Larson Electronics RT-100C-XEMG-10C Manuale utente
EPL-LED-150W-RT-XEMG-SP0009
Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com
1of 3
Replacement Remote Battery Backup Unit for EPL-LED-150W-
RT-100C-XEMG-10C Explosion Proof Flood Lights
Instruction Manual
Thank you for your purchase of the Larson Electronics EPL-LED-150W-RT-XEMG-SP0009.
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CRITICAL SAFETY INSTRUCTIONS:
•INSTALLATION SHOULD ONLY BECONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY
RELEVANT LOCAL BUILDING CODES.
•RISK OFFIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF FIXTURE'S ELECTRICAL
SYSTEMS. IFNOTQUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.
•BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE FIXTURE'S RATED VOLTAGE.
•TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP
OBJECTS. SUITABLE FOR DAMP LOCATIONS.
Never place spotlight face down when light is on. Doing so could burn/ignite surfaces such as seats, carpeting, etc. and
cause major property damage. Always turn spotlight off when not in use.
Avoid direct eye exposure the light source when light is on. DO NOT shine light into the face of someone else.
DO NOT touch lens of light when on or recently on. The lens/cooling fins will be hot after long periods.
DO NOT allow children to handle or operate this light.
DO NOT use this product for other than its intended use.
DO NOT operate in close proximity of combustible or flammable materials.
DO NOT attempt to operate this light if cord, plug, battery, lens or any part of the light is damaged or corroded.
WARNING
TO AVOIDTHE RISKOF FIRE,EXPLOSION OR ELECTRIC SHOCK, THIS PRODUCT SHOULD BE INSTALLED,
INSPECTEDAND MAINTAINEDBY A QUALIFIED ELECTRICIANONLY, IN ACCORDANCEWITHALL
APPLICABLEELECTRICAL CODES.
TO AVOIDELECTRIC SHOCK:
•BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•PRODUCT MUST BE CONNECTEDTOA WIRING SYSTEM WITHAN EQUIPMENT-GROUNDING
CONDUCTOR.
TO AVOIDEXPLOSION:
•MAKE SURE THE SUPPLY VOLTAGE IS WITHIN THE VOLTAGE RATING.
•ENSURETHE MARKED TRATING IS LESS THAN THE IGNITION TEMPERATURE OF THE HAZARDOUS
ATMOSPHERE.
•DO NOT OPERATE IN AMBIENT TEMPERATURES ABOVETHOSEINDICATED ON THE PRODUCT
NAMEPLATE.
•DO NOT OPERATE IF THE LENS, CORD, SEALS, HOUSING, RECEPTACLES, ETC. IS CRACKED OR DAMAGED.
IFSO, DISCONTINUE USEAND CONTACT MANUFACTURER FOR REPLACEMENT PARTS.
•ALL FASTENERS SHOULDBE PROPERLY SEATED.
The EPL-LED-150W-RT-XEMG-SP0009 from Larson Electronics is a Replacement Remote Battery Backup System for the EPL-
LED-150W-RT-100C-XEMG-10C explosion proof flood light. This replacement battery backup system can be used to replace lost,
malfunctioning, damaged, or otherwise compromised battery backup systems on the EPL-LED-150W-RT-100C-XEMG-10C explosion
proof flood light.
EPL-LED-150W-RT-XEMG-SP0009
Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com
2of 3
For supplyconnections, use wire rated for at least 110°C
WIRING
Standard pigtail(flying leads) wiring
We strongly encourage a licensed electrician install this product,in all locations especially in outdoor areas
where weatherproofing may be required. Universal voltage driver permits operation at 100V - 277V AC, 50 or 60Hz
except those factory ordered with low voltage 11V to 25V AC/DC.
Warning: Check product label for correct input voltage!
Attach supply line wires to the appropriate light fixture wires as shown
in thediagram
Secure each pair of wires according to the diagram. Utilize a junction box or
similar device and take precautionary steps for weatherproofing all
connections if installed in a location where water may come in contact with the
unit. Ensure the unit is properly grounded and that wiring is done according to
all local and national electrical/building codes.
