Kyocera KM-5050 Manuale utente

KM-3050

KM-4050

KM-5050

Introduction

Thank you for your purchase of KM-3050/KM-4050/KM-5050.

This Operation Guide is intended to help you operate the machine

correctly, perform routine maintenance and take a simple troubleshooting

action as necessary, so that you can always use the machine in good

condition.

Please read this Operation Guide before you start using the machine, and

keep it close to the machine for easy reference.

In this Operation Guide, KM-3050, KM-4050 and KM-5050 are referred to

as 30 ppm model, 40 ppm model and 50 ppm model respectively.

OPERATION GUIDE i

Legal and Safety Information

Please read this information before using your machine. This

chapter provides information on the following topics.

• Legal Information..............................................................ii

• Regarding Trade Names ................................................. iii

• Energy Star (ENERGY STAR®) Program........................vi

• Safety Conventions in This Guide .................................. vii

• Caution Labels .............................................................. viii

• Installation Precautions ...................................................ix

• Precautions for Use.........................................................xi

• Laser Safety .................................................................. xiv

• Safety Instructions Regarding the Disconnection of

Power ................................................................ xv

Legal and Safety Information

ii OPERATION GUIDE

Legal Information

Copying or other reproduction of all or part of this guide without the prior

written consent of Kyocera Mita Corporation is prohibited.

Legal Restriction on Copying/Scanning

• It may be prohibited to copy/scan copyrighted material without

permission of the copyright owner.

• It is prohibited under any circumstances to copy/scan domestic or

foreign currencies.

• Local laws and regulations may prohibit or restrict copying/scanning of

other items not mentioned above.

Legal and Safety Information

OPERATION GUIDE iii

Regarding Trade Names

• KPDL is a trademark of Kyocera Corporation.

• Microsoft, MS-DOS, Windows, Windows NT and Internet Explorer are

registered trademarks of Microsoft Corporation in the U.S.A. and/or

other countries.

• Windows Me and Window XP are trademarks of Microsoft

Corporation.

• PCL is a trademark of Hewlett-Packard Company.

• Adobe Acrobat, Adobe Reader and PostScript are trademarks of

Adobe Systems, Incorporated.

• Ethernet is a registered trademark of Xerox Corporation.

• Novell and NetWare are registered trademarks of Novell, Inc.

• Centronics is a trademark of Centronics Data Computer Corporation.

• IBM and IBM PC/AT are trademarks of International Business

Machines Corporation.

• Power PC is a trademark of IBM in the U.S.A. and/or other countries.

• AppleTalk is a registered trademark of Apple Computer, Inc.

• CompactFlash and CF are trademarks of SanDisk, Inc.

• PC-PR201/65A is a product of NEC Corporation.

• VP-1000 is a product of Seiko Epson Corporation.

• This machine has been developed using embedded real-time

operating system Tornado™ by Wind River Systems, Inc.

• PCL6, a command language of HP LaserJet emulated by this

machine, is using the compatible system PeerelessPrintXL developed

by Peerless Systems Corporation. PeerelessPrintXL is a trademark of

Peerless Systems Corporation (2381 Rosecrans Ave. ElSegundo, CA

90245, U.S.A.).

• TrueType is a registered trademark of Apple Computer, Inc.

• DFHSGOTHIC-W5 and DFHSMINCHO-W3 are Heisei fonts. Kyocera

Mita Corporation is using these fonts under agreements with the

Japanese Standards Association. Any form of reproduction of these

fonts without prior consent of Kyocera Mita Corporation is prohibited.

• Heisei fonts have been developed by the working groups in

collaboration with the Japanese Standards Association. Reproduction

of these fonts without permission is prohibited.

• TypeBankG-B, TypeBankM-M and Typebank-OCR are trademarks of

TypeBank®.

• All European language fonts installed in this machine are used under

licensing agreement with Monotype Imaging Inc.

• Helvetica, Palatino and Times are registered trademarks of Linotype-

Hell AG.

• ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery and ITC

ZapfDingbats are registered trademarks of International Type-face

Corporation.

Legal and Safety Information

iv OPERATION GUIDE

• UFST™ MicroType®fonts by Monotype Imaging Inc. are installed in

this machine.

• This machine contains the NF module developed by ACCESS Co.,

Ltd.

• This machine contains the software having modules developed by

Independent JPEG Group.

All other brands and product names are registered trademarks or

trademarks of their respective companies. The designations ™ and ® will

not be used in this Operation Guide.

GPL

Firmware of this machine is using in part the GPL applied codes

(www.fsf.org/copyleft/gpl.html). Please access /www.kyoceramita.com/gpl

for more information on how to make GPL applied codes available.

Monotype Imaging License Agreement

1Software shall mean the digitally encoded, machine readable,

scalable outline data as encoded in a special format as well as the

UFST Software.

