L-Mark LK-330E Manuale utente
1
User’s Manual
LK-330E
Label and Mark Printer
LABEL & MARK INDUSTRIES COMPANY
USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
Contents
Chapter I Foreword .......................................................................................................................3
Chapter II Preparation ................................................................................................................8
2.1 Configuration of the Main Unit...........................................................................................8
2.1.1 Basic configuration...............................................................................................8
2.1.2 List of consumables provided.............................................................................9
2.2 Nomenclature and Functions.............................................................................................11
2.2.1 Main unit ..............................................................................................................11
2.2.2 LCD display description.....................................................................................11
2.2.3 Keyboard..............................................................................................................13
2.3 Installation.........................................................................................................................15
2.3.1 Installation and removal of Ribbon ..................................................................15
2.3.2 Installation and removal of printing material cassette...................................17
2.3.3 Installation of sleeve tube guide.......................................................................18
2.3.4 Installation of sleeve tube..................................................................................19
2.3.5 Removal of sleeve tube guide..........................................................................20
2.3.6 Connection of AC power adaptor.....................................................................20
2.3.7 Connection of data cable...................................................................................20
2.3.8 Power switch.......................................................................................................21
Chapter III Basic Operation.......................................................................................................22
3.1 Power-on ...........................................................................................................................22
3.1 Selection of Printing Material ...........................................................................................22
3.2 Selection of Printing Material Specifications....................................................................22
3.2.1 Selection of sleeve tube specifications ...........................................................22
3.2.2 Selection of label specifications.......................................................................23
3.2.3 Selection of heat shrink tube specifications ...................................................23
3.2.4 Selection of Font Size........................................................................................24
3.2.5 Change Character Size.....................................................................................24
3.3 Enter Print Contents ..........................................................................................................25
3.4 Insertion ............................................................................................................................26
3.5 Change of Contents...........................................................................................................27
Chapter IV Function Keys .......................................................................................................28
4.1 Notes to Function Keys.....................................................................................................28
4.2 Instructions for Function Keys..........................................................................................29
4.2.1 Medium ................................................................................................................29
4.2.2 Length ..................................................................................................................30
4.2.3 [] Orientation ..........................................................................................31
4.2.4 Font size ..............................................................................................................32
4.2.5 Spacing ................................................................................................................33
4.2.6 Density.................................................................................................................33
4.2.7 Frame...................................................................................................................34
4.2.8 Number ................................................................................................................35
USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
2
4.2.9 Repeat..................................................................................................................37
4.2.10 Alignment...........................................................................................................38
4.2.11 Double Line .......................................................................................................40
4.2.12 PC Conn............................................................................................................40
4.2.13 File......................................................................................................................41
4.2.14 Delete all............................................................................................................43
4.2.15 Symbol...............................................................................................................44
4.2.16 Delete.................................................................................................................44
4.2.17 Cancel................................................................................................................45
4.2.18 Superscript........................................................................................................45
4.2.19 Subscript............................................................................................................45
4.2.20 Text head...........................................................................................................46
4.2.21 Text end .............................................................................................................46
4.2.22 Cutting set.........................................................................................................46
4.2.22 Cut depth...........................................................................................................46
4.2.23 Print Scope........................................................................................................48
4.2.24 Print....................................................................................................................48
4.2.25 Capital................................................................................................................48
4.2.26 Language...........................................................................................................49
4.2.27 Back Off.............................................................................................................49
4.2.28 Backspace.........................................................................................................49
4.2.29 [Shift]..................................................................................................................50
4.2.30 Revise................................................................................................................50
4.2.31 Create a new page...........................................................................................53
4.2.32 Display brightness adjustment.......................................................................53
4.2.33 Key combination...............................................................................................53
Chapter V Specifications Description ......................................................................................54
Chapter VI Others......................................................................................................................55
6.1 Specifications of Original Consumables ...........................................................................55
6.2 Simple Trouble-shooting...................................................................................................56
6.2 Warranty Card ...................................................................................................................57
USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
3
Chapter I Foreword
Welcome to use LK-330E label & mark printer! This manual describes the features of
LK-330E and the points of attention during operating and using it. Please study this
manual to have an adequate understanding of LK-330E features before you use this
machine so as to take a better advantage of it. After reading it, keep this manual
properly for future reference.
[Statement]
1. The “
L-MARK
” are the registered trade marks of Label & Mark Industries
Company.
2. The contents of this manual shall not be altered without prior consent. The
Company reserves the right to bring changes to the products concerning
technologies, parts and components, software and hardware. For more
information about the products, please contact
L-MARK
or the sale agents.
3. Without the prior written approval by
L-MARK
, no contents of this manual
shall be copied or transmitted in any form or by any means.
4. The Company is not to be held responsible for any consequences that may arise
from any operations not conforming to the instructions contained in this manual.
5. Other signs and trade marks referenced in this manual are owned by their
respective owners.
6. This manual is subject to change without prior notice.
7. For more information about this equipment and the Company, please visit
www.lmark.net.
[Safety Instructions]
Please study the following before you begin to use this printer:
1. Safety warning
Warning: The print head generates heat. Do not touch it or other
parts around it during printing or shortly after printing.
Warning: Do not touch the print head face or the connector;
otherwise the print head may be damaged as a result of
static.
USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
4
Warning: This equipment is fitted with a cutting knife. Do not put
your fingers near it during use. Be careful to keep clear
of the cutting knife during handling.
2. Points of attention
1) The printer shall be put on a flat and stable place.
2) Do not use the printer or store it in hot, damp or heavily polluted places. Besides,
keep it sheltered from sunshine, bright light and heat sources.
3) Do not put the printer in a place which is under the influence of vibration or
impact.
4) Do not allow damp air condensate on the surface of the printer. If there is any
condensate water, do not turn on the printer power supply before the condensate
water disappears.
5) Connect the printer’s power adaptor to a suitable earthed power socket. Avoid
sharing a same power socket with other large dynamos or other equipment that
may give rise to voltage fluctuation.
6) If the printer is expected to be idle for a long time, disconnect the printer from
the power supply.
7) Be careful to avoid introducing water or conducting matters (like metals) into
the printer. Disconnect the power supply immediately in case of such
introduction.
8) Do not print if there is no print material loaded, otherwise the printer rubber roll
and print head may be severely damaged.
9) Disconnect the power supply before making connection or disconnection;
otherwise the printer control circuit may be damaged.
10) Do not attempt to dismantle the printer to repair by yourself. Unauthorized
dismantling or alteration of this printer is prohibited, otherwise the high-voltage
components inside may give rise to fire accident or electric shock.
11) For the benefit of safety, when the “protective cover” is opened the printer will
not work. Therefore, put on the protective cover when printing. During opening
the “protective cover”, do not let any object touch the moving parts of the
printer.
12) In order to avoid getting electric shock, do not plug or unplug any connections
USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
5
with a wet hand.
13) Do not use AC power supply exceeding 110V—240V in voltage.
14) Keep the tube printer away from alcohol, gasoline and other volatile solvents;
keep it away from fire to avoid explosion or burning.
15) Clean the printer with a wrung wet cotton cloth. Use of organic and flammable
solvent is prohibited.
16) In case of strange odor or noises during operation, switch off the printer
immediately and disconnect the power supply and then contact your sale agent.
17) Stop the printer immediately if any foreign matter is introduced inside the
printer in order to avoid damaging it.
18) This printer prints only on sleeve tubes or heat shrink tubes with Ф≦6.0mm.
Printing on tubes Ф>6.0mm may damage the printer.
USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
6
[Caution]
1. Not all consumables are compatible with your machine. Compatibility is
dependent on the features and specifications of consumables. Please use original
L-MARK
consumables, which ensure a steady printing quality and help protect
your machine.
2. Use of non-original ribbon or label will invalidate the warranty.
3. Do not blockade the ribbon or label exit opening.
4. Do not strike the keyboard forcefully.
5. Do not pull out the print-out by force. Remove the print-out until it is cut off,
otherwise the printing quality may be compromised or your machine may be
damaged.
