Laguna Tools LT14 SEL Manuale utente

Laguna 14” Bandsaw

REV. 1

Safety Rules

As with all machinery there are, certain hazards involved with the operation and

use. Using it with caution and respect will considerably lessen the possibility of

personal injury. However, if normal safety precautions are overlooked or ignored,

personal injury to the operator may result. If you have any questions relative to

the installation and operation, do not use the equipment until you have contacted

your supplying distributor.

Read carefully before operating the

1. Keep working area clean, and be sure adequate lighting is available.

2. Do not wear loose clothing, gloves, bracelets, necklaces or ornaments.

Wear face, eye, ear, respiratory and body protection devices as indicated for

the operation or environment.

3. Be sure the power is disconnected from the machine before bandsaw is

serviced or an attachment is to be fitted or removed.

4. Never leave the machine with the power on.

5. Do not use a bent, dull, gummy or cracked cutting tool.

6. Be sure the keys and adjusting wrenches have been removed, and all nuts

and bolts are secured.

Warranty

All of the Units are constructed under the strictest quality controls during

production and have undergone a final check before shipping. The guarantee is

valid for a period of 12 months from date of purchase and will be rendered null and

void in the case of unauthorized intervention, tampering or misuse other than

instructions specified in this manual.

IMPORTANT: Once fault has been verified, inform the seller (Laguna Tools) of the

problem or defect. Depending on the problem, the seller will ship a replacement

part or authorize the necessary repairs.

REV. 1

LT14 SEL Bandsaw MBAND145400

Blade length 103” to 105”.

Resaw capacity 8 5/8”.

Heavy duty dynamically balanced cast iron wheels.

Wheel dia 14” x 1 ¼”.

Wheel bearings sealed.

Miter gage slot 3/8” x ¾”.

Upper wheel tension and tilt system in solid steel and cast iron.

Solid upper guide post adjustable to be parallel to blade.

Recommended blades ¼” to ¾”.

Cast table size 15” x 15” with 4” steel extension (Total table size 19” x

15”).

Distance from column to blade 13 ¼”.

Table tilt from -15to +45degrees with flip positive stop at 90degrees.

Double cast iron trunion.

Blade change from the side of the table.

Throat plate aluminum with 3 leveling screws.

Height from ground to table 44” with stand.

Height from base to table 24” without stand.

Base size 13 ½” x 24”.

Space age ceramic blade guide system both top and bottom.

Dust port at the side under the lower blade guide 3 1/8” dia.

Easy adjustable (for blade drift) rip Fence 16” long x 3” high and 1 5/8”.

1” solid steel fence rail.

Motor 1.5 HP 220V 1 Phase only.

Breaker size 15 amp.

Wire supplied 6’ long [No plug supplied].

If a longer wire is required use 12 swg.

Machine weight 230 lbs.

Options

Miter gauge MBB35.00.08.00 5lbs

Stand MBB35.00.09.00 25lbs

REV. 1

Above is one method of packaging. Methods may vary.

Packaging open.

REV. 1

Miter Gauge Optional

Parts that need to be assembled to the bandsaw.

Allen Keys supplied.

REV. 1

Stand assembly Operation 1

NOTE: the angles may face in or out depending on your preference. Do not

tighten the bolts until the complete stand is assembled.

Finished assembled stand.

REV. 1

Second view of the stand on the side.

Bolt the stand to the bottom of the bandsaw with the saw lying down. Tighten all

the bolts before moving the bandsaw to the upright position.

REV. 1

View of the bandsaw in the upright position.

Fit the electrical box to the spine of the bandsaw.

REV. 1

Fit the cable clip and motor cable

View of the electrical box from the front.

REV. 1

Remove the yellow guard, side blade guides and back blade guide. Remove

grease and re-assemble.

View with guard and grease removed

Indice

Altri manuali Laguna Tools Sega

Laguna Tools

Laguna Tools Dake Technics 350 CE Manuale utente

Laguna Tools

Laguna Tools Dake VDL-18 Manuale operativo e di manutenzione

Laguna Tools

Laguna Tools Dake SE-5X6 RCT Manuale operativo e di manutenzione

Laguna Tools

Laguna Tools Fusion F1 Manuale utente

Laguna Tools

Laguna Tools HW110LS-30 Manuale utente

Laguna Tools

Laguna Tools Fusion 1 Manuale utente

Laguna Tools

Laguna Tools DAKE SUPER CUT 315 Manuale utente

Laguna Tools

Laguna Tools 14BX Series Manuale utente

Laguna Tools

Laguna Tools MBAND18BX2203 Manuale utente

Laguna Tools

Laguna Tools MCO8000-0250 Manuale utente

Laguna Tools

Laguna Tools Timbermaster Manuale utente

Laguna Tools

Laguna Tools Fusion 2 Manuale utente

Laguna Tools

Laguna Tools DAKE Euromatic 370S Manuale operativo e di manutenzione

Laguna Tools

Laguna Tools Fusion F1 Manuale utente

Laguna Tools

Laguna Tools Fusion 3 Manuale utente

Laguna Tools

Laguna Tools MPSP12-4-0135 Manuale utente

Laguna Tools

Laguna Tools MTST5S-0135 Manuale utente

Laguna Tools

Laguna Tools MPSP12-5-0135 Manuale utente

Laguna Tools

Laguna Tools Platinum Series Manuale utente

Laguna Tools

Laguna Tools 16HD Classic Manuale utente

Laguna Tools

Laguna Tools Dake VDL-18 Guida utente

Laguna Tools

Laguna Tools DAKE SE-810 Manuale operativo e di manutenzione

Laguna Tools

Laguna Tools DAKE SE-1018 Manuale operativo e di manutenzione

Laguna Tools

Laguna Tools 18CX Manuale utente

Manuali Sega popolari di altre marche

RIDGID

RIDGID BS1400 Manuale utente

ATIKA

ATIKA BWS 400-2 Manuale utente

RGC

RGC FS20 Manuale utente

Makita

Makita M2300 Manuale utente

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuale utente

IMET Spa

IMET Spa SIRIO 370 AF-E Manuale utente

Optimum

Optimum OPTisaw CS 275 Manuale utente

Makita

Makita BPB180 Manuale utente

Stihl

Stihl MS 462 C-M Manuale utente

AEG

AEG TS 250 K Manuale utente

Meec tools

Meec tools 004665 Manuale utente

Makita

Makita LS1018L Manuale utente

Ryobi

Ryobi RCS1400 Manuale utente

DeWalt

DeWalt DCS391 Manuale utente

Sealey

Sealey SA72 Manuale utente

skilsaw

skilsaw SPT88 Istruzioni per il montaggio

Urrea

Urrea SI810 Dimensioni e guida di installazione

EINHELL

EINHELL BKG 210/1 Manuale utente