La Crosse Technology 512-1422WH Manuale utente

SET UP GUIDE

MODEL: 512-1422WH

Atomic Digital Wall Clock

1. Insert 2-AA batteries into your Outdoor Sensor.

2. Insert 2-AA batteries Into your Atomic Clock.

3. Enter the Settings Menu to adjust your time and date.

4. Once the sensor is reading to your clock, place the senor outside in a

shaded location. View our sensor mounting video here:

bit.ly/th_sensor_mounting

POWER UP

ATOMIC TIME

Atomic Clock

512-1422WH

Outdoor Sensor

TX141v3

• The clock will search for the Atomic Time Signal at power up and at UTC

7:00, 8:00, 9:00, 10:00, and 11:00.

• The Atomic Time Signal Icon will ﬂash while searching and be solid

when it has connected.

• From the normal time display, hold the (-) MINUS button to manually start

or stop a search for the WWVB time signal. For information about WWVB

visit: bit.ly/AtomicTime

1. Hold the SET button until the display changes to enter the Settings

Menu.

2. Press and release the + or - buttons to adjust values. Hold to adjust

quickly.

3. Press and release the SET button to conﬁrm values and move to the next

setting or exit the menu.

Settings Menu Order:

• Atomic Time ON/OFF

• Time Zone

• Daylight Saving Time ON/OFF

• 12/24 Hour Time Format

• Hour

• Minutes

• Year

• Month

• Date

Notes:

• Atomic Time: If Atomic OFF is selected, the menu will skip the DST

and Time Zone settings and move straight to the 12/24-Hour Time

Format setting.

• Daylight Saving Time: If you live in an area that follows DST, keep this

setting ON. If your area does not follow DST, turn this setting OFF.

• Weekday: Your weekday display will adjust automatically once you

have your Year, Month, and Date settings set correctly. 3

SETTINGS MENU

Time Zones

AST = Atlantic

EST = Eastern

CST = Central

MST = Mountain

PST = Paciﬁc

AKT = Alaska

HAT = Hawaii

Set Alarm:

1. Hold the ALARM button until the letters “AL” show in the weekday area.

2. Press and release the +or - button to adjust the values. Hold to

adjust quickly.

3. Press and release the ALARM button to confirm and move to the next

item or exit.

TIME ALARM

Silence a Sounding Alarm: Press any button except SNOOZE to silence the

alarm for 24 hours.

Activate/Deactivate Alarm:

• Press and release the ALARM button to view the Alarm Time. Press

and release again to activate or deactivate the alarm.

• The Alarm Icon will show when alarm is active.

Snooze: When the alarm is active, press the SNOOZE button to silence

the alarm for 10 minutes. Zz will show.

Note: The alarm will sound with increasing frequency for two minutes,

then shut off automatically if not silenced.

FORECAST ICONS

• The forecast icons use the clock’s internal barometer to predict conditions

to come within the next 12 hours.

• Allow 7-10 days for station calibration for most accurate forecasts.

• For more forecast information watch our video here: bit.ly/forecast_vid

Sunny Storm

Raindrops ﬂash

RainCloudsPartly Cloudy

FORECAST TREND ARROWS

The Forecast Trend Arrows indicate the rising and falling of atmospheric

pressure in your area over the past 3 hours.

Pressure has risen over the past 3 hours.

Pressure has been steady over the past 3 hours.

Pressure has fallen over the past 3 hours.

Press and release the SET button to switch between Fahrenheit or Celsius

Temperature Display. Your clock will stay on the selection.

FAHRENHEIT or CELSIUS

TEMPERATURE TREND ARROWS

Both the Indoor and Outdoor Temperature values have Trend Arrows to

indicate changes (2°F/1°C or more) over the past one hour period.

Temperature has risen over the past hour.

Temperature has been steady over the past hour.

Temperature has fallen over the past hour.

LOW BATTERY INDICATOR

Low Battery Icon by Outdoor Temperature, replace batteries in the

Outdoor Sensor.

