La Crosse Technology 404-3556A Manuale utente

1 | Page

22” Indoor | Outdoor Atomic Wall Clock

Model: 404-3556A

DC: 122816

www.lacrossetechnology.com/404-3556a

2 | Page

Get Started

1. Remove round battery cover to access clock movement and

battery compartment(s).

2. Insert 1 AA battery into the movement at the center of the clock.

3. OPTIONAL: For extended battery life, install two additional

batteries, one on either side of the movement.

4. Select your specific time zone by firmly pressing the correct time

zone button once. Replace battery cover.

5. The default time zone is Pacific Time. If the clocks sets and the

hours are off, hold the correct time zone button for 5 seconds to

correct.

Position Clock

•Indoor:Choose a location 6 feet or more from electronics such as

cordless phones, wireless gaming systems, televisions, microwaves,

routers, baby monitors, etc., which can prevent signal reception.

•Position near an exterior wall that faces Ft. Collins, Colorado for

WWVB time signal reception.

•The antenna is available for signal reception when the front or back

of the clock faces Colorado.

•Outdoor:Choose a location with an overhang to protect the clock

from the overhead sun or standing snow or rain.

•A shaded location will prevent inaccurate temperature readings.

Mount the clock on a wall with the hanging hole on the back of the

clock. Be sure the battery cover is on snug.

Round

Battery

Cover

3 | Page

Manual Set Time

On rare occasions in certain areas, the clock may not be able to receive

the radio controlled time signal due to the strength of the signal or the

geographic location. In this case, the clock can be set manually and

used as a regular quartz wall clock.

Note:Allow up to five nights for the clock to receive the WWVB signal

before manually setting the time.

Set the clock manually:

1. Remove battery for 15 minutes and press the Time Set tab 20 times.

2. After 15 minutes, insert the battery and allow the clock to spin to

12:00, 4:00 or 8:00.

3. Hold the Time Set Tab and the hands will spin. Continue holding

until the correct time is achieved.

Note: You can only set the clock manually for about 2 minutes after the

battery is inserted. If the clock receives the WWVB time signal, this

signal will override manually set time.

Daylight Saving

Time Indicator

Time Zone Buttons

Time Set Tab

3 Battery

Compartments

4 | Page

Temperature and Humidity

The La Crosse Technology®atomic wall clock has two analog sensors

that measure surrounding temperature and humidity. The temperature

information is displayed in degrees Fahrenheit and Celsius, and humidity

data is displayed in percentage.

The thermometer and hygrometer have been calibrated at the factory.

To check the sensors accuracy, tune to your local weather forecast

information broadcast for the latest weather information. The sensors

may be adjusted.

To manually adjust the sensors, gently turn the temperature or humidity

sensor adjustment on the back of the clock until desired setting has been

reached. Daylight Saving Time

The National Institute of Standards and Technology and WWVB encode

a special DST “bit” in the WWVB transmission for DST. Your clock will

read this information and automatically advance the hands one hour in

the spring and eleven hours in the fall.

Arizona: If you live in an area that does not recognize DST, you must

press the DST button one time only to turn OFF.

Outer ring

displays

temperature

in degrees

Fahrenheit

Inner ring

displays

temperature

in degrees

Celsius

Humidity

display

in %

Calibration for

thermometer

Calibration for

hygrometer

5 | Page

Atomic Time Signal

For information about WWVB, atomic time signal visit:

http://bit.ly/AtomicTime

Signal Interference

In some cases, the signal is affected by weather conditions and electrical

interferences, or the location of the clock itself may result in poor

reception. If the clock has not synchronized to the correct time within a

few days of activation, you may need to move the clock to a different

location.

Visit Us on Social Media

Care and Maintenance

•Do not mix old and new batteries

•Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

•Always purchase the correct size and grade of battery most suitable

for intended use.

•Replace all batteries of a set at the same time.

•Clean the battery contacts and also those of the device prior to

battery installation.

