LENCO DVT-227 Manuale utente

Contents

zIntroduction

zWarning

zCaution

zMain Unit Description

zRemote Control

zOSD basic adjustment

zDVD manual

zSpecifications

zTrouble Shooting

Introduction

Thank you very much for your purchase of our product of LCD TV. It serves as a normal color

TV and PC monitor. To enjoy your set to the full from the very beginning, read this manual

carefully and keep it handy for ready reference.

INSTALLATION

①Locate the receiver in the room where direct light does not strike the screen. Total darkness or

a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended

for comfortable viewing.

② Allow enough space between the receiver and the wall to permit ventilation.

③Avoid excessively warm locations to prevent possible damage to the cabinet or premature

component failure.

④ This TV receiver can be connected to AC100-240V 50/60HZ.

⑤ Do not install the receiver in a location near heat sources such as radiator, air ducts, direct

sunlight, or in a place somewhere like close compartment and close area. Do not cover the

ventilation openings when using the set.

⑥The indicator light will last about 30 seconds to go out after cutting off the electricity, during

this period, you cannot repower it on until the indicator light goes out. Thanks a lot for your

attention!

Warning

This symbol is intended to alert the user to avoid the risk

of electric shock, do not disassemble this equipment by anyone

except a qualified service personnel.

This symbol is intended to alert the user to the presence

of important operation and maintenance instructions in

the literature accompanying the equipment.

CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER- SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Caution

Highvoltagesare used in the operation of this product.

- Do not remove the back cabinet from your set. Refer

servicing to qualified service personnel.

Caution

To prevent fire or electrical shock hazard, Do not expose

the main unit to moisture.

Caution

Do not drop or push objects into the television cabinet

slots or openings. Never spill any kind of liquid on the

television receiver.

Caution

Avoid exposing the main unit to direct sunlight and other

source of the heat. Do not stand the television receiver

directly on other produces which give off heat. E. g. video

cassette players, Audio amplifiers. Do not block the

ventilation holes in the back cover. Ventilation is essential

topreventfailure of electrical component. Do not squash

power supply cord under the main unit.

Caution

Never stand on, lean on, push suddenly the product

or its stand. You should pay special attention to

children.

Caution

Do not place the main unit on an unstable cart stand,

shelf or table. Serious injury to an individual, and

damage to the television, may result if it should fall.

Caution

Whentheproductis not used for an extended period

of time, it is advisable to disconnect the AC power

cord from the AC outlet.

Caution

The LCD panel used in this product is made of glass.

Therefore,itcan break when the product is dropped

or applied with impact. Be careful not to be injured

by broken glass pieces in case the LCD panel breaks.

Main unit description

Control Panel Button Function

TV Terminal Connections

1. HDMI input terminal.

2. VGA input terminal of simulation signal of PC.

3. SCART input terminal.

4. S-video input terminal.

5. Video input terminal.

6. AUDIO input terminal.

7. PC AUDIO terminal.

8. HEADPHONE output terminal.

9. ATV antenna/close circuit TV network port.

Power Input Configuration

AC POWER

VOL+ : Volume up.

VOL- : Volume down.

CH+ : TV channel up.

CH- : TV channel down.

MENU : Press to select the main menu.

TV/AV : Select the input signal.

POWER : Switch on when at standby mode or enter the standby mode.

Remote control

POWER: Power on/off button, press once to turn the TV on

and press again to turn the TV off.

MUTE: Press this button to mute or restore sound.

DVD SETUP: Press this button to enter the DVD main menu

and press again to exit the main menu.

(Used for models with DVD function only)

TITLE: Press this button to return the title menu.

(Used for models with DVD function only)

MENU(BLUE): Press this button to return the root menu or

exit the DVD main menu.

(Used for models with DVD function only)

USB/CR: Press to select the MEDIA signal source.

(Used for models with USB/CR function only)

NICAM/A2: In the TV condition, press this key to select the

stereo effects.

SLEEP: Set the sleep timer.

ASPECT: Press to select the different picture size.

EJECT : press to eject the DVD-disc in DVD mode.

(Used for models with DVD function only)

DISPLAY: Display TV information.

AUTO: Press to adjust the picture automatically in PC mode.

PMODE: Select picture mode.

SMODE: Select sound mode.

DTV: This button is not available.

SOURCE: Press to change signal source.

ENTER: Enter the selected option or perform the selected

operation.

MENU: Press this button to enter the main menu for various

optional adjustable setting.

EXIT: Exit the OSD (On-screen display).

0-9: Select and switch to a channel using 0 - 9.

-/--: Switch the program digit.

:Switch back and front between the current and previous

channels.

CHc/CHd: Change the channel up and down.

VOLc/VOLd: Adjust the volume.

TEXT: Press to enter the Teletext mode.

HOLD: Freeze a multi-page passage on screen in Teletext

mode.

INDEX: Press this button to go to the index page.

REVEAL: Press this button to reveal the hidden information

in Teletext page. Press again to hide the information.

SIZE: Display the top, bottom or all of page to read easily in

Teletext mode.

SUBPAGE: Carry out the function of SUBCODE in the text

while enter the text display mode.

PLAY/PAUSE ：Press to start playing the disc or Media,

or to pause playing.

(Used for models with DVD or USB/CR function only)

STOP ：Stop playing the disc or Media.

(Used for models with DVD or USB/CR function only)

REV ：Press to play backward.

(Used for models with DVD or USB/CR function only)

FWD ：Press to play forward.

(Used for models with DVD or USB/CR function only)

PREV : Skip to previous chapter

(Used for models with DVD or USB/CR function only)

NEXT ：Skip to next chapter

(Used for models with DVD or USB/CR function only)

ZOOMǖSelect the zoom picture.

(Used for models with DVD function only)

GOTOǖJump to the appointed chapter or title.

(Used for models with DVD function only)

SUBTITLE(BLUE)ǖSelect the disc caption.

(Used for models with DVD function only)

ANGLEǖSelect the angle.

(Used for models with DVD function only)

PROGRAMǖSelect the disc program.

(Used for models with DVD function)

INTROǖPress the button to display the time of chapter

remain or elapsed.

(Used for models with DVD function)

REPEATǖSelect the repeat mode.

(Used for models with DVD function)

ABǖSelect the segment to repeat.

(Used for models with DVD function)

RED, GREEN, YELLOW, BLUE: Correspond to the

different colored subjects.

(Used for models with european region function)

Indice

Lingue:

Manuali TV LCD popolari di altre marche

LG 32LC4R* Manuale utente

ViewSonic

ViewSonic N4200w-1 VS10945-1M Manuale utente

Salora

Salora 22LED1600 Manuale utente

Samsung

Samsung LA32E420 Guida

Dell

Dell W1900 19 Istruzioni utente

Samsung

Samsung LN40C670M1F Manuale utente

Samsung

Samsung Series 4+ Manuale utente

Samsung

Samsung 5 Series Manuale utente

Grundig

Grundig 40 VLE 8230 BP Manuale utente

Philips

Philips 43PFL4901/F7 Manuale utente

Sony

Sony Bravia XBR-43X830C Manuale utente

LG 32LS350 Manuale utente

VIORE

VIORE LED32VF60 Manuale utente

Toshiba

Toshiba Regza 42HL167 Manuale utente

JVC

JVC LT-32A220 Manuale utente

Philips

Philips 20TA1000/93 Manuale utente

Philips

Philips 32PFL3158T/12 Manuale utente

Sony

Sony Bravia KDL-V32XBR2 Manuale utente