2You agree to accept a non-exclusive license to use the Software to

reproduce and display weights, styles and versions of letters,

numerals, characters and symbols (Typefaces) solely for your own

customary business or personal purposes at the address stated on

the registration card you return to Monotype Imaging. Under the

terms of this License Agreement, you have the right to use the Fonts

on up to three printers. If you need to have access to the fonts on

more than three printers, you need to acquire a multi-user license

agreement which can be obtained from Monotype Imaging.

Monotype Imaging retains all rights, title and interest to the Software

and Typefaces and no rights are granted to you other than a License

to use the Software on the terms expressly set forth in this

Agreement.

3To protect proprietary rights of Monotype Imaging, you agree to

maintain the Software and other proprietary information concerning

the Typefaces in strict confidence and to establish reasonable

procedures regulating access to and use of the Software and

Typefaces.

4You agree not to duplicate or copy the Software or Typefaces, except

that you may make one backup copy. You agree that any such copy

shall contain the same proprietary notices as those appearing on the

original.

5This License shall continue until the last use of the Software and

Typefaces, unless sooner terminated. This License may be

terminated by Monotype Imaging if you fail to comply with the terms

of this License and such failure is not remedied within thirty (30) days

after notice from Monotype Imaging. When this License expires or is

Legal and Safety Information

OPERATION GUIDE v

terminated, you shall either return to Monotype Imaging or destroy all

copies of the Software and Typefaces and documentation as

requested.

6You agree that you will not modify, alter, disassemble, decrypt,

reverse engineer or decompile the Software.

7Monotype Imaging warrants that for ninety (90) days after delivery,

the Software will perform in accordance with Monotype Imaging-

published specifications, and the diskette will be free from defects in

material and workmanship. Monotype Imaging does not warrant that

the Software is free from all bugs, errors and omissions.

The parties agree that all other warranties, expressed or implied,

including warranties of fitness for a particular purpose and

merchantability, are excluded.

8Your exclusive remedy and the sole liability of Monotype Imaging in

connection with the Software and Typefaces is repair or replacement

of defective parts, upon their return to Monotype Imaging.

In no event will Monotype Imaging be liable for lost profits, lost data,

or any other incidental or consequential damages, or any damages

caused by abuse or misapplication of the Software and Typefaces.

9Massachusetts U.S.A. law governs this Agreement.

10 You shall not sublicense, sell, lease, or otherwise transfer the

Software and/or Typefaces without the prior written consent of

Monotype Imaging.

11 Use, duplication or disclosure by the Government is subject to

restrictions as set forth in the Rights in Technical Data and Computer

Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or

subparagraph (c)(1)(ii), as appropriate. Further use, duplication or

disclosure is subject to restrictions applicable to restricted rights

software as set forth in FAR 52.227-19 (c)(2).

12 You acknowledge that you have read this Agreement, understand it,

and agree to be bound by its terms and conditions. Neither party

shall be bound by any statement or representation not contained in

this Agreement. No change in this Agreement is effective unless

written and signed by properly authorized representatives of each

party. By opening this diskette package, you agree to accept the

terms and conditions of this Agreement.

Legal and Safety Information

vi OPERATION GUIDE

Energy Star (ENERGY STAR®) Program

We have determined as a participating company in the International

Energy Star Program that this machine is compliant with the standards laid

out in the International Energy Star Program.

International Energy Star Program has as its basic goals the promotion of

efficient energy use and the reduction of the environmental pollution that

accompanies energy consumption by promoting the manufacture and sale

of products that fulfill program standards.

International Energy Star Program standards require that multi-function

machines come equipped with a Low Power Mode where energy

consumption is reduced after a certain amount of time elapses since the

machine was last used, as well as an Off Mode where the machine

automatically turns itself off after there is no activity within a set amount of

time. When the machine includes printer and fax functions, the printer and

fax must enter a Low Power Mode where power consumption is

automatically reduced after a certain amount of time elapses since they

were last used, and they must also support a Sleep Mode where power

consumption is reduced to a minimum when there is not activity within a

set amount of time.

This machine is equipped with the following features as a result of its

compliance with International Energy Star Program standards.

This machine has a Sleep Mode only to attain further savings of energy.

Sleep

The machine automatically enters Sleep when 10 minutes (30 and 40 ppm

models) or 15 minutes (50 ppm model) have passed since the machine

was last used. The amount of time of no activity that must pass before

Sleep is activated may be lengthened. For more information refer to Sleep

and Auto Sleep on page 3-4.

Automatic 2-Sided Copy Functions

The Energy Star Program encourages the use of 2-sided copying which

reduces the load on the environment and this machine includes 2-sided

copying as a standard function. For example, by copying two 1-sided

originals onto a single sheet of paper as a 2-sided copy, it is possible to

lower the amount of paper used. For more information refer to Duplex

Copying on page 3-13.

Paper Recycling

The Energy Star Program encourages the use of environmentally friendly

recycled paper. Your sales or service representative can provide

information about recommended paper types.

