Letscom DL-1 Manuale utente
Thank you for purchasing our products. This manual addresses the safety
guidelines, warranty and operating instructions. Please review this manual
thoroughly before operating your device.
DL-1
User Manual
Package Contents................................................1
Introduction..........................................................1
1. ABOUT THE CAMERA..............................................................1
2. APPLICATIONS.........................................................................2
At a Glance...........................................................2
Installing the Batteries and Micro SD Card.......5
1. LOADING BATTERIES.............................................................5
2. INSERTING THE MICRO SD CARD........................................6
Using the Camera................................................7
The OFF, ON, and SETUP Modes.......................7
1. OFF MODE...............................................................................7
2. ON MODE.................................................................................7
3. SETUP MODE..........................................................................8
4. PLAYBACK ON THE CAMERA SCREEN................................8
Advanced Settings..............................................9
Mounting and Positioning the Camera............13
1. MOUNTING.............................................................................13
2. SENSING ANGLE AND DISTANCE TEST..............................14
3. SWITCHING ON THE CAMERA.............................................14
Review Photos or Videos..................................15
Connect Camera to TV
......................................
15
Specifications...................................................16
Frequently Asked Questions ..........................16
1. Battery life is shorter than expected......................................16
2. Camera stops taking images or won't take images................17
3. Still photo and/or video qualify problems
................................
17
1). Night photos or videos appear too dark
.............................
17
2). Night photos or videos appear too bright
...........................
18
3). Daytime photos or videos appear too bright
.......................
18
4). Photos with streaked subject
.............................................
18
5). Red, green or blue color cast............................................18
6). Short video clips—not recording to the length set.............18
4. Camera won't retain settings
.................................................
18
5. Micro SD card is hard to install
...............................................
18
SAFETY AND WARRANTY
................................
19
Important Safety Instructions
......................................................
19
Warranty.....................................................................................20
1 × Trail Camera
1 × USB Cable
1 × Mounting Strap
1 × Threaded Tripod
1 × Mounting Plate
3 × Screws
1 × User Manual
Note:
Micro SD card and batteries are NOT included in the package. Micro
SD card (Class 6 or higher up to 32GB) is recommended.
1. ABOUT THE CAMERA
The camera is a digital scouting camera, it can be triggered by any
movement of game in a location, detected by a highly sensitive Passive
Infra-Red (PIR) motion sensor, and then take high quality pictures (up
to 14MP still photos), or video clips. The camera consumes very little
power (less than 0.15mA) in a stand-by (surveillance) state. This means
it can deliver up to six months standby operation time when the device
is powered by eight AA alkaline batteries. Once motion in the monitored
area is detected, the digital camera unit will be triggered at once
(approx. 0.4 second) and then automatically take photos or videos
according to previously programmed settings. The camera is equipped
with built-in infrared LEDs that function as a flash, so that it delivers
clear photos or videos (in black & white) even in the dark, and it can
take color photos or videos under sufficient daylight. The camera is
designed for outdoor use and is resistant against water and snow.
Package Contents
Introduction
- 1 -
2. APPLICATIONS
The camera can be used as follows:
videos of wild animals
community
Front View
At a Glance
- 2 -
IR LEDs
LED Indicators
Center PIR
Motion Sensor
Lens
Lock Hole
AV ON-SETUP-OFF
Keypad Battery Slot
LCD Screen
Inside View
- 3 -
Replay Key
Keypad and Shortcut
MENU
REPLAY OK
SHOT
MENU
REPLAY OK
SHOT
Right Key
Left Key
Menu Key
Down Key ON-SETUP-OFF
Up Key
Shot Key
OK Key
Up Key for Video Mode/Option Up in Menu Mode/Next Photo/Video
in Replay Mode
Right Key
Down Key for Camera Mode/Option Down in Menu Mode/Previous
Photo/Video in Replay Mode
Left Key
Menu Key for Menu Entering/Exit
Shot Key for Video Recording/Photo Shooting
OK Key for Confirmation and Video Playing/Stopping in Replay Mode
Replay Key for Photo/Video Reviewing
ON, SETUP and OFF Operating Modes
Note:
All keys (exclude the ON, SETUP and OFF switch) work only in SETUP
Mode.
Back View
Lock Buckle
Strap Hole
- 4 -
Before using your camera, you need to install a set of batteries and
insert a Micro SD card. There are some important notes about both
batteries and Micro SD cards you should be aware of, so please take
the time to read the following directions and cautions:
1. LOADING BATTERIES
After opening the cover of the battery slot, you will see that the camera
has eight battery slots. A full set of four or eight batteries must be
installed for the camera to operate. Please ensure that you have
inserted batteries in the correct orientation.
We recommend using eight new alkaline AA batteries.
Note:
If you install four batteries, make sure to place them all in the first half of
the battery compartment or the second half of the battery compartment.
The four batteries are not allowed to put in the first half and second half
of the battery compartment separately.
Installing the Batteries and Micro SD Card
Bottom View
- 5 -
Micro SD Card Slot
AV Port
Micro USB Port
DC Port
Tripod Screw Nut
6V 15A
In SETUP mode when battery power level gets low, the message
"Low Battery" will show on the screen, please replace the batteries.
2. INSERTING THE MICRO SD CARD
Note:
We recommend using a good quality name brand Micro SD card
with C6 (or higher) speed.
Insert the Micro SD card (with the camera's power switch in the OFF
position) before beginning to operate the camera. Don't insert or
remove the Micro SD card when the power switch is in the ON
position.
The camera uses a standard Micro SD memory card to save photos
(in .jpg format) and/or videos (in .avi format). Micro SD cards up to a
maximum 32GB capacity are supported.
Inserting the Micro SD Card
A "click" sound indicates that the card is installed successfully. If the
Micro SD card is not installed correctly, the device will not display an
SD card icon on the LCD in SETUP mode.
memory card" before using it for the first time, especially when a card
has been used in other devices.
will pop outward.. The card is released from the slot and ready to be
removed when you hear the click.
removing Micro SD cards or batteries.
- 6 -
Note:
Please remove the plastic protective films from the camera lens and
PIR motion sensors before use.
Once you've prepared your camera by properly installing batteries
and a Micro SD card, you could simply take it outside, strap it to a
tree (or not-according to your application scenario), switch it ON and
leave. We highly recommend that you first spend some with this
manual so that you know a bit about setting up your camera.
The camera has three basic operational modes:
OFF mode: Power switch in the OFF position.
ON mode: Power switch in the ON position (LCD screen is off.)
SETUP mode: Power switch in the SETUP position (LCD screen
is on).
1. OFF MODE
The OFF mode is the "safe" mode when any actions must be
taken, e.g., replacing the Micro SD card or batteries, or
transporting the device. You will also use OFF mode (ON or
SETUP is available) if you connect the camera to a computer's
USB port later to download your photos/videos. And of course,
when you are storing or not using the camera, you will switch it to
OFF. Please note that in OFF mode the camera consumes little
power. It's a good idea to take the batteries out of the battery
compartment if the camera will not be used for an extended period
time.
2. ON MODE
After installing the batteries and Micro SD card, you can switch on
the camera. When the power switch is moved to the left position,
the camera will enter into ON (Live) mode. Once in the ON mode,
no manual controls are needed or possible (the control keys have
no effect). The camera will take photos or videos automatically as
it is programmed when the PIR sensors detect movement in
range.
Using the Camera
The OFF, ON, and SETUP Modes
- 7 -
Indice
