Lake Shore FF407 Manuale utente
Storage Tray
Mobile Organizer
Assembling your new organizer is simple—just follow the directions in
this guide! We’ve provided all the tools you’ll need. Before you begin,
check the contents below to make sure you can identify the pieces.
What’s Included Hardware
©2009 Lakeshore
(800) 428-4414 FF407
www.lakeshorelearning.com Printed in China
side frames (2)
bolts (8)
spacers (8)
Allen wrench
locking
casters (2)
caster wrench
rods (4)
shelf
drawers (8)
free-rolling
casters (2)
1. Use bolts and spacers to
attach the rods between
the side frames as shown.
• Make sure the drawer
channels on the frames
face in.
• Place spacers between
the rods and the side
frames as shown.
• Tighten each bolt with
the Allen wrench.
2. Snap the shelf onto the
two rods on top.
3. Lay the organizer on its side. Slide the
casters into the ends of the legs. (Attach
the locking casters in diagonally opposite
corners. Attach the free-rolling casters in
the remaining corners.) Use the caster
wrench to tighten the nuts on the casters.
4. Set the organizer upright and
slide the drawers into the
channels. Move the organizer
into place and push the levers
down to lock the casters.
That’s all there is to it!
drawer channels
spacer
Altri manuali Lake Shore Magazzinaggio
