Land FTI6 Manuale utente

LandInfrared

2525PearlBuckRoad

BristolPA19007,U.S.A.

Telephone: (215) 781 0700

Facsimile: (215) 781 0723

Email: [email protected]

LandInfrared

Dronfield S18 1DJ, England

Telephone: (01246) 417691

Facsimile: (01246) 410585

Email: [email protected]

URL: http://www.landinst.com

Installation

Guide

©LandInfrared,1999 PublicationNº:TI198074

Issue A 08/99

FTI 6

Industrial Thermal Imager

InstallationGuide

Safety Information

InstallationGuide

Safety Information

FTI 6FTI 6

FTI 6 complies with current European directives

relatingtoelectromagneticcompatibilityandsafety

(EMCdirective89/336/EEC;Lowvoltagedirective

73/23/EEC).

Land Infrared Quality Management

System is approved to BS EN ISO

9001:1994 for the design,

manufacture, repair and on-site

servicing of non contact infrared

temperature measuring equipment.

NAMAS calibration certificates are

available from our UKAS accredited

calibration laboratory Nº 0034.

Safety Information

Observeallsafetyprocedureswherefollowingsymbolsappear.Adetailedlist

of all current symbols and their descriptions is contained at the end of these

operating instructions

CAUTION : Refer to Operating Instructions

FTI 6FTI 6

FTI 6 complies with current European directives

relatingtoelectromagneticcompatibilityandsafety

(EMCdirective89/336/EEC;Lowvoltagedirective

73/23/EEC).

Land Infrared Quality Management

System is approved to BS EN ISO

9001:1994 for the design,

manufacture, repair and on-site

servicing of non contact infrared

temperature measuring equipment.

NAMAS calibration certificates are

available from our UKAS accredited

calibration laboratory Nº 0034.

Safety Information

Observeallsafetyprocedureswherefollowingsymbolsappear.Adetailedlist

of all current symbols and their descriptions is contained at the end of these

operating instructions

CAUTION : Refer to Operating Instructions

abcdefabcdefg abcdef

InstallationGuide

Safety Information

SAFETYINFORMATION

Symbol Publication Description

IEC 417, No. 5031 Direct current

IEC 417, No. 5032 Alternating current

IEC 417, No. 5033 Both direct and

alternating current

IEC 617-2, No. 02-02-06 Three-phasealternating

current

IEC 417, No. 5017 Earth (ground) terminal

IEC 417, No. 5019 Protective conductor

terminal

IEC 417, No. 5020 Frame or chassis

terminal

IEC 417, No. 5021 Equipotentiality

IEC 417, No. 5007 On (Supply)

IEC 417, No. 5008 Off (Supply)

IEC 417, No. 5172 Equipment protected

throughout by double

insulation or reinforced

insulation(equivalentto

Class II of IEC 536)

InstallationGuide

Safety Information

SAFETYINFORMATION(CONTINUED...)

Symbol Publication Description

ISO 3864, No. B.3.6 Caution, risk of electric

shock

ISO 3864, No. B.3.1 Caution

BS EN 100015 Observe precautions for

handling electrostatic

discharge sensitive

devices

BS EN 60825-1 Warning, laser radiation

Refer to the Operating

Instructions.

InstallationGuide

TechnicalSupport

TECHNICALSUPPORT

Technical support for your LAND Thermal Imaging System

canbeobtainedbyeithercontactingtheaddress/telephone

number on the cover of this Installation Guide, or by Email

to the following addresses:

[email protected]

(For queries regarding

LIPS

Software)

[email protected]

(For queries regarding

FTI 6

Thermal Imagers)

InstallationGuide

Contents

CONTENTS

PARTA -INTRODUCTION

PARTB -PRECAUTIONS

PARTC - SPECIFICATIONS

PARTD -CARE ANDSTORAGE

PART E - PREPARING THE FTI 6 FOR USE

PART F - SETTING UP THE FTI 6

APPENDIX

Installation Guide

Contents

Installation Guide

Contents

PART A - INTRODUCTION

Contents

A1 ABOUT THE FTI 6 2

PART A - INTRODUCTION

Contents

A1 ABOUT THE FTI 6 2

Installation Guide

Part A

Page 1

Installation Guide

Part A

Page 1

PART A - INTRODUCTION

This publication provides the necessary information for a Land

FTI 6

Thermal

Imager to be operated. These instructions cover installation, operation and

maintenance of the Thermal Imager and its accessories.

The equipment must be used, maintained and serviced by properly trained

personnel, capable of following the procedures given in these instructions.

It is important to check the equipment with which you have been supplied and

then read these instructions thoroughly before proceeding with operation.

