Laser 8010 Manuale utente
www.lasertools.co.uk
Part No. 8010
Cordless Angle Grinder 20V
(without Battery)
Instructions
Battery & charger available separately,
please see Laser part numbers:
8007: 10-cell lithium-ion battery (4.0Ah).
8008: Battery charger (UK plug).
8009: Battery charger (Euro plug).
2
www.lasertools.co.uk
This cordless angle grinder is part of the Laser professional workshop ‘one battery
powers all’ cordless tool range with brushless motor technology designed and built
for daily use. Cordless power is fast becoming the experts’ choice over mains and
pneumatic, bringing extra safety to the workforce environment.
This angle grinder features a compact design with comfortable grip. Supplied with a
robust side handle and soft-grip body for added control. Spindle lock for quick disc
changes and fully adjustable disc guard. Equipped with metal gears within a steel
gear casing. M14 spindle for use with 115mm grinding or cutting discs.
This cordless tool is powered by a 4Ah lithium-ion battery (not included) that
delivers fade-free performance for the entire run time. The tool will not experience
a slow, gradual loss of power. When the battery needs to be charged the tool will
stop. No memory effect on the battery allows the battery to quickly recover from a
deep discharge with no reduction of capacity. The battery features an LED power-
bar to determine its condition (level of power available).
Note: battery and battery charger not included. These are available under the
following part numbers:
8007: 10-cell lithium-ion battery - 4.0Ah.
8008: Mains powered battery charger — fitted with UK plug.
8009: Mains powered battery charger — fitted with euro plug.
Refer to specific instructions included with battery and battery charger for details of
fitting the battery pack to the tool and charging method.
Introduction
3
www.lasertools.co.uk
4
www.lasertools.co.uk
Ref. Description
1Spindle lock button
2Gear case
3ON / OFF switch
4Side handle
5Disc guard
6Battery
7Battery release button
Components
5
www.lasertools.co.uk
Operation:
Specifications
Voltage 20V
No load speed 8000 RPM
Disc diameter 115mm (4.5")
Spindle thread size M14
Noise 85-130 dB
Weight (no battery) 1.6kg
Weight (with battery) 2.2kg
Instructions
Fitting side handle:
6
www.lasertools.co.uk
Instructions
Instructions
7
www.lasertools.co.uk
Instructions
Instructions
Fitting a disc:
WARNING: Remove battery pack before fitting or removing grinding/cutting discs.
• Always work with guard in place — adjust guard to suit work angle (Fig. 3).
• Press spindle lock button to lock gearbox (Fig. 1).
• Use supplied pin-wrench to loosen / tighten the flange nut when replacing or changing
grinding or cutting discs (Fig. 4).
• Orientation of flange nut depends on the fitment of a flat cutting disc, a depressed centre
cutting disc, a flat grinding disc or a depressed centre grinding disc (Fig. 5).
• Ensure flange nut is fully tightened with spindle locked. Release spindle lock button when
tight.
WARNING: Do not use discs that are cracked or damaged.
• The ON/OFF switch (3 in Fig. 1) is designed to avoid accidental starting — push forward
then press down to lock in the ON position.
• To switch OFF, press down on rear of switch, it will slide back and OFF.
WARNING: The grinder will kick to the right when it starts — be aware of this and ensure
that it is gripped tightly in both hands. Choose the position for the side handle to maintain
comfortable use and stability (Fig. 6).
Fitting a disc:
8
www.lasertools.co.uk
Instructions
9
www.lasertools.co.uk
Instructions
Fitting a disc:
WARNING: Risk of hand and arm vibration injury. The operator (or employer) will need to
carry out a health and safety risk assessment to determine a suitable duration for the use of
the tool. This will be affected by the operator, the task, the material of the workpiece, and
condition of tool.
10
www.lasertools.co.uk
• Ensure that all operators have read and understood these instructions.
• Wear approved PPE: eye protection, ear defenders, gloves and protective clothing. If the
grinding generates dust, wear a particle mask.
• Ensure no loose clothing, ties, watches, jewellery, etc. Contain long hair.
• Keep work area clean, tidy and free for any obstructions. Ensure adequate lighting.
• Refer to specific instructions included with battery and battery charger for details of fitting
the battery pack to the tool and charging method.
• Always remove the battery pack before changing grinding / cutting discs, adjusting the
guard or performing any maintenance.
• Only use approved grinding or cutting discs — do not use discs that are cracked or
damaged.
• Ensure workpiece cannot move around — mount in a vice or secure with clamps if
necessary.
• Do not switch on the grinder if the disc is in contact with the workpiece.
• Do not touch the grinding disc when the grinder is switched on.
• Do not touch the workpiece immediately after grinding or cutting, it will be very hot.
• Do not use the grinder if it is damaged or parts are missing.
• Do not operate the grinder in the presence of flammable material, liquids or gases. The
grinder will produce a stream of sparks (especially when grinding metal) that are a potential
source of ignition.
• Do not allow the grinder sparks to make contact with the operator’s clothing.
• Do not grind any materials containing asbestos.
• Do not let the air vents on the grinder become clogged with dirt or covered in any way; this
will cause overheating.
• Do not let the grinder get wet or use in damp or wet conditions.
• Do not use the grinder as a fixed tool (for example, mounted in a vice) and do not leave the
grinder running unattended.
• When not in use, remove the battery pack and store in dry, secure conditions.
• Keep the tool clean at all times. Always wear eye protection and protective gloves when
cleaning the tool. For cleaning use a dry cloth and soft brush. Water must never come in
contact with the tool. Use clean, dry compressed air to blow through the air vents.
• Do not use the grinder for tasks it is not designed for. Use the product correctly and with
care. Failure to do so may cause damage and/or personal injury and will invalidate the
warranty.
Safety Warnings - please read
Indice
