Lanier 5622 AG Manuale



































your document management partner





Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get

maximum versatility from this machine all operators should carefully read and follow the instructions in

this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information before using this machine. It contains important information related

to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes:

Some illustrations may be slightly different from your machine.

Certain options may not be available in some countries. For details, please contact your local dealer.

Operator Safety:

This machine is considered a class 1 laser device, safe for office/EDP use. The machine contains two

GaAIAs laser diodes, 5-milliwatt, 760-800 nanometer wavelength for each emitter. Direct (or indirect

reflected ) eye contact with the laser beam might cause serious eye damage. Safety precautions and

interlock mechanisms have been designed to prevent any possible laser beam exposure to the opera-

tor.

Laser Safety:

The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit

in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite

equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser

chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis

and laser subsystems to the factory or service depot when replacement or the optical subsystem is re-

quired.

Warning:

Use of controls or adjustment or performance of procedures other than those specified in this manual

might result in hazardous radiation exposure.

Notes:

The model names of the machines do not appear in the following pages. Check the type of your ma-

chine before reading this manual. (For details, ⇒p.2 “Machine Types”.)

•Type1: 5622 AG

•Type2: 5627 AG

Certain types might not be available in some countries. For details, please contact your local dealer.

Two kinds of size notation are employed in this manual. With this machine refer to the inch version.

For good copy quality, Savin recommends that you use genuine toner.

Savin shall not be responsible for any damage or expense that might result from the use of parts other

than genuine parts in your office product.

Power Source

120V, 60Hz, 12A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see “Power Connection”in the “Copy Reference”manual.

RussianC2-EN-sysF1_V4_FM.book Page 1 Thursday, August 23, 2001 11:34 AM

Note to users in the United States of America

Notice:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-

ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television re-

ception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio /TV technician for help.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

1. Properly shielded and grounded cables and connectors must be used for connections to host com-

puter (and/or peripheral) in order to meet FCC emission limits.

2. AC adapter with ferrite core must be used for RF interference suppression.

Note to users in Canada

Note:

This Class B digital apparatus complies with Canadian ICES-003.

Remarque concernant les utilisateurs au Canada

Avertissement:

Cet appareil numérique de la classe B est conforme àla norme NMB-003 du Canada.

In accordance with IEC 60417, this machine uses the following symbols for the main power switch:

ameans POWER ON.

cmeans STAND BY.

RussianC2-EN-sysF1_V4_FM.book Page 1 Thursday, August 23, 2001 11:34 AM

Copyrights and Trademarks

Trademarks

Ethernet®is a registered trademark of Xerox Corporation.

PostScript®and Acrobat®are registered trademarks of Adobe Systems Incorpo-

rated.

Apple Talk, Apple, Macintosh are registered trademarks of Apple Computer, In-

corporated.

Novell, and Netware are registered trademarks of Novell, Inc.

Information about Installed Software

expat

• The software installed on this product includes the expat application soft-

ware Version 1.1 (hereinafter "expat 1.1").

• The product manufacturer has not made any modification to the source code

of the expat 1.1.

• The product manufacturer provides warranty and support to the software of

the product including the expat 1.1 and the product manufacturer makes Mr.

James Clark, the initial developer of the expat 1.1, free from these obligations.

• The expat 1.1 is made available under Mozilla Public License Version 1.1

(hereinafter "MPL 1.1"), and controller software of the product equals the

Larger Work as defined in MPL 1.1. The software of this product except the

expat 1.1 is licensed to the product manufacturer under separate agree-

ment(s).

• The source code of the expat 1.1 is available at:

ftp://ftp.jclark.com/pub/xml/expat1_1.zip

• MPL 1.1 is also available at:

http://www.mozilla.org/MPL/MPL-1.1.html

• Information relating to the expat 1.1 is available at:

http://www.jclark.com/xml/expat.html

RussianC2-EN-sysF1_V4_FM.book Page i Thursday, August 23, 2001 11:34 AM

NetBSD

For all users to use this product:

This product contains NetBSD operating system:

For the most part, the software constituting the NetBSD operating system is not

in the public domain; its authors retain their copyright.

The following text shows the copyright notice used for many of the NetBSD

source code. For exact copyright notice applicable for each of the files/binaries,

the source code tree must be consulted.

A full source code can be found at http://www.netbsd.org/.

Redistribution and use in source and binary forms, with or without modifica-

tion, are permitted provided that the following conditions are met:

ARedistributions of source code must retain the above copyright notice, this list

of conditions and the following disclaimer.

BRedistributions in binary form must reproduce the above copyright notice,

this list of conditions and the following disclaimer in the documentation

and/or other materials provided with the distribution.

