Launch J2534 Manuale utente

LAUNCH Smartbox 3.0-J2534 Operation Manual

1/ 15

Smartbox 3.0-J2534 Operation Manual

LAUNCH Smartbox 3.0-J2534 Operation Manual

2/ 15

Content

1Connection of Smartbox3.0 ......................................................................................................3

2Installation of Software Package and Driver.............................................................................3

2.1 Installation Steps of Software Package .........................................................................3

2.1.1 Installation Steps of Software Package .............................................................3

2.1.2 J2534 Registry Information View (Reserved)...................................................6

3Firmware Upgrade and Log Generation....................................................................................7

3.1 Firmware Upgrade Function .........................................................................................8

3.2 Log View Function........................................................................................................8

3.3 Communication Method Configuration (Reserved)....................................................10

3.3.1 Communication Method Configured as USB..................................................10

3.3.2 Communication Method Configured as USB to Ethernet Adapter .................12

LAUNCH Smartbox 3.0-J2534 Operation Manual

3/ 15

1Connection of Smartbox3.0

Smartbox3.0 comes with a USB cable.

One end of Smartbox3.0 is connected to the USB cable: one port of the USB cable is connected to

Smartbox3.0; the other port is connected to a USB port of a PC; the other end of Smartbox3.0 is

connected to the OBD interface bus, and the other port of the bus is connected to the OBD

connector.

2Installation of Software Package and

Driver

2.1 Installation Steps of Software Package

2.1.1 Installation Steps of Software Package

Attention：Please ensure that the PC user has administrator

rights and Smartbox3.0 has been connected to a PC before

installation.

Step 1:Open "SmartBox_3.0_Setup.exe", and select the installation path according

to prompts

Step 2: Click 'Change' to select the installation path, and then click 'Next'

LAUNCH Smartbox 3.0-J2534 Operation Manual

4/ 15

Step 3: After confirming the installation path, click 'Next'

Step 4: Click 'Next' to start to install the driver. It is recommended to have the

device connected before installing the driver. The software shall install by itself.

LAUNCH Smartbox 3.0-J2534 Operation Manual

5/ 15

Step 5: Click 'Done'. Drivers installed!

Step 6: Click 'Done' again. Software installed!

LAUNCH Smartbox 3.0-J2534 Operation Manual

6/ 15

2.1.2 J2534 Registry Information View (Reserved)

After installing the software, LAUNCH's corresponding registration information about J2534Dll

can be seen in the registry. Open "Run" window (shortcut "Windows+R"); enter the command

"regedit", as shown below:

Enter the registry, and find LAUNCH's J2534 DLL registration information according to the

following path: HKEY_LOCAL_MACHINE\SOFTWARE\PassThruSupport.04.04

LAUNCH Smartbox 3.0-J2534 Operation Manual

7/ 15

Note: It may be because of the 64-bit operating system, if you cannot view the registration

information. You can find it according to the following path:

HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\PassThruSupport.04.04

The Screenshot is shown below:

3Firmware Upgrade and Log Generation

Run "SmartBox Tool 3.0" on the Windows desktop after installing

"SmartBox_3.0_Setup".

LAUNCH Smartbox 3.0-J2534 Operation Manual

8/ 15

3.1 Firmware Upgrade Function

SmartBox 3.0 can be upgraded through SmartBox Tool 3.0. Please select "M7

Upgrade" for the upgrading of lower programs and "A7 Upgrade" for the

upgrading of the system. Click "Browse" to select the path for storing upgrading

files and click "Upgrade".

Note: Restart the software and SmartBox 3.0 upon completion of the

upgrade. You can check the version to confirm whether the upgrade is

successful.

3.2 Log View Function

When necessary, you can enable "Write Log File" or "Window Print Information"

function to record the test status of SmartBox 3.0 and the process. To avoid software

errors due to overlarge log files, do not enable the function if it is not necessary. The

log files are saved under the root directory of disk C by default.

Steps: The corresponding J2534Log information can be generated by ticking the

“Write Log File” option after clicking “View Log” in the upper left corner of the

software interface, as shown below:

LAUNCH Smartbox 3.0-J2534 Operation Manual

9/ 15

Note: Please restart the diagnostic software!

Note: If the log printing function is enabled, the log files may be very large as the information

are written accumulatedly. Please enable this function when necessary, such as development and

debugging. In other cases, please do not activate this function option at will.

The default storage path of the log file "J2534Log" generated is: C:\Program Files\SmartBox

3.0\SmartBox 3.0\Log\ J2534_LOG.txt, as shown below:

Also note: In some computer systems, users have no write permission to this file folder, resulting

in unsuccessful log file generation. It is necessary to modify the permissions of this folder

(requiring administrator privileges), as shown below:

LAUNCH Smartbox 3.0-J2534 Operation Manual

10 / 15

Right-click the "Log" folder, select the "Attribute" option and find the "Security" attribute, select

current user, click "Edit", select the corresponding user name again, and tick all the "Allow"

options in the permission column (requiring administrator rights), and click "OK" to go back.

3.3 Communication Method Configuration (Reserved)

SmartboxTool can be used only when the USB mode configuration function is available.

3.3.1 Communication Method Configured as USB

Indice

Altri manuali Launch Apparecchiature diagnostiche

Launch

Launch iCarScan Manuale utente

Launch

Launch X-431 PADII Manuale utente

Launch

Launch Creader Professional 229 Manuale utente

Launch

Launch X-431 PADII Manuale utente

Launch

Launch CRT5011E Manuale utente

Launch

Launch Creader Professional 123E Manuale utente

Launch

Launch CReader 6011 Manuale utente

Launch

Launch X-431 PADII Manuale utente

Launch

Launch X-431 PROS V4.0 Manuale utente

Launch

Launch CNC-602A Manuale utente

Launch

Launch Creader Professional 909 Manuale utente

Launch

Launch X-431 GDS Manuale utente

Launch

Launch X-431 Turbo III Manuale utente

Launch

Launch X-431 IMMO Pro Manuale utente

Launch

Launch Creader Elite Manuale utente

Launch

Launch CReader Professional CRP329 Manuale utente

Launch

Launch Creader Professional CRP129E Manuale utente

Launch

Launch CReader V Manuale utente

Launch

Launch Creader Professional 909E Manuale utente

Launch

Launch Creader 7001S Manuale utente

Launch

Launch X-431 PADII Manuale utente

Launch

Launch X-431 PAD V ELITE Manuale utente

Launch

Launch CRT 511S Manuale utente

Launch

Launch CRT 7 Series Manuale utente

Manuali Apparecchiature diagnostiche popolari di altre marche

Mindray

Mindray M7Vet Guida rapida

Autel

Autel MaxiProgrammer 201 Manuale utente

TEXA

TEXA TMD2 Manuale utente

Autel

Autel MaxiIM IM608 Manuale utente

Sealey

Sealey BT2012 Manuale utente

Diagnoptics

Diagnoptics Age Reader Manuale utente

LAUNCH TECH

LAUNCH TECH X-431 PRO5 Manuale utente

Hella Gutmann

Hella Gutmann Mega macs X Manuale utente

Foxwell

Foxwell I80TS Manuale utente

KaVo

KaVo 3D eXam Manuale utente

ATEQ

ATEQ VT46 Manuale utente

Hella Gutmann

Hella Gutmann mega macs X Manuale utente

Autel

Autel MaxiFlash VCMI Manuale utente

Qiagen

Qiagen QIAcube Connect MDx Manuale utente

Alber

Alber BDSU Manuale utente

St. Jude Medical

St. Jude Medical QUANTIEN Manuale utente

Bosch

Bosch DCU 100 Manuale utente

Innova

Innova 3568 Manuale utente