6. Consumables or machine shall be kept in a dry, room-temperature, and well
ventilated place sheltered from direct sunshine.
7. This printer is designed so as to ensure a good printing quality on sleeve tubes,
heat shrink tubes, labels, and transparent tubes; however no perfect quality for all
types of printing is implied. Please print some trial samples in advance.
8. When printing PVC sleeve tubes, please use “tube guide” designed specially for
this printer.
USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
7
[Description of features]
Full English operation interfaces, possible to enter English, numbers, symbols;
various editing functions enabled;
Ultra-large screen, three-line input and display; each line capable of showing 15
English letters;
Fashionable and top-grade white background light LCD display, with status
information of more than 10 functions displayed;
Fully automatic semi-cutting or full-cutting operation;
One-key operation: all functions can be performed by pressing only one key, thus
offering a convenient and quick operation;
International standard 85-key computer keyboard;
Beautiful
L-MARK
font type, offering a clearer and more lasting print out;
With a unique function of printing selected pages, enabling you to print selected
pages in the current file;
Ultra-large in-built file memory capacity, able to store more than 100 files, ready
to be recalled at any time;
L-MARK
hi-speed computerized tube printer LK-330PC can be connected to a
computer and
L-MARK
software offers new and versatile man-machine
interfaces, compatible with Windows2000/XP operation systems; independent
operation at the work site is possible, one machine designed for dual operations;
Portable design, suitable to be used for various applications;
Ribbons available in black, red, blue and white colors.
USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
8
Chapter II Preparation
This chapter mainly describes the key components of the equipment and how to
install the ribbons and printing materials. The function of each key is also described.
2.1 Configuration of the Main Unit
2.1.1 Basic configuration
1. LK-330E label and mark printer 1 piece
2. Warrantycard 1sheet
3. Packing list 1 sheet
4. Power adaptor (including power cable) 1 piece
5. Black ribbon for familiarizing purpose 1 cartridge
6. Sleeve tube guide 1 piece
7. Editing software and User’s manual CD 1 CD
8. Computer connection cable 1 piece
9. Handbag 1 piece
USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
9
2.1.2 List of consumables provided
species specification Model Package
Label cassette tape (White 6mm) LM506WL 5pcs(20m×5)/box
Label cassette tape (White 9mm) LM509WL 5pcs(20m×5)/box
Label cassette tape (White 12mm) LM512WL 5pcs(20m×5)/box
Label cassette tape (Yellow 6mm) LM506YL 5pcs(20m×5)/box
Label cassette tape (Yellow 9mm) LM509YL 5pcs(20m×5)/box
Label cassette tape (Yellow 12mm) LM512YL 5pcs(20m×5)/box
Label cassette tape (Silver 6mm) LM506SL 5pcs(20m×5)/box
Label cassette tape (Silver 9mm) LM509SL 5pcs(20m×5)/box
Labels
Label cassette tape (Silver 12mm) LM512SL 5pcs(20m×5)/box
Ribbon cassette (black) LM33B 5pcs(80m×5)/box
Ribbon cassette (white) LM33W 5pcs(80m×5)/box
Ink ribbons
Ribbon cassette (red) LM33R 5pcs(80m×5)/box
2:1 heat shrink tube cassette (White 3.0mm) LM-ST30W 5pcs(5m×5)/box
2:1 heat shrink tube cassette (Yellow 3.0mm) LM-ST30Y 5pcs(5m×5)/box
2:1 heat shrink tube cassette (White 5.2mm) LM-ST52W 5pcs(4m×5)/box
2:1 heat shrink tube cassette (Yellow 5.2mm) LM-ST52Y 5pcs(4m×5)/box
2:1 heat shrink tube cassette (White 6.8mm) LM-ST68W 5pcs(4m×5)/box
Shrink
tubes
2:1 heat shrink tube cassette (Yellow 6.8mm) LM-ST68Y 5pcs(4m×5)/box
Cutter Cutter (cutter holder and cutting blade) LM-02-10 2pcs/box
Altri manuali per LK-330E
1
Indice
Altri manuali L-Mark Etichettatrice