Low Battery Icon by Indoor Temperature, replace batteries in the Clock.

BUTTON FUNCTIONS

SET

Press and release to select Fahrenheit or Celsius Temperature Display.

Hold until the display changes to enter the Settings Menu.

Settings: Press and release to move to next menu item.

Hold to search for Atomic Time Signal.

Settings: Press to adjust settings. Hold to adjust quickly.

Hold until the display changes to search for Outdoor Sensor.

Settings: Press to adjust settings. Hold to adjust quickly.

When alarm sound, press and relase to silence alarm for 10 minutes.

Hold until the display changes to enter the Alarm Settings.

Press and release to view alarm time. Press again to activate/deactivate alarm.

ALARM

SNOOZE

SENSOR WEATHER SHIELD

• The Sensor Weather Shield (sold separately) is designed to

protect your outdoor sensor from rain and snow.

• This shield will oer limited protection from the sun’s heat.

• Optional purchase at: bit.ly/925-1418

SEARCH FOR OUTDOOR SENSOR

If you are seeing dashes for your outdoor readings, please try the

following steps:

1. Hold the PLUS button to search for your outdoor sensor. The Reception

Indicator will begin to animate.

2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside

next to the display and remove power from both the sensor and clock.

3. Press any button on the clock 20 times and leave the parts sit for a few

moments with the power o.

4. Install a new set of alkaline batteries into the sensor, then into your clock.

For additional help visit: bit.ly/basic_restart

5. If your outdoor data is still not appearing after these steps, please

contact our support sta via the links below.

WE’RE HERE TO HELP

Still have questions? Use the links below to ﬁnd

additional resources or reach out to our sta directly.

Self-Help: bit.ly/512-1422wh_support

Online Support: bit.ly/contact_techsupport

Phone: 608-782-1610

Our friendly support team based in La Crosse, WI is

available Mon-Fri, 9am-6pm CST.

WARRANTY & PATENTS

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on

this product relating to manufacturing defects in materials & workmanship.

La Crosse Technology, Ltd,

2830 S. 26th St.

La Crosse, WI 54601

For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty

Patents: www.lacrossetechnology.com/pages/patent

Ask questions, watch setup videos, and provide feedback on our social

media outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook

and Instagram.

STAY IN TOUCH!

Atomic Clock (512-1422WH)

Temperature Range:

32°F to 122°F (0°C to 50°C)

Power Requirements:

2-AA, IEC, LR6 batteries (not included)

Dimensions: 11” L x 1.1” W x 8.54” H

(27.9 cm L x 2.8 cm W x 21.7 cm H)

Outdoor Sensor (TX141v3)

Temperature Range:

-40°F to 140°F (-40°C to 60°C)

Transmission Range:

Over 330 ft. open air

(100 meters) RF 433MHz

Update Interval:

About every 51 seconds

Power:

2-AA, IEC, LR6 batteries (not included)

Battery Life:

Over 12 months

Dimensions:

1.57” L x 0.79” W x 5.12” H

(4.0cm L x 2.0cm W x 13.0 H cm)

Designed in La Crosse, Wisconsin •Made in China •Printed in China •DC 071222

SPECIFICATIONS CARE AND MAINTENANCE

When batteries of dierent brand or type are used

together, or new and old batteries are used together,

some batteries may be over-discharged due to a

dierence of voltage or capacity. This can result

in venting, leakage, and rupture and may cause

personal injury.

•Do not mix Alkaline, Lithium, standard, or

rechargeable battteries.

•Always purchase the correct size and grade of

battery most suitable for the intended use.

•Always replace the whole set of batteries at one

time, taking care not to mix old and new ones, or

batteries of dierent types.

•Clean the battery contacts and also those of the

device prior to battery installation.

•Ensure the batteries are installed correctly with

regard to polarity (+ and -).

•Remove batteries from product during periods of

non-use. Battery leakage can cause corrosion and

damage to this product.

•Remove used batteries promptly.

•For recycling and disposal of batteries, and

to protect the environment, please check the

internet or your local phone directory for local

recycling centers and/or follow local government

regulations.

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment o and on, the user is encouraged to try

to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

Connect the equipment into an outlet on a

circuit dierent from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV

technician for help.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and

(2) This device must accept any interference

received, including interference that may cause

undesired operation.

Caution!

Any changes or modiﬁcations not expressly

approved by the party responsible for compliance

could void the user’s authority to operate the

equipment.

FCC STATEMENT CALIFORNIA RESIDENTS

This product can expose you to chemicals

including acrylonitrile, butadiene, and styrene,

which are known to the State of California

to cause cancer and birth defects or other

reproductive harm. For more information, go

to: www.P65Warnings.ca.gov

CA WARNING:

be reproduced in any form, even in part, or

duplicated or processed using electronic,

mechanical or chemical process without the

written permission of the publisher.

This booklet may contain errors or misprints.

The information it contains is regularly

checked and corrections are included

in subsequent editions. We disclaim any

responsibility for any technical error or printing

error, or their consequences.

All trademarks and patents are recognized.

Indice

Altri manuali La Crosse Technology Orologio

La Crosse Technology

La Crosse Technology 404-1946 Dimensioni

La Crosse Technology

La Crosse Technology 433-3256W Manuale utente

La Crosse Technology

La Crosse Technology 519-1416 Dimensioni

La Crosse Technology

La Crosse Technology WS-7098U Manuale utente

La Crosse Technology

La Crosse Technology 513-1419BL-WA Manuale utente

La Crosse Technology

La Crosse Technology WT-3181PL 1 Series Manuale utente

La Crosse Technology

La Crosse Technology 513-1429BL Dimensioni

La Crosse Technology

La Crosse Technology 513-1417v4 Manuale utente

La Crosse Technology

La Crosse Technology 513-1417v4 Dimensioni

La Crosse Technology

La Crosse Technology WT-3161BK Manuale utente

La Crosse Technology

La Crosse Technology WS-8418U-IT Manuale utente

La Crosse Technology

La Crosse Technology WT-8005U Manuale utente

La Crosse Technology

La Crosse Technology WS-8157U-IT Manuale utente

La Crosse Technology

La Crosse Technology 513-1918S Guida all'installazione

La Crosse Technology

La Crosse Technology 404-50447 Manuale utente

La Crosse Technology

La Crosse Technology WS-8007CTWC Manuale utente

La Crosse Technology

La Crosse Technology WS-8120U Manuale utente

La Crosse Technology

La Crosse Technology WT-3132LCD Manuale utente

La Crosse Technology

La Crosse Technology WT-3102 Manuale utente

La Crosse Technology

La Crosse Technology BBB87276 Manuale utente

La Crosse Technology

La Crosse Technology 513-148 Manuale utente

La Crosse Technology

La Crosse Technology WS-8007U-C Manuale utente

La Crosse Technology

La Crosse Technology 513-1429TH Dimensioni

La Crosse Technology

La Crosse Technology WS-8001U Manuale utente

Manuali Orologio popolari di altre marche

Silicon Laboratories

Silicon Laboratories SI5324 Manuale utente

Heathkit

Heathkit GC-1005 Manuale utente

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuale utente

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuale utente

ALGE-Timing

ALGE-Timing ASC3 Manuale utente

Bodet

Bodet Profil 960 Manuale utente

Nixie Clock

Nixie Clock Divergence Meter Manuale utente

Mini Gadgets

Mini Gadgets MCPro Manuale utente

Casio

Casio TMR-200 Manuale utente

Progetti

Progetti ILTEMPOSTRINGE Manuale

BVItech

BVItech BV-101 Manuale utente

Progetti

Progetti KALIMERO Manuale

Sharp

Sharp SPC900 Manuale utente

Datexx

Datexx DF0063 Manuale utente

LG LEC-005 Manuale utente

IKEA

IKEA ROTBLÖTA Manuale utente

U-Line

U-Line Н-2811 Manuale utente

Digiview

Digiview RC305EL Manuale utente