2
To prevent a possible fire, DO NOT block air intakes or exhaust in any
manner. Doing so could cause a fire. DO NOT use on soft surfaces, like
a bed, where openings may become blocked.
As the appliance has hot and arcing or sparking parts inside. DO NOT
use it in areas where gasoline, paint, or flammable liquids are used or
stored.
AVOID FIRE! Regularly inspect all air vents to make sure they are free
from dust, lint, or other blockage. Unplug the unit and clean with a
vacuum ONLY. DO NOT rinse or get wet.
DO NOT USE this appliance with any solid state speed control devices.
Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!
NEVER modify this appliance. Doing so could result in personal injury
or property damage. Modification of this fireplace completely voids
all warranties.
NEVER leave this appliance unattended. To disconnect appliance,
ALWAYS turn controls to “OFF” then remove plug from outlet or turn
off circuit when not in use.
ALWAYS turn this appliance off before unplugging it from the outlet.
To prevent a possible fire, do not burn wood or other materials in
this appliance.
ALWAYS disconnect this unit from the power supply before
performing any assembly or cleaning, or before relocating the electric
fireplace.
Always use properly grounded, fused and polarized outlets.
Always use ground fault protection where required by electrical code.
Avoid use of an extension cord because an extension cord may
overheat and cause a fire. However if you have to use an extension
cord, the cord should be No.14 AWG minimum size and rated to not
less than 1875watts.
NEVER plug this appliance into an outlet that is old, cracked, or has
any loose wires or connections. Plugging this appliance into a faulty
outlet could result in electric arcing within the outlet that could cause
the outlet to overheat or catch fire.
