Lechange F Series Manuale utente
Quick Start Guide
Version 1.0.0
Contents
Quick Start Guide___________________________________________________ 1
Packing List ____________________________________________________ 11
Product Appearance _____________________________________________ 12
Operation by Lechange App _______________________________________ 23
Add Alarm Sensor _______________________________________________ 34
Device Installation _______________________________________________ 45
Kurzanleitung ______________________________________________________ 5
Lieferumfang ___________________________________________________ 51
Überblick ______________________________________________________ 52
Bedienung über Lechange-App_____________________________________ 63
Alarmsensor hinzufügen __________________________________________ 74
Installation des Geräts____________________________________________ 85
Guía de inicio rápido _______________________________________________ 10
Contenido ____________________________________________________ 101
Apariencia del producto__________________________________________ 102
Funcionamiento usando la aplicación Lechange_______________________ 123
Añadir el sensor de alarma _______________________________________ 124
Instalación del dispositivo ________________________________________ 135
Guide de démarrage rapide __________________________________________ 15
Contenu de l’emballage__________________________________________ 151
Différentes faces du produit_______________________________________ 152
Fonctionnement avec l’application Lechange _________________________ 173
Ajouter le capteur de l’alarme _____________________________________ 174
Installation de l’appareil__________________________________________ 185
Snelstartgids______________________________________________________ 20
Paklijst _______________________________________________________ 201
Kenmerken van het product_______________________________________ 202
Bediening via de Lechange App ___________________________________ 213
Voeg een alarmsensor toe________________________________________ 224
Installatie van het apparaat _______________________________________ 235
Guida introduttiva__________________________________________________ 25
Contenuto della confezione_______________________________________ 251
Come si presenta il prodotto ______________________________________ 252
Funzionamento tramite app Lechange ______________________________ 273
Aggiunta del sensore di allarme____________________________________ 274
Installazione dispositivo__________________________________________ 285
Guia de Início Rápido_______________________________________________ 30
Lista da embalagem ____________________________________________ 301
1
Quick Start Guide
Packing List1
Device *1 QSG *1Power Adapter *1
Screw Package *1 Quick Installation Board *1 Installation Position Map *1 USB *1
Product Appearance2
Figure 2-1
2
Note
To reset, long press for 10 seconds till the light is off; to enable WPS, just press the
button.
Figure 2-2
Please refer to Table 2-1 for more details about status of indicator light.
Indicator light status
Device status
Spinning red
Booting
Device malfunction
Failed to boot up
Spinning green
Booting completed
Waiting for Wi-Fi configuration
Flashing yellow
WiFi connection process.
Flashing green
Pairing with alarm sensor.
Blue light stably on
Wi-Fi connection succeeded
Operate normally
Flashing blue
Device upgrade
Flashing yellow
Device has been configured with WiFi, but it failed to work
normally.
Flashing red
Alarm or SD card malfunction.
Pairing failed.
Table 2-1
Operation by Lechange App3
Step 1 Power on your camera with power adapter.
3
Step 2 Connect your smartphone to your Wi-Fi network, scan “Lechange” QR on
the packing box, download and install Lechange App.
Step 3 Run Lechange App, and register account for first use.
Step 4 Follow the steps below to add your camera (Figure 3-1).
Figure 3-1
Note
- If you have more cameras, please follow step 4 to add them one by one.
- If you want to change the Wi-Fi signal, please reset the camera to factory default
and repeat step 4 to add the camera.
Add Alarm Sensor4
Note
- The alarm sensor is not included by default; you need to purchase it separately if
necessary.
- There are two ways to add alarm sensor.
Method 1
Step 1 Press camera Reset/Pair button for 2s to enter pairing mode, and then the
green light flashes.
Step 2 Press the pair button of alarm sensor and the indicator light will flash
quickly and continuously.
4
Step 3 The green light of camera will stop flashing if pairing succeeds; the red light
will flash for 10s and then disappear if pairing fails.
Method 2
Scan the QR code on the device with Lechange app, and then follow app guide to
operate.
Device Installation5
Note
Before installation, please make sure the installation environments can at least
support 3x weight of the device.To install the device, do the following.
Step 1 Drill holes on the wall and install the
expansion bolts into the drilled holes.
Step 2 Fix the installation board with screws
onto the wall.
Step 3 Spin the device to get locked onto the
installation board.
Disclaimer
- This quick start guide is for reference only.
Minor difference might be found in user interface.
- All the designs and software here are subject to change without prior written
notice.
- All trademarks and registered trademarks mentioned are the properties of their
respective owners.
- Please visit our website or contact your local service engineer for more
information.If there is any uncertainty or controversy, please refer to our final
explanation.
5
Kurzanleitung
Lieferumfang1
1 x Gerät 1 x Kurzanleitung 1 x Netzteil
1 x Befestigungsmaterial 1 x Montageplatte 1 x Montageschablone 1 x USB-Kabel
Überblick2
Abbildung 2-1
Netzteil
microSD-Kartensteckplatz
Netzwerkanschluss
LED-Anzeige
Rücksetz-/Kopplungstaste
6
Hinweis
Zum Zurücksetzen halten Sie die WPS/Rücksetztaste für 10 Sekunden gedrückt,
bis die Anzeige erlischt. Um WPS zu aktivieren, drücken Sie die Taste einmal kurz.
Abbildung 2-2
Nähere Informationen zum Status der LED finden Sie unter Tabelle 2-1.
Anzeigestatus
Gerätestatus
Rotierendes Rot
• Gerät fährt hoch
• Gerätestörung
• Hochfahren fehlgeschlagen
Rotierendes Grün
• Hochfahren abgeschlossen
• Warten auf WLAN-Konfiguration
Gelb blinkend
• WLAN-Verbindung läuft
Grün blinkend
• Kopplung mit Alarmsensor
Blaue LED leuchtet
• WLAN erfolgreich verbunden
• Funktioniert ordnungsgemäß
Blau blinkend
• Geräteaktualisierung
Gelb blinkend
• Mit WLAN verbunden, aber Gerät ist
Rot blinked
• Alarm oder SD-Karte Fehlfunktion
• Kopplung fehlgeschlagen
Tabelle 2-1
Bedienung über Lechange-App3
Schritt 1 Verbinden Sie Ihre Kamera mit dem mitgelieferten Netzteil
Mikrofon
Objektiv
Indice
Lingue:
Altri manuali Lechange Telecamera di sicurezza