WARNING: The emergency battery backup enclosure and plug are NOT rated for Hazardous
Areas. The Emergency Battery Backup enclosure AND Cord Cap MUST remain OUTSIDE the
Hazardous Area during use!
Keep emergency battery backup ballast box closed at all
times during operation. Follow all applicable local, state, and
National Electrical Code for the hazardous area!
WARNING: CHECK NAMEPLATE
FOR PROPER VOLTAGE. DAMAGE
FROM IMPROPER VOLTAGE WILL
VOID WARRANTY.
MAINTENANCE
Caution: To avoid personal injury, disconnect power to the light and allow the unit to cool down before
performing maintenance.
Warning: No user serviceable parts inside of fixture. Risk of electric shock. Removal of the lens will void
the warranty.
1. Perform visual, mechanical and electrical inspections on a regular basis. We recommend routine
checks to be made on a yearly basis. Frequency of use and environment should determine this. It is
recommended to follow an Electrical Preventive Maintenance Program as described in NFPA 70B:
Recommended practice for Electrical Equipment.
2. The lens should be cleaned periodically as needed to ensure continued photometric performance.
Clean the lens with a damp, non-abrasive, lint-free cloth. If not sufficient, use mild soap or a liquid
cleaner.
3. Inspect the cooling fins on the luminaire to ensure that they are free of any obstructions or
contamination (i.e. excessive dust build-up). Clean with a non-abrasive cloth if needed.
4. Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.
This explosion proof LED light fixture is field serviceable. All major internal components can be purchased
from Larson Electronics and installed by a licensed electrician with basic tools. Contact the manufacturer for
replacement parts.
EPL-LED-150W-RT-XEMG-SP0009
Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com
3of 3
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use.Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The EPL-LED-150W-RT-XEMG-SP0009 is designed to provide years of reliable performance. Should the need for
replacement parts arise, please contact Larson Electronics.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
SALES@LARSONELECTRONICS.COM OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR WARRANTY AND RETURN INFORMATION.
Indice
Altri manuali Larson Electronics Proiettore
Larson Electronics
Larson Electronics Stryker Light Manuale
Larson Electronics
Larson Electronics HID-22-SL-3M-GAP Manuale utente
Larson Electronics
Larson Electronics EPL-LED-150W-RT-20-HDBC Manuale utente
Larson Electronics
Larson Electronics EPLC2-WPLED-50W-RT Manuale utente
Larson Electronics
Larson Electronics HAL-LED-174W Manuale utente
Larson Electronics
Larson Electronics LEDWP-LP-450-TRN-DCM Manuale utente
Larson Electronics
Larson Electronics EPLC2-LED-150W-RT-DIMM Manuale utente
Larson Electronics
Larson Electronics LEDWP-600E-SSB-1227-56K Manuale utente
Larson Electronics
Larson Electronics GLR-FLK-2 Manuale utente
Larson Electronics
Larson Electronics LEDWP-500-M-20C Manuale utente
Larson Electronics
Larson Electronics BL24-LED Manuale utente
Larson Electronics
Larson Electronics LEDWP-600E-M Manuale utente
Larson Electronics
Larson Electronics HAL-PRM-150W-LED Manuale utente
Larson Electronics
Larson Electronics WAL-M-3X48LED-120 Manuale utente
Larson Electronics
Larson Electronics EPL-20W-HID-X12V-25-HR Manuale utente
Larson Electronics
Larson Electronics WAL-QP-4X500-25 Manuale utente
Larson Electronics
Larson Electronics EPL-LED-2X150W-RT Manuale utente
Larson Electronics
Larson Electronics HAL-TRN Series Manuale utente
Larson Electronics
Larson Electronics EPLC2-LED-150W-RT-JB2-25C Manuale utente
Larson Electronics
Larson Electronics GL-4600 Manuale
