LaCie d2 Network 2 Manuale utente
Quick Install Guide
d2 Network 2
DESIGN BY NEIL POULTON
Gigabit Ethernet
Protect your investment – register for free technical support: www.lacie.com/register
Box Content
LaCie d2 Network 2
Ethernet cable
Hi-Speed USB 2.0 Cable
Power supply kit
LaCie Utilities CD-ROM
Vertical stand kit
Front View
1. Status LED
Rear View
2. ON/OFF
3. eSATA Expansion
4. Gigabit Ethernet
5. USB 2.0 Direct Connection
6. USB 2.0 Expansion
7. Power Connector
8. Kensington Lock Slot
1
2
8
5
6
4
7
3
ON OFF
DESIGNED BY NEIL POULTON
eSATA LAN B USB A
ON OFF
DESIGNED BY NEIL POULTON
eSATA LAN B USB A
Step 1: Connection
A. Connect the power supply.
B. Connect the Ethernet cable to the d2 Network 2
and to your network through an Ethernet outlet
or directly to a router, switch or hub.
C. Turn on the d2 Network 2 by moving the power
switch on the back to the ON position.
NOTE: Please allow approximately 3 minutes for the
d2 Network 2 to start up and become available on the
network (the front LED will stop blinking).
Step 2: Access Dashboard
A. Install LaCie Network Assistant on your computer from the LaCie Utilities
CD-ROM. Then:
Windows users: Right-click the Network Assistant icon in the system tray.
Mac users: Click the LaCieNetwork Assistant icon in the menu bar.
Linux users: Right-click the LaCie Network Assistant icon in the task bar.
A
B
C
B. Select Configuration Window
from the menu.
If more than one LaCie server
appears in the left-hand column,
select LaCie-d2.
C. Make sure the Network tab is
selected, then click the LaCie-d2
hyperlink. The Dashboard
(administration page) will open
in your default web browser.
D. The first time you log into
the Dashboard, the Setup
Wizard will load in your
browser. The Setup Wizard
consists of three parts:
• General Settings: Modify the Machine Name (optional) and create the
admin account password.
• Time Configuration: Select whether the time and date should be set
manually or synchronized with a third party server.
• Disk Configuration: Specify how much of the total storage should be
made available when the drive is connected to your computer via USB,
and how much for when your computer is connected to the network. You
can modify this amount from 0 GB to up to 500GB (default is 0 GB).
If you choose to increase the USBShare size, it is necessary to format the
share. After completing the Setup Wizard, navigate to Drive Information >
USB Drive and select Format. Refer to the User Manual for more information.
IMPORTANT INFO: LaCie strongly recommends you do not increase the USBShare size to
more than 128 GB unless you format USBShare to either NTFS or HFS+ file system using
your operating system’s native disk utility.
E. Once you’ve finished, you can proceed to the Dashboard by clicking Finish.
NOTE: You can also change the language on the Setup Wizard page.
NOTE: The machine name can be modified later from the Dashboard.
NOTE: If necessary, you can assign the drive a static IP address from the Network section
in the Dashboard.
F. Your d2 Network 2 is configured and ready to use.
Step 3: Access Share
A. Click the LaCie Network Assistant icon in the
system tray (Windows), menu bar (Mac), or
task bar (Linux).
B. Under the machine name LaCie-d2, click
on Public.
C. Public will open in your operating system’s file browser. Transfer files to the
volume normally.
NOTE: For information on USB connection, refer to the User Manual located on the
Utilities CD-ROM.
Precautions
Do not stack more than 3 LaCie d2 Network 2 together. Do not expose the drive to
temperatures over 35° C (95° F) or 30° C (86° F) when stacked. Do not expose the device
to liquids. Use only the power supply shipped with the device.
Warranty Information
LaCie warrants your product against any defect in material and workmanship, under
normal use, for the designated warranty period. The warranty becomes effective from the
date of shipment. In the event this product is found to be defective within the warranty
period, LaCie will, at its discretion, repair or replace the defective product.
This warranty is void if:
• Theproductwasoperated/storedinabnormaluseormaintenanceconditions;
• Theproductisrepaired,modiedoraltered,unlessLaCieexpresslyauthorizessuch
repair,modicationoralterationinwriting;
• Theproductwassubjectedtoabuse,neglect,electricalfault,improperpackaging,
accidentoractsofnature;
• Theproductwasinstalledimproperly;
• Theserialnumberoftheproductisdefacedormissing;
• Thebrokenpartisareplacementpartsuchasapickuptray,etc.
• Thetampersealonthecasingisbroken.
See the User Manual (located on the Utilities CD-ROM) for more information.
FR
Étape 1 : Connexion
A. Branchez le cordon d’alimentation.
B. Branchez le câble Ethernet au d2 Network 2 et à une prise Ethernet du réseau ou directement à
un routeur, commutateur ou concentrateur.
C. Mettez le lecteur d2 Network 2 sous tension en plaçant l’interrupteur situé au dos en position ON
(MARCHE).
REMARQUE : comptez environ 3 minutes avant que le d2 Network 2 ne démarre et ne devienne
disponible sur le réseau (la DEL sur le devant de l’appareil cessera de clignoter).
Étape 2 : Accès au tableau de bord
A. Installez LaCie Network Assistant sur votre ordinateur. Vous trouverez le programme sur le
CD-ROM d’utilitaires LaCie. Procédez ensuite aux étapes suivantes :
Utilisateurs Windows : cliquez sur l’icône Network Assistant dans la barre d’état système à
l’aide du bouton droit de la souris.
Utilisateurs Mac : cliquez sur l’icône LaCie Network Assistant dans la barre de menus.
Utilisateurs Linux : cliquez sur l’icône LaCie Network Assistant dans la barre des tâches à l’aide
du bouton droit de la souris.
B. Dans le menu, sélectionnez la fenêtre de configuration.
Sélectionnez LaCie-d2 si plus d’un serveur LaCie apparaît dans la colonne de gauche.
C. Vérifiez que l’onglet Network (réseau) est sélectionné et cliquez sur le lien LaCie-d2. tableau de
bord (page d’administration) s’ouvre dans votre navigateur web par défaut.
Procédure d’installation
Altri manuali per d2 Network 2
3
Indice
Lingue:
Altri manuali LaCie Hardware di rete
LaCie
LaCie 5big - Network NAS Server Manuale utente
LaCie
LaCie CloudBox Manuale utente
LaCie
LaCie LaCinema Mini HD Bridge Manuale utente
LaCie
LaCie Internet Space 2 Manuale utente
LaCie
LaCie d2 Network 2 Manuale utente
LaCie
LaCie Network Space MAX Manuale utente
LaCie
LaCie 5big Office Manuale utente
LaCie
LaCie d2 Network 2 Manuale utente
LaCie
LaCie LaCie Ethernet Disk Manuale utente
LaCie
LaCie 5big Network 2 Manuale utente
LaCie
LaCie D2 BLU-RAY XL Manuale utente
LaCie
LaCie LaCie Ethernet Disk Manuale utente
LaCie
LaCie Network Space MAX Manuale utente
LaCie
LaCie Network Space MAX Manuale utente
LaCie
LaCie 5big Network 2 Manuale utente
LaCie
LaCie 4big Rack Office Manuale utente
LaCie
LaCie LaCie Ethernet Disk Manuale utente
LaCie
LaCie Network Space MAX Manuale utente
LaCie
LaCie 2big Quadra USB 3.0 Manuale utente
LaCie
LaCie 5big Network 2 Manuale utente
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
