Larry vs Harry Canopy Manuale utente
Canopy
Assembly Manual
by Larry vs Harry
Before you start
Things you need, to attach your brandnew Canopy
Bullitt with Honeycomb Board
1
5 MM
Hex/Allen key
Grease
(metal on metal)
Important message from Larry the King.
3 4
Larry the King says:
You think you are pro like me?!
Real pros read the
f***ing manual!
2
13 MM
Wrench/Spanner
Grease. Remember to grease or else your mechanic
will hate you later on. (“Muc-o” has a Bio Grease
that cares about the environment)
Ouch! Be careful, you could hurt your fingers.
Icons that will appear throughout the guide:
Components
1. Canopy Tent
2. Sidebars
3. Top
Two tips before you start attaching the Canopy
Step 1
B
A
Raise the handlebar to the max.
height to make room for the Canopy.
A
Before attaching the Canopy
frame, remove the two bolts inside
the Canopy. Use tools 1+2.
Grease the two bolts.
Screw the two bolts through both
Canopy frame and Bullitt frame
in Step 2.
B
Larry the King says:
“If you have bought the
Bullitt Foldable Seat and want
to attach it inside the Canopy,
you remove the bolts and
attach the Seat to
the back holes instead”
Fitting the Canopy onto the Bullitt frame
A
C
B
Step 2
Unfold the Tent, remove all strips
and place it on the Bullitt. Backside
of the tent facing the handlebar.
Drag the tent backwards towards
the handlebar.
Attach the velcro on the bicycle
frame. Remember to screw the two
bolts from Step 1 through both
Canopy frame and Bullitt frame.
Steering this way
Fit the hook (A) onto the frame and
the pin (B) into the back hole on the
bottom of the frame.
C
1
34
2
B
A
Like this.
Assembling the Roof bars
Step 3
Indice
Altri manuali Larry vs Harry Accessori per biciclette