•Ensure the batteries are installed with correct polarity (+ and -).

http://bit.ly/LaxTech_YouTube

http://bit.ly/LaxTech_Facebook

http://bit.ly/LaxTech__Twitter

http://bit.ly/LaxTech_Pinterest

6 | Page

•Remove batteries from equipment that is not to be used for an

extended period of time.

•Promptly remove expired batteries.

Specifications

Battery Requirements: 1 AA (IEC LR6) required in movement

(Alkaline recommended)

Optional: 2 additional AA (IEC LR6) batteries for extended battery life.

Battery life: 1 battery; over 12 months

3 batteries; over 36 months

Warranty and Support Information

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from

date of purchase) on this product relating to manufacturing defects in

materials & workmanship.

Before returning a product, please contact our friendly customer support

with questions or visit our online help.

Phone: 1-608-782-1610

Online: www.lacrossetechnology.com/support

View full warranty details online at:

http://www.lacrossetechnology.com/support/?type=warranty

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali La Crosse Technology Orologio

La Crosse Technology

La Crosse Technology BBB86118v3 Manuale utente

La Crosse Technology

La Crosse Technology WS-8007U-C Manuale utente

La Crosse Technology

La Crosse Technology 513-149V2 Manuale utente

La Crosse Technology

La Crosse Technology WT-3102B Manuale utente

La Crosse Technology

La Crosse Technology T82394 Manuale utente

La Crosse Technology

La Crosse Technology WT-3143H Manuale

La Crosse Technology

La Crosse Technology WT-5120 433 Manuale utente

La Crosse Technology

La Crosse Technology WS-8418U-IT Manuale utente

La Crosse Technology

La Crosse Technology WS-8016U Manuale utente

La Crosse Technology

La Crosse Technology 513-1419-WA Manuale utente

La Crosse Technology

La Crosse Technology WS-8120U Manuale utente

La Crosse Technology

La Crosse Technology 403-3246BR Manuale utente

La Crosse Technology

La Crosse Technology BBB86088 Manuale utente

La Crosse Technology

La Crosse Technology 404-1220v2 Manuale utente

La Crosse Technology

La Crosse Technology WS-8117 Manuale utente

La Crosse Technology

La Crosse Technology 513-1417V2 Dimensioni

La Crosse Technology

La Crosse Technology WT-3181PLX1 Dimensioni

La Crosse Technology

La Crosse Technology WS-6002U Manuale utente

La Crosse Technology

La Crosse Technology 404-3840CA Manuale utente

La Crosse Technology

La Crosse Technology BBB82684 Manuale utente

La Crosse Technology

La Crosse Technology 515-1912 Dimensioni

La Crosse Technology

La Crosse Technology 513-1918S Manuale utente

La Crosse Technology

La Crosse Technology WT-8002U Manuale utente

La Crosse Technology

La Crosse Technology WT-3128 Manuale

Manuali Orologio popolari di altre marche

Silicon Laboratories

Silicon Laboratories SI5324 Manuale utente

Heathkit

Heathkit GC-1005 Manuale utente

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuale utente

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuale utente

ALGE-Timing

ALGE-Timing ASC3 Manuale utente

Bodet

Bodet Profil 960 Manuale utente

Nixie Clock

Nixie Clock Divergence Meter Manuale utente

Mini Gadgets

Mini Gadgets MCPro Manuale utente

Casio

Casio TMR-200 Manuale utente

Progetti

Progetti ILTEMPOSTRINGE Manuale

BVItech

BVItech BV-101 Manuale utente

Progetti

Progetti KALIMERO Manuale

Sharp

Sharp SPC900 Manuale utente

Datexx

Datexx DF0063 Manuale utente

LG LEC-005 Manuale utente

IKEA

IKEA ROTBLÖTA Manuale utente

U-Line

U-Line Н-2811 Manuale utente

Digiview

Digiview RC305EL Manuale utente