laerdal SimPad SkillReporter Manuale utente
SimPad SkillReporter
www.laerdal.com
User Guide
2
Introduction
1
INTRODUCTION
SimPad is a wireless touchscreen device for use with Laerdal manikins.This version
is installed with SkillReporter software for Basic Life Support (BLS) training.To get
feedback on the CPR performance, use QCPR enabled manikins, either Resusci Anne
or Resusci Baby. SkillReporter has two modes, BLS Learner and BLS Instructor.
BLS Instructor
enables the instructor
to provide AED training.
Feedback can be displayed
from up to 6 manikins.
Adjust brightness, clock,
and more.
BLS Learner gives
feedback on CPR done
on a single manikin.
SkillReporter
2 3
Introduction 1
CONTENT
1 Introduction 2
Content 3
What’s in the box 4
2 Get Started 5
Charge the battery 5
Startup 5
3 Connect 6
Connectors 6
Connecting manikins 6
Connect to one manikin using USB cable 7
Connect using WiFi 7
Select manikins 8
Set up and select network 9
Laerdal Router 9
Edit manikin name 10
Can’t find a manikin? 10
4 SimPad SkillReporter 11
How to use SimPad SkillReporter 11
BLS Learner 12
BLS Instructor 13
Choose algorithm 14
Manage Learners 15
Event registration 17
Defibrillator features 18
Live feedback 20
Timeline 21
Results 22
BLS Settings 25
Get manikin information 26
5 Manikin Error State 27
Red light on Resusci Anne Manikin 27
4
Introduction
1
WHAT’S IN THE BOX
SimPad
Important Product Information
SimPad
SimPad to Manikin Cable
SimPad to PC Cable
SimPad Sleeve
Power Cable
Power Adaptor
User Guide for SkillReporter Important Product Information
5
Get Started 2
4
CHARGE THE BATTERY
Connect SimPad to the AC adapter and plug it into a wall outlet.
When the battery charges, the yellow LED flashes.
When the battery is fully charged, the yellow LED glows steadily.
If you start SimPad when the battery level is very low, the red LED flashes.
STARTUP
Press and hold down the Power button for half a second to switch on the SimPad.The
first startup can take a few minutes. You are prompted to set the time, date, language,
and device name.
6
Connect
3
CONNECTORS
USB port for
connection to
manikin or PC
Ethernet LAN
connection
Power adaptor
connection
CONNECTING MANIKINS
There are several ways to connect SimPad to the manikins.When connecting SimPad
to only one manikin, use either the USB cable or WiFi. No router is needed.
When connecting SimPad to more than one manikin (up to 6), use a WiFi connection
with a router. We recommend using the Laerdal Router as it simplifies the setup and
improves stability.
6 7
Connect 3
CONNECT TO ONE MANIKIN USING USB CABLE
The USB cable provides the most reliable connection when connecting SimPad to
one manikin.When using the USB cable, the manikin is powered by SimPad.To avoid a
quick battery discharge when the manikin is powered by SimPad, we recommend you
plug in the power adaptor.
CONNECT USING WIFI
For wireless use, make sure the manikin is in WiFi
mode, indicated by the green WiFi symbol on the
manikin’s control panel.The toggle button toggles
between cable,WiFi, and Bluetooth mode.
Toggle button
8
Connect
3
SELECT MANIKINS
If you start a session without having manikins connected, you are prompted to select
manikin(s). In BLS Learner you can only select one manikin.This happens automatically
if the manikin is connected through the USB cable, or if only one manikin is available.
In BLS Instructor you can choose up to 6 manikins.
Tap the manikin icon to
access this screen
Selected
Connected
Occupied (in use by another
SimPad)
Lost Connection
8 9
Connect 3
SET UP AND SELECT NETWORK
If you have selected more than one manikin (BLS Instructor), you are prompted to
choose a network.The network enables communication between several manikins and
SimPad.We recommend that you use the Laerdal Router (purchased separately) to
establish the network.
LAERDAL ROUTER
Let the router start up completely (approx. 2 minutes) before starting up SimPad and
the manikins. Also make sure the router switch is set to Router or AP, not Client. For
optimal performance, place the router above floor level. Do not reset or otherwise
change the router (i.e. password, configuration etc).To reboot, simply disconnect and
reconnect the power.To power the router, use only the included USB power supply
(5V). Using the SimPad power supply (12V) may cause permanent damage to the
router. A network from a Laerdal Router is listed as LaerdalNetMobile.
Router switch
Reset button (do not use)Power connector
10
Connect
3
EDIT MANIKIN NAME
The default manikin name is Resusci Anne or Resusci Baby. To keep track of multiple
manikins, give each one a unique name.
TIP: Switch on one manikin at the time and tap Edit name when the manikin appears
on the screen.Type a new name and put a corresponding name tag on the manikin.
Repeat this process for every new manikin.
Edit name
CAN’T FIND A MANIKIN?
If the manikin you want to use doesn’t appear on the list, make sure the manikin is
switched on and in WiFi mode, indicated by the green WiFi symbol on the control
panel on the manikin. Be patient - it might take up to 15 seconds to identify the
manikin. If the manikin still doesn’t appear, it may be connected to a different network
than SimPad.To make it available for selection, press and hold the manikin’s toggle
button. After two seconds a beep confirms that the manikin is reset. About 15 seconds
later the manikin appears on the list.
Connection problems may occur in areas with e.g. high WiFi traffic.
The most reliable connection for single manikin use is the USB cable. A cable connect-
ed manikin appears in the manikin list as preselected and connected.
Tap here to access the
manikin selection and
available networks.
Number of manikins
connected
Indice