CAll advertising materials mentioning features or use of this software must

display the following acknowledgement:

This product includes software developed by the NetBSD Foundation, Inc.

and its contributors.

DNeither the name of The NetBSD Foundation nor the names of its contribu-

tors may be used to endorse or promote products derived from this software

without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND

CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DIS-

CLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS

BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEM-

PLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMIT-

ED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CON-

TRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTH-

ERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

RussianC2-EN-sysF1_V4_FM.book Page ii Thursday, August 23, 2001 11:34 AM

iii

Authors Name List

All product names mentioned herein are trademarks of their respective owners.

The following notices are required to satisfy the license terms of the software

that we have mentioned in this document:

•This product includes software developed by the University of California,

Berkeley and its contributors.

•This product includes software developed by Jonathan R. Stone for the NetB-

SD Project.

•This product includes software developed by the NetBSD Foundation, Inc.

and its contributors.

•This product includes software developed by Manuel Bouyer.

•This product includes software developed by Charles Hannum.

•This product includes software developed by Charles M. Hannum.

•This product includes software developed by Christopher G. Demetriou.

•This product includes software developed by TooLs GmbH.

•This product includes software developed by Terrence R. Lambert.

•This product includes software developed by Adam Glass and Charles Han-

num.

•This product includes software developed by Theo de Raadt.

•This product includes software developed by Jonathan Stone and Jason R.

Thorpe for the NetBSD Project.

•This product includes software developed by the University of California,

Lawrence Berkeley Laboratory and its contributors.

•This product includes software developed by Christos Zoulas.

•This product includes software developed by Christopher G. Demetriou for

the NetBSD Project.

•This product includes software developed by Paul Kranenburg.

•This product includes software developed by Adam Glass.

•This product includes software developed by Jonathan Stone.

•This product includes software developed by Jonathan Stone for the NetBSD

Project.

•This product includes software developed by Winning Strategies, Inc.

•This product includes software developed by Frank van der Linden for the

NetBSD Project.

•This product includes software developed for the NetBSD Project by Frank

van der Linden

•This product includes software developed for the NetBSD Project by Jason R.

Thorpe.

•The software was developed by the University of California, Berkeley.

•This product includes software developed by Chris Provenzano, the Univer-

sity of California, Berkeley, and contributors.

RussianC2-EN-sysF1_V4_FM.book Page iii Thursday, August 23, 2001 11:34 AM

JPEG LIBRARY

•The software installed on this product is based in part on the work of the In-

dependent JPEG Group.

RussianC2-EN-sysF1_V4_FM.book Page iv Thursday, August 23, 2001 11:34 AM

ENERGY STAR Program

•Low-Power mode and Off mode or Sleep mode

This product automatically lowers its power consumption when it is not op-

erated for a fixed time (standard setting time: 1 minute). This is called“Off

mode”with a single function copying machine and “Sleep mode”with a mul-

tiple function machine equipped with optional facsimile and printing func-

tions.

Off mode: Equivalent to the condition when the operation switch is turned

off.

Sleep mode: Equivalent to the condition when the operation switch is turned

off. Receiving fax messages and printing from a computer are possible.

If you want to operate this product while it is in either of these modes, do one

of followings:

-Turn on the operation switch.

-Place an original in the document feeder (ADF) tray.

-Lift and lower the exposure glass cover or the document feeder (ADF).

The default interval before entering Off mode or Sleep mode can be adjusted.

To change it, see ⇒p.77 “Timer Setting”.

The ENERGY STAR Program establishes two modes which lower the power

consumption of the product when it is not operated for a fixed time. These

modes are the Low-Power mode and the Off mode or Sleep mode. This prod-

uct has only one mode, the Off mode or Sleep mode. This mode meets the re-

quirements of both the Low-Power mode and Off mode or Sleep mode. In this

manual, the Off mode is called the Auto Off mode.

As an ENERGY STAR Partner, we have determined

that this machine model meets the ENERGY STAR

Guidelines for energy efficiency.

The ENERGY STAR Guidelines intend to establish an international energy-saving system for

developing and introducing energy-efficient office equipment to deal with environmental is-

sues, such as global warming.

When a product meets the ENERGY STAR Guidelines for energy efficiency, the Partner shall

place the ENERGY STAR logo onto the machine model.

This product was designed to reduce the environmental impact associated with office equip-

ment by means of energy-saving features, such as Low-power mode.

