LC-POWER Gaming 978BG Manuale utente

User manual

Gaming 978BG - Tank-Buster

Content

Chapter 1 Product introduction

1.1 Specification.....................................................................................03

1.2 Accessory..........................................................................................04

Chapter 2 Installation guide

2.1 Side panel assembly..............................................................................05

2.2 Motherboard installation......................................................................06

2.3 5,25” de ice installation........................................................................07

2.4 3,5” de ice installation.....................................................................08-09

2.5 2,5” de ice installation..........................................................................10

2.6 PSU installation.....................................................................................11

2.7 Fan installation................................................................................. 12-13

2.8 Water cooling installation................................................................13-14

2.9 Front panel control & I/O installation..............................................14-16

Thank you for purchasing the “Gaming 978BG - Tank-Buster” case

from LC-Power. Please read this manual before usage.

Specifications may be subject to change without prior notice.

Chapter 1 Product introduction

1.1 Specification

Dimension 238（w）x 560（h）x 590（d）mm

Material Steel (SECC)

Front & top panel：ABS + meshed designed

5,25” dri e bay 4 external

3,5” dri e bay 6 internal – HDD cage with hot swap feature

2,5” dri e bay 3 internal

PCI slot 9

I/O Panel 2x USB 3.0, 2x USB 2.0, 1x Audio, 1x Mic,

fan speed control for up to 5 fans

Control Panel Power switch, Reset switch, Power LED, HDD LED

Cans fans mounting

options

Front: 2x 120 mm (included in deli ery)

Back: 1x 120 mm (included in deli ery)

or 1x 140 mm

Top：3x 120 mm

Bottom: 2x 120 mm

Water cooling: support up to 360 mm radiator on

top and up to 240 mm radiator on bottom

Motherboard E-ATX / ATX / Micro-ATX / Mini-ITX

Power Supply ATX standard

Compatibility Graphic card up to 340 mm

CPU cooler up to 190 mm

1.2 Accessory

Accessory box contents: 1x user manual, 1x screw bag

Standoff Screw Screw Screw

5H-6#*4- 6#*6.5HCu M3*5 6*5KM 3*8*8PWA

10PCS 20PCS 24PCS 4PCS

Plastic hand screws Screw Cable tie Cable tie

6#-32 6#6HW-TC L=120mm L=150mm

10PCS 4PCS 3PCS 3PCS

Plastic standoff

3PCS

Chapter 2 Installation guide

2.1 Side panel assembly

1. Remo e the side panel:

Remo e the screws on the back of the chassis and open the side panel.

2. Reattach the side panel:

Align the side panel with hook holes to close the side panel.

Fix it with screws.

2.2 Motherboard installation

1. Screw the standoffs on the holes for the motherboard installation bracket.

2. Install the motherboard in a proper location and fix it with the pro ided

screws.

Note: CPU, RAM and any peripheral installation steps are not included in this manual.

Please refer to your motherboard manual for related mounting instructions .

2.3 5,25” de ice installation

1. Press the latch to remo e the 5,25” dri e co er from the chassis by pushing it

inside out. Now put the 5,25” ODD into the dri e bay.

2. Fix the 5,25” ODD with the quick release screws on the side.

2.4 3,5” de ice installation

1. Open the side panel with the help of the latch.

2. Push the latch of the dri e bay and take out the 3,5” dri e bay tray.

3. Place an HDD into the dri e bay tray and secure it on the bottom of the tray

with the pro ided screws. Re erse the abo e mentioned steps to place the

HDD tray in the de ice cage.

4. Connect the backplane with a 4 pin Molex/PATA connector of the power

supply.

Connect the backplane to the motherboard with the help of SATA cables.

Note: The user may choose the direction of the 3,5” dri e cage. This

will help the user to arrange the chassis placement flexibly. Please

refer to the pictures below for the further information.

2.5 2,5” de ice installation

Gaming 978BG pro ides three positions for the 2,5” HDD/SSD installation.

Two HDDs/SSDs on the side of the 5,25” dri e cage and one HDD/SSD under the

3,5” HDD cage location.

1. Open the side panel with the help of the latch.

2. Place the 2,5” HDD/SSD in a proper location as shown below and fix it with

the pro ided screws.

3. For the third position, release the screw on top of the 3,5” HDD cage and

remo e it. Put the 2,5” HDD/SSD on the bottom side of the bracket as shown

below and secure the HDD/SSD with the pro ided screws.

Indice

Altri manuali LC-POWER Hardware per computer

LC-POWER

LC-POWER LC8550 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente