LENCO MN-002 Manuale utente

MN-002

CD Music system

Please read and understand all the warnings provided below, as well as and those ma kedr

on the unit. This unit has been designed and manufactured to assure personal safety.

Only use power source that is specified

in the User Manual or on the system.

Keep the unit and power plug

away from water.

Avoid placing the unit in direct

or sunshine or near a heat source.

Never open the cover and avoid dropping

anything into the unit, such as coins,

hairpins and needles for example.

Do not bend or pull the power cable

excessively, and do not apply pressure

to it by standing on it.

Unplug the unit from the main power

outlet when you do not use it for a long

time.

WARNING

CONTENT

WARNING.........................................................................................................1

PANELS.............................................................................................................4

REMOTE CONTROL.......................................................................................5

AUX IN/ USB CONNECTION........................................................................7

BASIC OPERATION........................................................................................8

CD OPERATION.............................................................................................10

FM OPERATION............................................................................................11

AMPLIFIER CONNECTION...........................................................................6

TROUBLE SHOOTING/ SPECIFICATION...................................................12

8. Do not install near any heat sources such as radiators, heat Registers, stoves, or

other apparatus (including amplifiers)that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding -type plug. A

polarized plug has two blades with one wider than the other. A grounding prong.

The wide blade or the third prongs are provided for your safety. When the provided

plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manu-

facturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug the apparatus during lightning storms or when unused for long periods

of time.

14. Refer all serving to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture.

15. Please keep the unit in a good ventilation environment.

16. These servicing instructions are for use by qualified service personnel only. To

reduce the risk of electric shock, do not perform any servicing other than that

contained in the operating instructions unless you are qualified to do so.

17. WARNING: The MAINS PLUG is used as disconnect device, the disconnect

device shall remain readily operable.

IMPORTANT SAFETY INSTRUCTION

1. Read these Instructions - All the safety and operating instructions should be read

before this product is operated.

2. Keep these Instructions - The safety and operating instructions should be retained

for future reference.

3. Heed all Warnings-All warnings on the appliance and in the operating instructions

should be adhered to.

4. Follow all instructions - All operating and use instructions should be followed.

5. Do not use this apparatus near water- The appliance should not be used near water

or moisture - for example, in a wet basement or near a swimming pool, and the like.

6. Clean only with a damp cloth.

7. Do not block any of the ventilation openings. Install in accordance with the

manufacturer’s instructions.

18. This equipment is a Class II or double insulated electrical appliance. It has been

designed in such a way that it does not require a safety connection to electrical earth.

19.

-This lightning flash with arrowhead symbol within an equilateral

triangle is intended to alert the user to the presence of non-insulated

20.

21. The batteries in remote control shall not be exposed or excessive heat such as

sunshine, fire or the like.

22. The apparatus shall not be exposed to dripping or slashing and that no objects

filled with liquids, such as vases, shall be placed on the apparatus.

23. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or

moisture.

24. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.

25.

dangerous voltage within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock.

- Warning: To reduce the risk of electric shock, do not remove cover (or back) as

there are no user-serviceable parts inside. Refer servicing to qualified personnel.

- The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance in the literature

accompanying the appliance.

Invisible laser radiation when open and interlocks defeated.

Avoid exposure to beam of laser.

Correct Disposal of this product. This marking indicates that this product

should not be disposed with other household wastes throughout the EU.

To prevent possible harm to the environment or human health from uncontrolled

waste disposal, recycle it responsibly to promote the sustainable reuse of material

resources. To return your used device, please use the return and collection systems

or contact the retailer where the product was purchased. They can take this product

for environmental safe recycling.

This product complies with the European Commission on the Eco-design Directive

and its implementing Regulations- Energy related products. 15 minutes (approx.)

later without any input (expect in FM mode), the system will automatically enter

standby mode. Follow up the instruction manual to assume the function operation.