About the International Energy Star Program

Legal and Safety Information

OPERATION GUIDE vii

Safety Conventions in This Guide

The sections of this guide and parts of the machine marked with symbols

are safety warnings meant to protect the user, other individuals and

surrounding objects, and ensure correct and safe usage of the machine.

The symbols and their meanings are indicated below.

Symbols

The Usymbol indicates that the related section includes safety warnings.

Specific points of attention are indicated inside the symbol.

The symbol indicates that the related section includes information on

prohibited actions. Specifics of the prohibited action are indicated inside

the symbol.

The zsymbol indicates that the related section includes information on

actions which must be performed. Specifics of the required action are

indicated inside the symbol.

Please contact your service representative to order a replacement if the

safety warnings in this Operation Guide are illegible or if the guide itself is

missing (fee required).

WARNING: Indicates that serious injury or even death may result

from insufficient attention to or incorrect compliance with the

related points.

CAUTION: Indicates that personal injury or mechanical damage

may result from insufficient attention to or incorrect compliance

with the related points.

.... [General warning]

.... [Warning of danger of electrical shock]

.... [Warning of high temperature]

.... [Warning of prohibited action]

.... [Disassembly prohibited]

.... [Alert of required action]

.... [Remove the power plug from the outlet]

.... [Always connect the machine to an outlet with a ground

connection]

Legal and Safety Information

viii OPERATION GUIDE

Caution Labels

Caution labels have been attached to the machine at the following

locations for safety purposes. Be sufficiently careful to avoid fire or electric

shock when removing a paper jam or when replacing toner.

Do not attempt to incinerate the toner

container or the waste toner box.

Dangerous sparks may cause burns.

NOTE: Do not remove these labels.

The area indicated in the

label carries high

temperature. Do not

touch parts in this area,

because there is a danger

of getting burned.

The area indicated in the label

carries high voltage. Never

touch parts in this area, because

there is a danger of electric

shock.

The area indicated in the

label carries high

temperature. Do not

touch parts in this area,

because there is a danger

of getting burned.

Moving parts inside. Do not

touch parts in this area,

because there is a danger of

injury.

Altri manuali per KM-5050

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Kyocera Stampante tutto in uno

Kyocera

Kyocera copier Manuale utente

Kyocera

Kyocera KM-6030 Manuale utente

Kyocera

Kyocera ECOSYS M6535cidn Manuale utente

Kyocera

Kyocera KM-1500 Manuale utente

Kyocera

Kyocera KM-C2630D Manuale utente

Kyocera

Kyocera KM-C2230 Manuale utente

Kyocera

Kyocera FS-1020MFP Manuale utente

Kyocera

Kyocera 508ci Manuale utente

Kyocera

Kyocera FS-4300DN Manuale utente

Kyocera

Kyocera TASKalfa 3050ci Manuale di installazione e funzionamento

Kyocera

Kyocera PointSource Ai 4040 Manuale

Kyocera

Kyocera ECOSYS M3040dn Manuale utente

Kyocera

Kyocera FS-1028MFP DP Manuale utente

Kyocera

Kyocera TASKalfa 250ci Manuale utente

Kyocera

Kyocera ECOSYS FS-C2626MFP Manuale utente

Kyocera

Kyocera ECOSYS FS-3540MFP Manuale utente

Kyocera

Kyocera TASKalfa 181 Manuale utente

Kyocera

Kyocera ECOSYS P4060DN Manuale utente

Kyocera

Kyocera TASKalfa 420i Manuale utente

Kyocera

Kyocera FS-1025MFP Manuale utente

Kyocera

Kyocera TASKalfa 181 Manuale utente

Kyocera

Kyocera FS-1116MFP Manuale utente

Kyocera

Kyocera MA2000 Manuale utente

Kyocera

Kyocera TASKalfa 650c Istruzioni di installazione e manutenzione

Manuali Stampante tutto in uno popolari di altre marche

Triumph Adler

Triumph Adler DC 2016 Manuale

Epson

Epson WorkForce WF-2510 Guida utente

Epson

Epson Stylus Scan 2000 Manuale di installazione e funzionamento

Epson

Epson PictureMate Snap PM 240 Manuale di istruzioni

Konica Minolta

Konica Minolta bizhub C35 Manuale utente

Brother

Brother MFC-J430w Manuale utente

Konica Minolta

Konica Minolta BIZHUB 558 Manuale utente

Lexmark

Lexmark MX710 Series Manuale

Brother

Brother MFC-9760 Manuale utente

Lexmark

Lexmark XC8155 Manuale utente

Lexmark

Lexmark X642E Manuale utente

Sharp

Sharp MX-2310U Guida

Aficio

Aficio 200 Manuale utente

Canon

Canon ImageCLASS 2300 Manuale

Ricoh

Ricoh Pro C900 Manuale utente

Lexmark

Lexmark X925 Manuale utente

Brother

Brother Business Smart MFC-J4510dw Manuale utente

Epson

Epson Stylus CX8400 Series Manuale utente