RussianC2-EN-sysF1_V4_FM.book Page v Thursday, August 23, 2001 11:34 AM

•Duplex Priority

The ENERGY STAR Program recommends use of the Duplex function. By

conserving paper resources this function is less of a burden to the environ-

ment. For applicable machines, duplex function (one-sided originals→two-

sided copies) can be selected preferentially when the operation switch or the

main power switch is turned on, the{

{{

{Energy Saver}

}}

}key is pressed, or the ma-

chine resets itself automatically. To change the settings of the Duplex Priority

mode, see “Duplex Mode Priority”in the Copy Reference manual.

❖

❖❖

❖Specification

Recycled Paper

In accordance with the ENERGY STAR Program, we recommend use of recycled

paper which is environment friendly. Please contact your sales representative

for recommended paper.

Low- Power mode, Auto

Off Mode

Power consumption 7 W

Default interval 1 minute

Recovery time 10 seconds or less

Duplex Priority 1 Sided→2 Sided

RussianC2-EN-sysF1_V4_FM.book Page vi Thursday, August 23, 2001 11:34 AM

vii

How to Read this Manual

Symbols

In this manual, the following symbols are used:

WARNING:

This symbol indicates a potentially hazardous situation that might result in

death or serious injury when you misuse the machine without following the in-

structions under this symbol. Be sure to read the instructions, all of which are in-

cluded in the Safety Information section in the Copy Reference manual.

CAUTION:

This symbol indicates a potentially hazardous situation that might result in mi-

nor or moderate injury or property damage that does not involve personal injury

when you misuse the machine without following the instructions under this

symbol. Be sure to read the instructions, all of which are included in the Safety

Information section in the Copy Reference manual.

* The statements above are notes for your safety.

Important

If this instruction is not followed, paper might be misfeed, originals might be

damaged, or data might be lost. Be sure to read this.

Preparation

This symbol indicates the prior knowledge or preparations required before op-

erating.

Note

This symbol indicates precautions for operation or actions to take after misoper-

ation.

Limitation

This symbol indicates numerical limits, functions that cannot be used together,

or conditions in which a particular function cannot be used.

Reference

This symbol indicates a reference.

[]

Keys that appear on the machine's display panel.

{}

Keys built into the machine's control panel.

RussianC2-EN-sysF1_V4_FM.book Page vii Thursday, August 23, 2001 11:34 AM

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Lanier Stampante tutto in uno

Lanier

Lanier LP332c Manuale del proprietario

Lanier

Lanier LD130C Manuale utente

Lanier

Lanier SP C231SF Manuale utente

Lanier

Lanier MP C3002 Manuale utente

Lanier

Lanier MP 301SPF Manuale utente

Lanier

Lanier LD215cg Manuale utente

Lanier

Lanier Pro 907EX Manuale utente

Lanier

Lanier MP C4502 Manuale del proprietario

Lanier

Lanier LD225 Manuale di istruzioni e di sicurezza

Lanier

Lanier LD160c Manuale utente

Lanier

Lanier FAX1190L Manuale utente

Lanier

Lanier Pro C720 Manuale utente

Lanier

Lanier GELJET SG 3100SNw Manuale utente

Lanier

Lanier LD225 Istruzioni di installazione e manutenzione

Lanier

Lanier LD316 Manuale utente

Lanier

Lanier e2004 Manuale del proprietario

Lanier

Lanier LD1110 Manuale di servizio

Lanier

Lanier lp145n Istruzioni per l'installazione

Lanier

Lanier 5222 Manuale

Lanier

Lanier SP C222SF Manuale utente

Lanier

Lanier LD360 Manuale utente

Lanier

Lanier AP4510 Manuale utente

Lanier

Lanier LD325 Manuale utente

Lanier

Lanier MP 6002 Manuale del proprietario

Manuali Stampante tutto in uno popolari di altre marche

Triumph Adler

Triumph Adler DC 2016 Manuale

Epson

Epson WorkForce WF-2510 Guida utente

Epson

Epson Stylus Scan 2000 Manuale di installazione e funzionamento

Epson

Epson PictureMate Snap PM 240 Manuale di istruzioni

Konica Minolta

Konica Minolta bizhub C35 Manuale utente

Brother

Brother MFC-J430w Manuale utente

Konica Minolta

Konica Minolta BIZHUB 558 Manuale utente

Lexmark

Lexmark MX710 Series Manuale

Brother

Brother MFC-9760 Manuale utente

Lexmark

Lexmark XC8155 Manuale utente

Lexmark

Lexmark X642E Manuale utente

Sharp

Sharp MX-2310U Guida

Aficio

Aficio 200 Manuale utente

Canon

Canon ImageCLASS 2300 Manuale

Ricoh

Ricoh Pro C900 Manuale utente

Lexmark

Lexmark X925 Manuale utente

Brother

Brother Business Smart MFC-J4510dw Manuale utente

Epson

Epson Stylus CX8400 Series Manuale utente