LEDWORKS Twinkly Manuale
1
music
instructions guide | guida alle istruzioni | guide d’instructions
betriebsanleitung | guía de instrucciones | handleiding
GENERATION II
rev.01.05.L
3
Works only with Twinkly App, in combination with
Twinkly devices.
Funziona solo con l’app Twinkly, in combinazione con
i dispositivi Twinkly.
Fonctionne uniquement avec l’application Twinkly, en
combinaison avec les appareils Twinkly.
Funktioniert nur mit der Twinkly App in Kombination
mit Twinkly-Geräten.
Funciona solo con la aplicación Twinkly, en combina-
ción con dispositivos Twinkly.
Werkt alleen met Twinkly App, in combinatie met
Twinkly-apparaten.
EN
IT
FR
DE
ES
NL
4
EN
The crossed-out wheeled bin symbol indicates that the item should be
disposed of separately from household waste. The item should be handed
in for recycling in accordance with local environmental regulations for waste
disposal.
This device is designed for indoor use only. Protect the device from ex-
treme temperatures, direct sunlight, strong vibrations, excessive humidity,
liquids, ammable gases, vapors or solvents.
LEDWORKS Srl
Via Tortona 37 - 20139
Milano - Italy
Class A Disclaimer: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
5
Flashing Green: Power on, Not connected
Continuous Blue: Home Wi-Fi network mode, connected
Flashing Blue: Home Wi-Fi network connection in progress
Flashing Red: Home Wi-Fi network, unable to connect
Light Blue: SETUP MODE (Bluetooth ON)
Yellow: Firmware Update in progress
Continuous Red: General error
Flashing White: Reset procedure in progress
Solid White: Reset procedure complete
MICROPHONE
BUTTON
LED INDICATOR
USB CONNECTOR
Technical informations
Power IN..........................USB 5Vcc, 500mA max
Wi-Fi..................................802.11 b/g/n
Frequency.......................2,4 GHz
Range...............................max. 10 m
Bluetooth........................Bluetooth v4.2 BR/EDR and BLE
6
1. Plug Twinkly Music to the USB power outlet closest to the music source.
2. Launch Twinkly App and go to Menu > Devices > Add another device.
Select Twinkly music and follow the instructions on the App.
3. Once the App has found the Twinkly Music device, proceed to connect it
with your home/oce WiFi from the list of available networks (to which
your other Twinkly devices are connected).
Connecting...
5
sec
Setup device
EN
Choose your controller
GENERATION I
GENERATION II
TWINKLY MUSIC
7
1. Unplug Twinkly Music from the power outlet.
2. Press and hold the button on the Twinkly music. While holding the
button, plug back in the power outlet.
3. Keep holding the button until the LED indicator becomes solid white,
then release the button.
Reset device
1.
2.
3.
8
EN
1. Turn on your Twinkly lights and plug Twinkly Music device close to a
source of sound (i.e. loudspeaker, etc).
2. Make sure all the devices are connected to the same WiFi.
3. Press Twinkly Music button to activate music-driven eects.
4. Press Twinkly Music button again to change music driver until the
best eect is obtained.
Operation
1.
9
3.
4.
2.
10
IT
Il simbolo del bidone della spazzatura barrato indica che l’articolo deve
essere smaltito separatamente dai riuti domestici. L’articolo deve essere
consegnato per il riciclaggio in conformità con le normative ambientali locali
per lo smaltimento dei riuti.
Questo dispositivo è progettato solo per uso interno. Proteggere il
dispositivo da temperature estreme, luce solare diretta, forti vibrazioni,
umidità eccessiva, liquidi, gas inammabili, vapori o solventi.
LEDWORKS Srl
Via Tortona 37 - 20139
Milano - Italy
Disclaimer classe A: questa apparecchiatura è stata testata ed è conforme
ai limiti di un dispositivo digitale di classe A, conformemente alla parte 15 del
Regolamento FCC. Questi limiti sono progettati per fornire una protezione
ragionevole contro interferenze dannose in un impianto residenziale. Questa
apparecchiatura genera, utilizza e può irradiare energia a radiofrequenza e,
se non installata e utilizzata conformemente alle istruzioni, può causare
interferenze dannose alle radio comunicazioni. Tuttavia, non vi è alcuna
garanzia che l’interferenza non si verichino in un impianto particolare. Se
questo dispositivo dovesse causare un’interferenza dannosa alla ricezione
radio o televisiva, che può essere determinata spegnendo e accendendo
l’apparecchiatura, l’utente è incoraggiato a cercare di correggere
l’interferenza attraverso una o più delle seguenti misure:
• Riorientare o spostare l’antenna ricevente.
• Aumentare la distanza tra l’apparecchiatura e il ricevitore.
• Collegare l’apparecchiatura in una presa su un circuito diverso da quello
in cui il ricevitore è collegato.
• Consultare il rivenditore o un esperto tecnico radiofonico/televisivo per
aiuto.
Indice
Lingue:
Altri manuali LEDWORKS Accessori per l'illuminazione domestica
