Lab-T B2M Manuale utente

User Manual

B2M Manual

Power On/Off

Button for 1 sec

Bluetooth Intercom Pairing

1. Turn on the B2M(Factory default) or Button for 8 sec

2. When B2M and headset are in pairing mode, they are connected automatically.

Bluetooth Intercom Start/End

Tap the Button

Mesh Intercom Start/End

1. When you start the Bluetooth intercom, the mesh intercom starts automatically.

2. When the Bluetooth intercom is stopped, the mesh intercom is automatically stopped.

Creating the Mesh

1. [Creator] Press and Hold the button for 5 seconds to create a mesh.

2. [Participant] If you receive a mesh invitation message, tap the button to join the mesh.

If you receive a mesh invitation message, tap the button 2 times to reject the mesh.

Searching the Mesh

1. [Creator] Press and Hold the button for 5 seconds to find the existing mesh.

2. [Participant] If you receive a mesh join message, tap the button 2 times to accept the participant.

Switch Mesh mode

Press and Hold the button for 3 seconds to switch the mode.

(Public mode <-> private mode, public mode <-> guest mode)

Troubleshooting

Factory Reset

To restore the Savage to factory default settings

1. Press and hold the Button for 11 seconds

2. The B2M will be restored to factory setting and switched off automatically.

FCC,ICWarningstatement



CertificationandSafetyApprovals

FCCComplianceStatement

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to

part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment on and off, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antennae

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCCRFExposureStatement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End

users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used

for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in

accordance with FCC multi-transmitter product procedures.

The antenna used in this transmitter must be installed such that a minimum separation distance of 59.00 mm

is always maintained from the human head. We, Sena Technologies, Inc. confirm that when equipped in

authorized helmet models, the distance between antenna and one’s head will not be less than 59.00 mm.

FCCCaution

Any changes or modifications to the equipment not expressly approved by the party responsible for

compliance could void user’s authority to operate the equipment.



IndustryCanadaStatement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the

following two condition:

(1) This device may not cause harmful interference

(2) This device must accept any interference received, including interference that may cause undesired

operation.

ICDeclarationofConformity(IndustryCanada)

This device complies with Industry Canada RSS

applicable to unlicensed radio equipment. Operation is permitted under both of the following conditions:

(1) This device may not cause interference.

(2) This device must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment causes harmful interference with radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to attempt to correct the

interference by applying one or more of the measures. following:

• Reorient or move receiving antennas

• Increase the distance between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.



DéclarationdeconformitéIC(IndustrieCanada)

Le présent appareil est conforme aux CNR d'Industrie Canada

applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes

(1) Cet appareil ne doit pas créer d'interférences.

(2) Cet appareil doit accepter toutes les interférences reçues, y compris celles qui pourraient entraver son

bon fonctionnement.

Cet équipement a été testé et déclaré conforme aux limites imposées aux appareils numériques de classe B

conformément à la section 15 des règles de la FCC. Ces limites sont conçues pour fournir une protection

raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère,

utilise et peut émettre de l'énergie de fréquence radio. S'il n'est pas installé et utilisé conformément aux

instructions, il peut causer des interférences nuisibles aux communications radio. Cependant, rien ne garantit

que des interférences ne se produiront pas dans une installation particulière. Si cet équipement provoque des

interférences nuisibles avec la réception de radio ou de télévision, ce qui peut être déterminé en allumant et

en éteignant les équipements, l'utilisateur est invité à tenter de corriger l'interférence en appliquant l'une ou

plusieurs des mesures suivantes:

• Réorienter ou déplacer les antennes de réception

• Augmenter la distance entre l'équipement et le récepteur

• Branchez l’équipement sur une prise d’un circuit différent de celui auquel le récepteur est connecté.

• Consultez le revendeur ou un technicien expérimenté en radio / télévision pour obtenir de l'aide.

ÉnoncéFCCsurl’expositionauxradiationsRF:

Cet équipement est conforme aux réglementations FCC d’exposition aux radiations définies pour un

environnement non contrôlé. Les utilisateurs suivront les instructions d’exploitation spécifiques pour

répondre aux exigences de conformité sur l’exposition aux RF. L’antenne utilisée pour cet appareil ne doit pas

fonctionner en même temps qu’une autre antenne ou émetteur, sauf s'il y a conformité avec les procédures

FCC des produits multi-émetteurs.

L'antenne utilisée dans cet émetteur doit être installée de manière à respecter une distance minimale de

59,00 mm par rapport à la tête humaine. Nous, Sena Technologies, Inc., confirmons qu’avec les modèles de

casques autorisés, la distance entre l’antenne et la tête ne sera pas inférieure à 59.00 mm.

IC Attention

Toute modification apportée à l'équipement non expressément approuvée par la partie responsable de la conformité

pourrait annuler l'autorité de l'utilisateur à utiliser l'é

Manufacturer

Sena Technologies,Inc.

Address

19, Heolleung-ro 569-gil, Gangnam-gu, Seoul, South Korea

Indice

Lingue:

Altri manuali Lab-T Accessori per automobili

Lab-T

Lab-T Grand i10 Manuale utente

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente