Lanner electronics EM-566 Series Manuale utente

EM-566 Series

VIA Eden VE Low-Power CPU For

Network Security Appliance ,

4xLANs Embedded SBC

This document is copyrighted by the original manufacture. The original manufacturer

reserves the right to make modifications to the product(s) described in this manual at any

time without notice. This manual may not, in whole or in part, be photocopied,

reproduced, transcribed, translated, or transmitted in whatever form without the written

consent of the manufacturer, except for copies retained by the purchaser for backup

purposes. All rights are reserved.

TRADEMARKS

Pentiumis a registered trademark of Intel Corporation.

The following are trademarks or registered trademarks of their respective companies:

IBM, Intel, AMD, Cyrix, Award, AMI, S3, Microsoft, Windows, Windows NT, Novell, SCO,

PC/104, PICMG, ALI, UMC, SMC, Winbond. Products mentioned in this manual are for

identification purposes only. All names of products or services appearing in this manual

are the trademarks or registered trademarks of their respective organizations and

companies.

Ver. No. 1.0

LEI-UM-EM-566 Series

Date: 2003/01/08

TABLE OF CONTENTS

CHAPTER 1INTRODUCTION 1

1.1 SPECIFICATIONS 2

1.2 PACKING CHECK LIST 3

CHAPTER 2JUMPER SETTING AND CONNECTORS 4

2.1 BOARD OUTLINE OF EM-566 4

2.2 INSTALLING AND UPGRADING THE CPU 5

2.3 JUMPER SETTING OVERVIEW 7

2.4 JUMPER LOCATIONS FOR EM-566 8

2.5 JUMPER SETTINGS SUMMARY FOR EM-566 9

2.6 JUMPER SETTINGS FOR EM-566 10

2.7 I/O CONNECTOR LOCATIONS FOR EM-566 11

2.8 I/O CONNECTOR SUMMARY FOR EM-566 12

2.9I/O CONNECTORS DESCRIPTION 13

CHAPTER 3AWARD BIOS SETUP 22

3.1 RUNNING AWARD BIOS 22

3.2 CMOS SETUP UTILITY 23

3.3 STANDARD CMOS SETUP 25

3.4 Advanced CMOS Setup 27

3.5 Advanced Chipset Setup 31

3.6 Power Management Setup 33

3.7 Peripheral Setup 34

3.8 PCI Plug and Play Setup 36

3.9 Hardware Monitor Setup 39

3.10 CHANGE SUPERVISOR/USER PASSWORD 40

3.11 LOAD OPTIMAL DEFAULTS 42

3.12 SAVE & EXIT SETUP 43

3.13 EXIT WITHOUT SAVING 44

TABLE OF CONTENTS

CHAPTER 4DRIVERS SUPPORT 45

4.1 USE YOUR DRIVER CD-ROM 45

4.2FILE DIRECTORY 45

APPENDIX A TECHNICAL REFERENCE 46

GLOSSARY 48

TERMS AND CONDITIONS

RMA SERVICE REQUEST FORM

INTRODUCTION

~ 1~

CHAPTER 1.

INTRODUCTION

The EM-566 Series is a 5.25" single board computer combining an onboard new VIA

embedded low power VIA Eden ESP VE Low-Power processor and the highly-integrated

VIA Apollo PLE133/VT686B chipset, that provides the most flexible, compatible, and

cost-effective platform solution for building a wide range of desktop and set top boxes to

thin clients and web terminals powerful computing and multimedia performance for all the

most popular productivity and Internet applications.

To enhance network security appliance, the EM-566 Seriescomes with Realtek RTL8100

10/100 Mbps fast Ethernet controllers and four Ethernet LAN ports to provide an ideal

price/performance solution for high-end commercial and industrial applications where

stability and reliability are essential.

Designed with the Plug-and-Serve concept in mind, the EM-566 Series offers one 144 pin

SODIMM which provide full functionality and performance to be used "exactly" where you

need it as well. In addition, one ATA mode CompactFlash type II socket used in installing

OS avoiding service disruption caused by hard disk's mechanical/magnetic failures.

EM-566 Serieshas many expansion functionssuch as one PCI and one 124-pin Mini-PCI

slot , One 40-pin IDE connector that supportsup to two IDE devices and Ultra

ATA/100/66/33 interface help designers and integrators improve system performance by

retrieving and sending data faster. For easy access, EM-566 Series has a 9-pin, RS-232

serial port for local system management, maintenance, and diagnostics. Everything you

could need is on-board.

