Lanpro LPT-Xfast Manuale utente
Cabling Management - Tools
www.lanpro.com
LPTXfast_M123_ENB01W
LPT-Xfast 4-Pair Termination Tool for X-Class Jacks made by LanPro,
123 Manual
LPT-Xfast 4-Pair Termination Tool for
X-Class Jacks made by LanPro, 123 Manual
The LPT-Xfast 4-Pair Termination Tool has been designed for the
termination of all the LanPro Series Keystone compatible Jacks.
This M123 document will guide you on its use for the preparation of
quality terminations.
www.lanpro.com
Cabling Management - Tools - LPT-Xfast 4-Pair Termination Tool for X-Class
Jacks made by LanPro, 123 Manual
Components of the LPT-Xfast tool
How to assemble the LPT-Xfast tool before use
Head with the Die
A
B
2
It is composed of two parts, the head including the die and the body.
1.- Insert the guide slot of the head with the Die into the tool body.
2.- Press the button at both sides while pushing the body on to the head with the Die until securely xed.
Tool body
Button Guide Slot
P
ress toward
www.lanpro.com
Cabling Management - Tools - LPT-Xfast 4-Pair Termination Tool for X-Class
Jacks made by LanPro, 123 Manual
Precautions
Termination
C
D
3
3.- Move forward the die and make sure it is completely xed.
Install the wires and place them
securely into the insulation
displacement terminals, following
the appropriate color code
(T568A or T568B).
Correct
Incorrect
AB
Please do not press the tool, when A, B sides
are touching and there’s no keystone
Jack inside the die.
LanPro is continuously improving its products and reserves the right to change specications and availability without prior notice.
Indice