ERP II note (Energy Related Products)

ACCESSORIES

Part 4: User ManualPart 1: Audio cable Part 2: FM Antenna Part 3: Remote Control

USER MANUAL

PROGRAM

DSP

USB

FREQ.

RDS/

CD RIP.

TIME

PANELS

DISPLAY SCREEN

INDICATOR LIGHT

STANDBY

PLAY/PAUSE

FAST REWIND

USB PORT

DISC TRAY

STOP

TONE

FAST FORWARD

IR SENSOR

EJECT/OPEN/CLOSE

DSP

VOLUME KNOB

PANEL LED LIGHT

FM ANTENNA

POWER SWITCH

L/R SPEAKERS

POWER SUPPLY

EARPHONE PORT

FUNCTION

R/L AUX IN SOCKETS

L/R AUDIO OUTPUT

EARPHONE

STANDBY

USB

EJECT/OPEN/CLOSE

AUX

REPEAT

PROGRAM

NUMBER BUTTONS

MUTE

VOLUME+/-

ENTER

FAST FORWARD

STOP

PLAY/PAUSE

MONO/STEREO

TUNE- TUNE+

FAST REWIND

P.LED

CHANNEL+

CHANNEL-

CD FM

AUX

USB

345

678

9 0

REPEAT

REP.AB CD RIP.

PROGRAM

P.LED

ENTER

CH+

CH-

VOL-

SEARCH SAVE MO/ST

DSP

BASS+

TREBLE+

BASS-

TREBLE-

RANDOM

TU- TU+

VOL+

RDS/ CD RIPPING

REPEAT A-B

DSP

RANDOM

TREBLE+/-

BASS+/-

TIME

SAVE

1. Turn on the unit, insert the batteries into the remote control, and direct the remote

control at the remote sensor on the front panel.

2. The distance of the remote control should not exceed 7 meters, or it will not work.

3. If the remote control sensor or IR-radiator is closed, the remote control will not

operate or there will be interference in the way that it would normally function.

4. Interference from other electronic devices that generate high frequency signals can

strongly influence the way that the remote control functions.

REMOTE CONTROL

TIME

FREQ.

FREQUENCY

RDS/

Left channel Right channel

Amplifier

FM Antenna

CONNECTION WITH AMPLIFIER

1. Connect the unit with the amplifier via the audio cable to enjoy a more vivid music

2. Pay attention to the picture below. Each connection must be safe and firm.

3. Disconnect power cables until you have finished all the connections.

SPEAKERS CONNECTION

Disconnect power cables until you have finished all the connections.

Right Speaker Left Speaker

→

entertainment.

1. You can enjoy music via other audio devices or USB stick.

2. Pay attention to the picture below for each connection must be safe and firm.

AUX IN/ USB CONNECTION

EARPHONE

RCA cable

USB stick

AUX IN operation

1. Press AUX button on remote control or FUNCTION button on the front panel to enter

AUX IN mode.

2. Connect the other music device (e.g. computer) with the CD unit via the RCA cable.

3. Once connected to aux in sockets, only the volume control is available on the unit.

USB operation

1. Insert the USB stick to the USB port on the front panel of the unit.

2. Press USB button on remote control or FUNCTION button on the front panel to enter

USB mode.

3. The unit will automatically detect the USB stick and start playing if there is music

stored.

4. Please refer to BASIC OPERATION for more details.

Note:

1. Depending on the amount of data and media speed, it may take long for the unit to

read the contents of media device. In some cased, reading time may be as long as 60s.

This is not a malfunction.

2. Even when the files are in a supported format, some may not play or display depending

on the compatibility.

3. The file format that this unit can play is Mp3 with extended name “.mp3".

Earphone

Preparation

1. Before the unit is turned on, please check if all the connections are right and safely

made. Insert the plug in the corresponding power socket.

2. Press the POWER ON/OFF button on the rear panel of this unit.

3. Move the disc cover out by pressing the EJECT button on the remote control (or on

the front panel). Put the disc on the disc holder and press the EJECT button again. The

player will start loading the disc and playing the disc automatically.

Standby mode

Press the STANDBY button on the remote control or on front panel to switch on or to

standby mode. Note: Make sure that the unit is connected to the power source.

Select modes

1) Press the CD, USB, FM, AUX buttons on the remote control to enter the related mode.

2) Correctly connect the audio facility (e.g. PC) with this unit, then press the AUX button

on the remote control to enjoy the outer audio input sources function.

3) You can also press the FUNCTION button repeatedly on the front panel to select the

corresponding mode.

Number buttons

1. While playing audio files (e.g. CD), press the Number buttons to select tracks.

E.g. If the number of the track consists of two digits, like 25, press the 2 button first

and then press 5 to select the 25th track.

2. When in FM mode, press the Number buttons to select stations or frequency. Please

refer to FM operation.

Volume setting

Press the VOL+/VOL- buttons on the remote control or rotate the volume knob on the

front panel to adjust the volume to a comfortable level.

Mute button

If you press the MUTE button while playing, the sound signal will not be heard, while

music is still playing. Press MUTE button again or press VOL+/- buttons to resume the

previous volume level.

Previous and next

Briefly press the 9 (PREVIOUS) or the : (NEXT) button to skip to previous or the

next song.

BASIC OPERATION

Fast Forward and Rewind

While playing tracks, press the 8 or 7button to fast forward or fast rewind by speed X1

(press once), or speed X2 (press twice), press the third time to resume the normal speed.

P.LED

Press P.LED button on the remote control to turn off or on the panel LED light.

Random

Press RANDOM button on the remote control to play the tracks in a random order.

Press again to cancel and resume the normal playback order.

Repeat A-B

While in playing mode, press the REP. AB button on the remote control to set the section

for repeating.

1. Press the REP.AB button once at the beginning of the section (A).

2. Press the REP.AB button at the end of the section (B). Then it will automatically repeat

section A-B.

3. Press again to exit.

BASIC OPERATION

Press the ENTER button to enable the selected items.

Play/Pause

While playing a track, press the PLAY/PAUSE button to pause the playback, press

again to resume playback.

Stop

In playing mode, press the STOP button to stop playback, press PLAY/PAUSE button

to start playing from the beginning.

Tone

In any modes, you can adjust bass and treble.

1. Press TONE button on the front panel to select bass or treble, then rotate VOLUME

KNOB from low to high to adjust the effect of bass or treble.

2. Press BASS+/-, TREBLE+/- buttons on the remote control to adjust directly.

DSP

Press the DSP button to select the different sound fields: Jazz, Rock, Classic, Pop, Live,

Dance and off.

Enter

Repeat

While in playing mode, press the REPEAT button to set repeat mode.

For CD, CD-R disc, press the REPEAT button to repeat playing songs.

1. Press once to repeat current track, you will see the “ ”on the display screen.

2. Press again to repeat all tracks, you will see the “ALL ” on the display screen.

3. Press the third time to cancel.

Indice

Manuali Impianto stereo popolari di altre marche

LG CM3330B Manuale utente

Sony

Sony SS-CEP50 Manuale utente

Cetacea Sound

Cetacea Sound CVS-II Manuale utente

Aiwa

Aiwa XR-H66MD Manuale utente

Denon

Denon UCD-250 Manuale utente

Sanyo

Sanyo DC-MX41i Manuale utente

Sharp

Sharp CD-ES600V Manuale utente

Exibel

Exibel BDX600-UK Manuale utente

Sanyo

Sanyo DC-F320 Manuale utente

Philips

Philips FWM583X Manuale utente

Sharp

Sharp CD-C462 Manuale utente

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuale utente

Aiwa

Aiwa XR-EM70 Manuale utente

Cyrus

Cyrus Lyric Manuale utente

Philips

Philips MCM159/98 Manuale utente

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuale utente

RCA

RCA RS3965SB Manuale utente

Sharp

Sharp XL-UH240 Manuale utente