INTRODUCTION

~ 2~

1.1 SPECIFICATIONS

οProcessor :VIA Eden ESP VE series

οChipset :PLE133/VT686B, Realtek RTL8100

οPCIPart Module : A. Four Realtek RTL8100

B. One 124pin mini-PCI Slot

C. One Std PCI Slot

οSystem Memory/RAM :One 144 pin SODIMM

οIDE Drive Interface: A. One CompactFlash type II socket, support UltraDMA

mode

B. One 40-pin (2x20) UltraDMA-100 IDE connector

οBIOS :AMIlicensed BIOS

οI/O Connector :A. One DB-9 COM connector, One COM pin header

B. Four 10/100Mb RJ-45 connectors

C.Two USB1.1 port connector (Reserved)

D.One Power Jack (2.0mm)

οPin-header :A. One 6-pin PS/2 keyboard/mouse header

B. One Multi-mode parallel port header

C. On board mini software reset botton

D. One parallel port pin header (for control LCM use)

E. One 1*4 pin-header (for control Keypad use)

οRTC :Internal RTC with Li battery

οOperating Temperature :0 °C~60 °C

οStorage Temperature : -20 °C~70 °C

οHumidity :5 %~95%RH, non-condensing

οPower :2.5mm Power jack or On-board 20 pins ATX power

connector (AT Function Only)

οBoard Size (W xD) :203mm x 146mm

οVersion :EM-566A: VIA Eden 4000, Four RJ-45, One DB-9, Power

Jack, w/o LCM and Keypad control pin-header

INTRODUCTION

~ 3~

1.2 PACKING CHECK LIST

Inspect the product package for the following items before installation. If there is anything

missing,please contact our authorized reseller.

Item Qty Remark

EM-566A 1 pc EM-566A 5.25” Embedded SBC

JUMPER SETTING AND CONNECTORS

~ 4~

JUMPER SETTING AND CONNECTORS

The figure below shows the jumpers and connectors location on the EM-566 Series. The

PCB version may differ for slight changes without notice.

2.1 Board Outline of EM-566 Series

CHAPTER 2.

PSA1

LPTA1

PRJK1

COMB1

RSW1

IDEF1

FAN1

SDOC1

IDEB1

FAN2

LAN3

KPA1

LAN4

VGAB1

COMA1

LCMA1

LAN2

DIMMB1

LAN1

PKMB1

USBA1

110

1 2

15 16

1 2

11 12

1 9 20

PLRS1

CMOS1

JUMPER SETTING AND CONNECTORS

~ 5~

2.2 INSTALLING AND UPGRADING THE CPU

To upgrade to a higher power CPU, simply remove the old CPU and install a new one.

Make sure to set the jumpers for the new CPU type and speed.

WARNING!

Disconnect the power cord from your system when you intend to

work on it or when you plan to open the chassis of your industrial

computer. Do not make

connections when the power is turned on

because the sensitive electronic components could be damaged

by the sudden rush of power. Please only allow experienced

electronic technicians to do this job.

STATIC ELECTRICITY PRECAUTION!

Caution! Computer compo

nents are very sensitive to damage

from static electric discharge. Always ground yourself to remove

static charge build-

up before touching the boards in the computer.

Use a grounding wrist strap at all times. Place all electronic

components on anti-static pad for static-

dissipation or in

static-shielded bag when they are not in the chassis.

CAUTION!

Danger of explosion if battery is incorrectly replaced. Replace

only with the same or equivalent type recommended by the

manufacturer. Dispose of used ba

tteries according to the battery

manufacturer’s instructions or accepted environmental regulatory

standards.

JUMPER SETTINGS AND CONNECTORS

~ 6~

INSTALLINGTHE DIMM MODULE:

A DIMM module simply snaps into a socket on the system board. Pin1 of the DIMM

module must correspond with Pin1 of the socket.

1.Pull the “tabs” which are at the ends of the socket to the side.

2.Position the DIMM above the socket with the “notches” in the module aligned with the

“keys” on the socket.

3.Seat the module vertically into the socket. Make sure it is completely seated. The tabs

will hold the DIMM in place.

Pin1 Notch

Key

TabTab

Indice

Altri manuali Lanner electronics Hardware per computer

Lanner electronics

Lanner electronics IAC-F695 Series Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente