Lectron EVCharge6-20 Manuale utente
Portable Electric Car Charger
(Level 2, 16A) User Manual
Package Includes
Safety Information
• 1 x Portable Electric Car Charger
• 1 x User Manual
• It is recommended that electrical outlets for your charger should be installed by a
licensed and qualified electrician. To avoid serious injury or death; installation
must comply with the provisions of the National Electric Code (NEC) and all local
codes. In cases of any conflict between the local codes and the NEC, local codes
shall take precedence.
• This product must be grounded. If it should malfunction or break down, ground-
ing provides a path of least resistance for electric current to help reduce the risk
of electric shock. This product includes a cord that is equipped with a grounding
conductor and a grounding plug. The plug must be inserted into an appropriate
outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
• Do NOT DROP the charger or coupler (see image in the Charger Components
section below).
• If the output plug separates from the charger module or the charge coupler, DO
NOT ATTEMPT TO REPAIR THE CABLE YOURSELF. Contact LECTRON Customer
• When using your charger, basic precautions should always be followed, including
the following:
• Read warnings on the charger cord label before operating the charger for
the first time. Read all instructions in this guide before using this charger.
• Never use the charger with an extension cord.
• Never use the charger with any AC adapter.
• Shock hazard – make sure the plug is fully inserted into the wall outlet
so that there are no exposed blade surfaces.
Charger Components
• Children should be supervised when in the vicinity of the charger while
plugged in.
• To reduce the risk of fire, connect only to a circuit provided with 20 amps
maximum branch circuit overcurrent protection.
• Power
• Connected
• Charging
• Fault
Charge Coupler
Release Button
Charging Your Vehicle
1. Insert the charger into an appropriate wall outlet.
Note:
Ensure that the car is parked and the engine is turned OFF.
2. The indicator lights for Power & Connected will light up and stay solid to show
that the charger is receiving AC power and is ready for use.
FAULT
CHARGING
CONNECTED
POWER
3. Plug the Charge Coupler into your vehicle’s charging outlet until it clicks. Once
latched, the Charge Coupler will not disengage until the release button has been
pressed manually.
4. Charging begins automatically. Power will be delivered in accordance to the
demand of the vehicle. While chaging, the Charging Indicator will blink
continuously. Always verify that the vehicle charging status indicator by
checking your vehicle panel.
FAULT
CHARGING
CONNECTED
POWER
5. When the vehicle is fully charged, the Charging Indicator light will stay solid. Your
vehicle has a “dashboard gauge” which can verify that the vehicle is fully charged.
Refer to the vehicle owner’s manual to find the location of the gauge on your
dashboard.
FAULT
CHARGING
CONNECTED
POWER
Fully Charged
210 V6/6 A+ 0 km
6. Disconnect the charger when the charge is completed by pressing the release
button on the Charge Coupler and removing it from the vehicle.
Troubleshooting
Please refer to this troubleshooting guide for possible solutions to common errors
or difficulties when charging your vehicle using the portable charger.
Problem Possible Cause Solution
Charging Indicator does
not illuminate.
No power to the charger. 1. Check the circuit breaker and other circuit loads.
2. Try another wall outlet.
3. Ensure that the charger module (and adapter if
operating in 240 VAC mode) is fully inserted into the wall
outlet.
Charger internal failure. Contact Lectron Customer Support at
Vehicle will not charge.
Fault Indicator remains
solid.
Charge Coupler is not inserted into the
vehicle.
1. Inspect the charge coupler.
2. Remove the charge coupler from the vehicle, then
reinsert it into the vehicle receptacle until it clicks.
Vehicle is not in a state to accept any
charge.
Verify that the vehicle charge timer is set to permit
charging. Refer to the vehicle owner’s manual for charge
timer instructions.
Communication error between the
charger and vehicle.
Contact Lectron Customer Support for assistance.
Fault Indicator is blinking
rapidly.
Utility fault. 1. Disconnect the charger module from the wall outlet,
then reconnect it.
2. If the condition persists, have a qualified electrician
inspect the ground circuit of the wall outlet.
Above the temperature limit.
Cases:
1. Temperature is too high. The
charger will restart charging when it
cools down.
2. House/socket wiring may be
faulty.
1. Inspect the charger module for overheating.
2. Disconnect the charger from the wall outlet.
3. Have a qualified electrician inspect the wall outlet
and adapter.
a. Carefully unplug the charger module from the
wall outlet and allow to cool.
b. If the condition persists, contact Lectron
for assistance.
Specif i cation
Line Input Power : 240V
Voltage Range : 240V
Frequency : 60 Hz
Maximum Current : 16A
Cable Length : 18’(5.5m) of cable. Total reach length of 21’
Plug : NEMA 6-20/10-30 Plug
EV connector : SAE-J1772
Dimensions : 9.45’ (24cm) x 3.5’ (8.9cm) x 2.4’ (6cm)
Weight : 2.1 kg (4.6lbs)
Operating Temp : -30°C to +50°C (-22°F to +122°F)
Certification : cULus lited, FCC Part 15 Class B
For more information, visit:
www.ev-lectron.com
or contact us at
Made in China
Cargador Portátil de Coche Eléctrico
(Nivel 1, 16A) Manual de Usuario
Contenido del Paquete
Información de Seguridad
• 1 x Cargador Portátil de Coche Eléctrico
• 1 x Manual de Usuario
• Se recomienda que las tomas de corriente de tu cargador sean instaladas por un
electricista autorizado y cualificado. Para evitar lesiones graves o la muerte; la
instalación debe cumplir con las disposiciones del Código Eléctrico Nacional (NEC)
y todos los códigos locales. En caso de cualquier conflicto entre los códigos locales
y el NEC, los códigos locales tendrán prioridad.
• Este producto debe estar conectado a tierra. En caso de mal funcionamiento o
avería, la conexión a tierra proporciona un camino de menor resistencia para la
corriente eléctrica que ayuda a reducir el riesgo de descarga eléctrica. Este pro-
ducto incluye un cable equipado con un conductor de tierra y un enchufe con
toma de tierra. El enchufe debe insertarse en una toma de corriente apropiada
que esté correctamente instalada y conectada a tierra de acuerdo con todos los
códigos y ordenanzas locales.
• NO DEJES CAER el cargador ni el acoplador (véase la imagen en la sección de Com-
ponentes del Cargador).
• Si el enchufe de salida se separa del módulo cargador o del acoplador de carga,
NO INTENTES REPARAR EL CABLE TÚ MISMO. Ponte en contacto con el Servicio de
Atención al Cliente de LECTRON ([email protected]) para recibir ayuda.
• Al utilizar tu cargador, siempre debes seguir las precauciones básicas, entre ellas
las siguientes:
• Lee las advertencias de la etiqueta del cable del cargador antes de uti
lizarlo por primera vez. Lee todas las instrucciones de esta guía antes de
utilizar este cargador.
• No utilices nunca el cargador con un cable alargador.
• No utilices nunca el cargador con cualquier adaptador AC.
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Lectron Accessori per automobili