PART A - INTRODUCTION

This publication provides the necessary information for a Land

FTI 6

Thermal

Imager to be operated. These instructions cover installation, operation and

maintenance of the Thermal Imager and its accessories.

The equipment must be used, maintained and serviced by properly trained

personnel, capable of following the procedures given in these instructions.

It is important to check the equipment with which you have been supplied and

then read these instructions thoroughly before proceeding with operation.

Installation Guide

Part A

Page 2

Installation Guide

Part A

Page 2

A1 ABOUT THE

FTI 6

The

FTI 6

Thermal Imager can be used for creating thermal images and

measuring temperature in a wide variety of applications. It is designed to be

used either as a peremanently installed instrument or a portable unit. A range

of accessories are available to provide power, control, mounting and

environemntal protection. The

FTI 6

can be controlled from an IBM compatible

PC running

LIPS

software, or as a self contained instrument controlled by a

remote control unit, with a TV monitor.

Fig. A1 LAND

FTI 6

Thermal Imager

The

FTI 6

Thermal Imager is supplied with the following components:

16MB Memory card

Video Cable

S-VHS Video Cable

FTI 6

Control options:

1. LIPS Software.

2. Remote control unit and RS232 cable.

NOTE

A 625 line (PAL) or 525 line (NSTC) TV monitor is required with

option‘2’. ItmustbecapablyofreceivingCompositevideo1Vpeak

to peak or SVHS 1V peak to peak chrominance and luminance

signal.

A1 ABOUT THE

FTI 6

The

FTI 6

Thermal Imager can be used for creating thermal images and

measuring temperature in a wide variety of applications. It is designed to be

used either as a peremanently installed instrument or a portable unit. A range

of accessories are available to provide power, control, mounting and

environemntal protection. The

FTI 6

can be controlled from an IBM compatible

PC running

LIPS

software, or as a self contained instrument controlled by a

remote control unit, with a TV monitor.

Fig. A1 LAND

FTI 6

Thermal Imager

The

FTI 6

Thermal Imager is supplied with the following components:

16MB Memory card

Video Cable

S-VHS Video Cable

FTI 6

Control options:

1. LIPS Software.

2. Remote control unit and RS232 cable.

NOTE

A 625 line (PAL) or 525 line (NSTC) TV monitor is required with

option‘2’. ItmustbecapablyofreceivingCompositevideo1Vpeak

to peak or SVHS 1V peak to peak chrominance and luminance

signal.

Installation Guide

Part A

Page 3

Installation Guide

Part A

Page 3

Power supply options:

1. 12V power supply unit and Power cable.

2. DIN Rail power supply unit and Power cable.

Multi Imager cables:

RS422 cable

RS485 cable

Audio option:

Headset

Optional Lenses:

2.5x Magnification Telescope focus

1 x Magnification Close-up

0.4x Magnification Wide-Angle

0.25x Magnification Wide-Angle

Environmental Protection & Mounting accessories:

Environmental Enclosure

Water cooled Plate

Air Purge & Fan

Mounting Brackets

Motorized Pan and Tilt Head

Power supply options:

1. 12V power supply unit and Power cable.

2. DIN Rail power supply unit and Power cable.

Multi Imager cables:

RS422 cable

RS485 cable

Audio option:

Headset

Optional Lenses:

2.5x Magnification Telescope focus

1 x Magnification Close-up

0.4x Magnification Wide-Angle

0.25x Magnification Wide-Angle

Environmental Protection & Mounting accessories:

Environmental Enclosure

Water cooled Plate

Air Purge & Fan

Mounting Brackets

Motorized Pan and Tilt Head

Indice

Altri manuali Land Telecamera termica

Land

Land Arc Manuale utente

Manuali Telecamera termica popolari di altre marche

Hikmicro

Hikmicro B20 Manuale utente

FLIR

FLIR E-EST Series Manuale utente

FLIR

FLIR M-Series Manuale utente

BST

BST BT-72 Manuale utente

FLIR

FLIR G300 pt Series Manuale utente

CBC

CBC EN7-S02T Manuale utente

Satir

Satir YRH600 Manuale utente

TESTO

TESTO 882 Manuale utente

TECPEL

TECPEL TIG-320 Manuale utente

SKF

SKF TKTI 21 Manuale utente

TESTO

TESTO 885 Manuale utente

InfiRay

InfiRay AT300 Series Manuale utente

InfiRay

InfiRay AT Series Manuale utente

FLIR

FLIR X6530sc Series Manuale utente

Videotec

Videotec MAXIMUS MVXT Manuale utente

Guide Sensmart

Guide Sensmart D384M Manuale utente

NBN

NBN FLIR A6 Series Manuale utente

WORKSWELL

WORKSWELL SAFETIS Manuale utente