LP-32DIP-WICE-3.3V LP-32DIP-WICE-3.3V x 2pcs
4
, , Address BUS ,
'LP-32DIP-WICE-3.3V' ,
If your circuit is faster or it's easily under effects of noise or the Address BUS driver is
not good enough, you can take the special modules"LP-32DIP-WICE-3.3V" to use to
connecting way of the following picture.
EPROM-POD
3
, , ,
, EPROM-POD
If your circuit is faster or it's easily under effects of noise, you can take out the parallel
lines. Use to connecting way of the following picture and connect EPROM-POD into
the target board.
One or two ports output is according
to the volume.
J1 ,
28 32
Attention to the J1 setup. The
choice of 28 or 32 is based on
the devices.pins of the
WICE-4M-4096
LP-32DIP-WICE-3.3V x 2pcs
&WICE-4MA :
The connecting wayof the deviceup to 256Kx8Bit( 27C020/27LV020 ).
&WICE-8MA :
512Kx8Bit ( 27C040/27LV040 )
The connecting wayof the deviceup to 512Kx8Bit( 27C040/27LV040 ).
256Kx8Bit ( 27C020/27LV020 )
&WICE-4MA :
The connecting wayof the device256Kx8Bit ( 27C040/27LV040 ).
&WICE-8MA :
512Kx8Bit ( 27C080/27LV080 )
The connecting wayof the device512Kx8Bit ( 27C080/27LV080 ).
512Kx8Bit ( 27C040/27LV040 )
&WICE-4MA :
1024-2048
The connecting wayof the deviceup to 256Kx16Bit( 27C1024-2048/27LV1024-2048 ).
&WICE-8MA :
512Kx16Bit ( 27C1024-4096/27LV1024-4096 )
The connecting wayof the deviceup to 512Kx16Bit( 27C1024-4096/27LV1024-4096 ).
256Kx16Bit ( 27C1024-2048/27LV )
: 'LP-32DIP-WICE-3.3V'
,
P.S.: "LP32DIP-WICE-3.3V" is an optional
accessory, please call LEAP ELECTRONIC
for details.
