sebamicro.com
Thank you for purchasing the SeBa Digital
Imaging System. The SeBa system is
shipped fully configured and ready to use.
This Quick Start Guide is a quick reference
for you to use to familiarize yourself with
the operation. For complete details of
the SeBa system please refer to the User
Manual located on the SeBa USB drive.
Items included:
- SeBa Imaging System
- Power Supply
- SeBa Access Card
- SeBa USB Drive
- Keyboard and Mouse
- Dust Cover
- Immersion Oil
- Lens Paper
- Allen Wrench
- Quick Start Guide
- PL Models
- Analyzer
- Polarizer
- Compensator, λ, rst order red
Power On
SeBa Access Login
1. Turn on power switch which is
located on the back of the microscope
on the right hand side of the SeBa
system.
2. The SeBa Touchscreen user
interface will open automatically after
turning on the power.
1. To connect to your SeBaShare
account, place your SeBa Access card
in front of the SeBa logo on the front of
the microscope.
2. To verify that you are logged into
a SeBaShare account, go to the
Gallery Menu. The SeBaShare button
indicates if you are logged in. If the
button is grayed out, repeat login steps
above.
View Live Image
1. Place slide into the slide insert on the
microscope stage.
2. Select desired objective
3. Focus the sample on screen by
using the coarse and fine focus knobs.
4. Adjust Illumination to desired level.
5. Move the position of the sample by
adjusting the x/y position of the stage
to desired position.
6. Adjust image by using the settings
menu on the touchscreen interface.
Initial Setup
1. Remove the SeBa from its packaging
and place it on a solid flat surface.
2. Ensure power switch is in the “0”
(OFF) position.
3. Plug power supply into the back of
the microscope and plug cord into an
outlet.
4. Optional: Connect optional
accessories into USB port(s) (mouse,
keyboard, USB drive).
