing).

●Do not place the device in an environment with high magnetic field,

strong shock, or high temperature. Keep the working and storage

temperatures within the allowed range.

●Install and place the device securely and firmly.

●Please keep the device clean; if necessary, wipe it with a soft cotton

cloth.

●Do not place any irrelevant materials on the device or cables. Ensure

adequate heat dissipation and tidy cable layout without knots.

●Wear antistatic gloves or take other protective measures when

operating the device.

●Avoid any exposed metal wires because they may be oxidized

or electrified.

●Install the device in accordance with related national and local

regulations.

●Before power-on, make sure the power supply is within the allowed

range of the device. High voltage may damage the device.

●Power connectors and other connectors should be firmly interconnected.

●Do not plug in or out the power supply with wet hands. When the device

is powered on, do not touch the device or any parts with wet hands.

●Before operating a device connected to a power cable, remove all

jewelry (such as rings, bracelets, watches, and necklaces) or any

other metal objects, because they may cause electric shock or burns.

●Do not operate the device or connect or disconnect cables during

an electrical storm.

●Use compatible connectors and cables. If you are not sure, contact

our sales or technical support personnel for confirmation.

●Do not disassemble the device by yourself. When an anomaly

occurs, contact our sales or technical support personnel.

●If any part is lost, contact our sales or technical support personnel

to purchase the substitute. Do not purchase parts from other channels.

●Dispose of the device in accordance with relevant national provisions,

preventing environmental pollution.

In the following cases, please immediately shut down

your power supply and contact your Kyland represen-

tative:

●Water gets into the equipment.

●Equipment damage or shell damage.

●Equipment operation or performance has abnormally changed.

●The equipment emits odor, smoke or abnormal noise.

1 Product OverviewĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ Ă Ă 1

2 Structure and InterfaceĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 2

2.1 Front PanelĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 2

2.2 Top PanelĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 6

3 MountingĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ 7

3.1 Dimension Drawing

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

3.2 Mounting Modes and Steps

ĂĂĂĂĂĂĂĂĂĂĂĂĂ

3.2.1 Mounting

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

3.2.2 Panel Mounting

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

4 Connection

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

4.1 10/100Base-T(X) Ethernet Port

ĂĂĂĂĂĂĂĂĂĂĂĂ

4.2 100Base-FX Ethernet Port

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

4.3 1000Base-X, 10/100/1000Base-T(X) SFP Slot

ĂĂĂĂĂ

4.3.1 Gigabit SFP Optical ModuleĂĂĂĂĂĂĂĂĂĂĂ

4.3.2 Gigabit SFP Electrical ModuleĂĂĂĂĂĂĂĂĂĂ

4.4 Console Port

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

4.5 Grounding

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

4.6 Power Terminal Block

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

4.7 Alarm Terminal Block

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

5 LEDs

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

6 Switch Access

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

6.1 Access through Console Port

ĂĂĂĂĂĂĂĂĂĂĂĂĂ

6.2 Access through Telnet

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

6.3 Access through Web

ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ

7 Basic Features and Specifications

ĂĂĂĂĂĂĂĂĂĂĂĂĂ

Contents

1 Product Overview

SICOM3000 includes a series of industrial Ethernet switches applied

in the wind power, distribution network automation, subway PIS and AFC,

power SCADA, sewage treatment, highway, metallurgy, hydroelectric

power, photovoltaic generation, subway CBTC, plant automation,

intelligent transportation, and many other industries.SICOM3000 is

applicable to harsh and hazardous industrial environments due to its

high-performance switching engine, solid closed housing, fanless but heat

dissipation-capable single-rib shaped chassis, overcurrent, overvoltage,

and EMC protection for power input, and sound EMC protection of RJ45

ports. The redundant network and power input support guarantees the

reliable operation of the system.

SICOM3000 provides powerful network management functions. The

device can be managed through CLI, Telnet, Web, SNMP-based and

OPC network management software.

The series switches support DIN rail and panel mounting.SICOM3000

provides up to two 1000Base-X, 10/100/1000Base-T(X) SFP slots

(gigabit SFP slots), two 100M cooper or fiber (optional) ports, and six

10/100Base-T(X) Ethernet ports. For details, see the following table.

Product Overview

Table 1 SICOM3000 Models

Note:

We reserve the right to amend the product information listed in this table without notice.

To obtain the latest information, contact our sales or technical support personnel.

Structure and Interface

2 Structure and Interface

Figure 1 Front Panel of SICOM3000-2GX-2S/M-6T

2.1 Front Panel

(1)(2)(3)(4)

(8)

(5)

Speed

Link/ACT

(7)

(6)

(9)

(10)

(11)

ƽFront Panel of SICOM3000-2GX-2S/M-6T

Caution:

It is recommended to purchase the port dustproof shield

(optional) to keep ports clean and ensure switch performance.

Structure and Interface

Table 2 Description of the Front Panel of SICOM3000-2GX-2S/M-6T

No. Identifie

Description

(1) PWR1 Power 1 LED

(2) PWR2 Power 2 LED

(3) Run Running LED

(4) Alarm Alarm LED

(5) G2 Gigabit SFP slot (G2) and its connection

status LED

(6) G1 Gigabit SFP slot (G1) and its connection

status LED

(7) 7100Base-FX Ethernet port 7 and its

connection status LED

(8) 8100Base-FX Ethernet port 8 and its

connection status LED

(9) 1-6 Six 10/100Base-T(X) Ethernet ports

(10) Speed 10/100Base-T(X) Ethernet port speed

LED (yellow)

(11) Link/ACT 10/100Base-T(X) Ethernet port connection

status LED (green)

Note:

The appearance of SICOM3000-MA-C-2GX-2S/M-6T is

identical with that of SICOM3000-2GX-2S/M-6T.

Structure and Interface

Figure 2 Front Panel of SICOM3000-2GX-8T

(1)(2)(3)(4)

(8)

(5)

Speed

Link/ACT

(7)

(6)

(9)

ƽFront Panel of SICOM3000-2GX-8T

Altri manuali per SICOM3000

Indice

Altri manuali KYLAND Technology Router di rete

KYLAND Technology

KYLAND Technology SICOM3024SM Manuale utente

KYLAND Technology

KYLAND Technology SICOM3024PT-18MB Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology SICOM3016BA-4GX-12S/M Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology KIEN5000 Manuale utente

KYLAND Technology

KYLAND Technology KIEN3016M Manuale utente

KYLAND Technology

KYLAND Technology SICOM2024M-4S/M-24T Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology KIEN1009 Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology KIEN2204S Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology KIEN6000 Manuale utente

KYLAND Technology

KYLAND Technology KIEN1008G Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology SICOM3000A Series Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology SICOM6000 Series Manuale utente

KYLAND Technology

KYLAND Technology SICOM3000A Series Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology KIEN1005G Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology SICOM6028GPT Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology SICOM3004 Manuale utente

KYLAND Technology

KYLAND Technology Opal5GS-1GX4GP-L10-L10 Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology KIEN3016A Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology SICOM3000GPT Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology KIEN7009 Series Istruzioni per il montaggio

KYLAND Technology

KYLAND Technology SICOM6000 Series Manuale utente

KYLAND Technology

KYLAND Technology SICOM3000 Manuale utente

KYLAND Technology

KYLAND Technology SICOM3024P Manuale utente

KYLAND Technology

KYLAND Technology SICOM3008PN Istruzioni per il montaggio

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza