Level LIS2010-MT-1800/11 Manuale utente
MODEL:LIS2010-MT-1800/11
GUANGDONG LEVEL INTELLIGENT LOCK INDUSTRIAL CO.,LTD
CONTACT US
Address:No.I Pingxi Industrial Park,PingZhou,Nanhai,Foshan,Guangdong,China
E-mail:info@levellock.com
Web:www.levellock.com
USER GUIDE
KEYPAD FINGERPRINT LOCK
LIS2010-MT-1800/11
KEYPAD FINGERPRINT LOCK
CONTENTS
Chapter 4 Maintenance
4.1. Batteries Replacement
4.2. Daily maintenance
4.3. Trouble Shooting
Chapter 1 Product Introduction 01-05 Chapter 3 Operations 15-24
25-26
1.1. Lock Model and Shape
1.3. Lock Components
1.2. Basic Functions
1.4 . Lock body dimensions
1.5 . Mortise dimensions
1.6 .Exploded diagram
Chapter 2 Installation of lock 06-14
2.1. Installation Requirement
2.2. Lock Direction
2.3. Installation Steps
3.4.1. Operation of setting master fingerprint
3.4.2.Operation of setting other fingerprints with master fingerprint
3.4.3.Operation of setting code with master fingerprint
3.4.4. Operation of deleting fingerprint with master fingerprint
3.4.5. Operation of deleting code with master fingerprint
3.5. Code Setting
3.6. Code Resetting
3.7. Unlock with Fingerprint
3.8. Unlock with Code
3.9.Deletion of One code
3.10. Deletion of One Fingerprint
3.11. System Initialization
3.12. Passage Mode
3.13. System Self-locked Function
3.14. Low battery alarm and external power supply
3.4 .Master Fingerprint
3.1. Finger placement
3.2. Light and Sound Prompt
3.3. Fingerprint Enrollment
Chapter 1 Product Introduction
Product Model
LIS2010-MT-1800/11
Finishing
CCR, PVD
Net Weight
2.76kg
1.1 Lock Model and Shape
1.2 Basic Functions
A perfect combination of Mechanical & Electrical Integration and biometric technology.
3 unlocking ways: fingerprint, code and mechanical key.
International standard mortise, flexible using and good expansiveness.
Reversible handle design, either left or right direction to open.
Large capacity, 100pcs fingerprints can be enrolled, and two groups of codes can be set.
Can delete certain fingerprint separately.
Low power waste: 4 alkaline batteries for power supply, 20000 times unlocking.
Low voltage alarm: when battery voltage is low, use finger or code to open, beeps warning sounded to remind for battery
replacement.In this case still will be opened 100 times
Extra power supply: in case of low voltage, standard port is provided for 9V handy battery.
Passage mode: easily set the lock to passage mode for conference purpose.
Self-lock function: when wrong fingers and code was input for 10 times, fingerprint reader # will be locked for a certain period and
With light, sound and LED indication for easy operation.
1
2
3
4
5
6
7
8
9
10
11
12
01
03
02
Chapter 1 Product Introduction Chapter 1 Product Introduction
1.3 Lock Components
BACK ELEVATION BACK ELEVATION
Battery box cover
Back panel
No.11 handle
SIDE ELEVATION
Anti-attrition latch Latch
FRONT ELEVATION
Latch
Digital display
Fingerprint window
Front panel
Keypad
Single-latch mortise (for 60/70)
No.11 handle
Anti-attrition latch
Set
Switch
1.4 Lock body dimensions
FRONT ELEVATION
05
04
Chapter 1 Product Introduction Chapter 1 Product Introduction
battery box cover
Door
Back lock panel
battery box
face plate Mortise
front lock panel
Cylinder
1.6 Exploded diagram
single-latch mortise(for 60)
single-latch mortise(for 70)
1.5 Mortise dimensions
08
Chapter 2 Installation of lockChapter 2 Installation of lock
2.1 Installation Requirement
Door Substance: wooden door and steel burglarproof door (Steel door, the hold should be cut by door supplier.)
Door thickness: 35-55mm
If the door is decorated, the dimension between the door edge and decoration should be at least 100mm.
2.2 Lock Direction
Left handle door
INSIDE OPEN DOOR
Right handle door
Scaling3:1Scaling3:1
move leftwards
move rightwards
Minimal 100mm between the
door edge and decoration
Minimal 110mm between the
door edge and decoration
Door
thickness:
35-55mm
Door
thickness:
35-55mm
07
When standing outside the room and facing the door, the hinge is on the left hand side.
Left-handle
Right handle
When standing outside the room and facing the door, the hinge is on the right hand side.
Inside open When standing outside the room and facing the door, one has to push forward to open the door.
Outside open
When standing outside the room and facing the door, one has to pull out to open the door.
Left handle door
OUTSIDE OPEN DOOR
Right handle door
Scaling3:1Scaling3:1
Chapter 2 Installation of lockChapter 2 Installation of lock
2.3 Installation Steps
2.3.1. Hole-making
Drill and cut the hole according to the installation drawings or hole-making templates to locate the
mortise and lock body. It's recommended to locate the handle center line 100cm from the ground.
door
datum line
hole-making template
Distance between
handle and ground
shall be 1000mm.
Mortise
template
strike plate template
three central lines should be in one
09
08
hole-making chart for door
hole-making chart for strike
box and strike plate.
Chapter 2 Installation of lockChapter 2 Installation of lock
Install the lock following (1) to (7).
STEP 2 Install the lock panels
(7)
head screw
35mm Philips
60/70 single-latch mortise
(6)back panel
(5)rubber pad
(3)square shaft
(1)front panel
(2)rubber pad
Door
Square shaft should be
inserted into this Square
Hole completely
Warning
(4)Connect these two pin
11
10
2.3.2. Lock Installation.
(3)square shaft
(1)Single-latch Mortise (60/70)
(2)
single-latch mortise
Hole for installing
Plan view of Single-latch Mortise (60/70)
move leftwards move rightwards
Install 60/70 single-latch mortise
based on the left fig.
STEP 1 Install the mortise
When single-latch mortise is 60
or 70mm, the position of mortise
square hole for installing Square
Shaft is different (Refer to Fig
“Plan view of 60/70 single-latch
mortise”).
Note:
Chapter 2 Installation of lockChapter 2 Installation of lock
Fig1: To set Passage Mode, turn mechanical key 72° lockwise. In this
case, the lock can be opened by turning handle directly outside door.
Fig2: Turn mechanical key 72° counter-clockwise to key's initial
position, pull out the key and install No.11 Handle.
Fig2 Fig1
Mechanical key
A
No.11 Handle
M5 screw
2.5 Allen key
Insert 2.5 Allen key into Locating hole
could help to fix Back handle head
and release your hand for installing
screws.
Note:
Fig :
install 2pcs 55mm Philips head screws.
3 Turn Front handle, back handle head turns correspondingly, two screw holes exposed, and
Put in batteries and install battery box cover.
Fig3
AA alkaline batteries
Battery box cover
2.5 Allen key
Back handle head
Locating hole
Screw hole
Turn 72° clockwise
Turn 72°
counter-clockwise
B
A
B
13
12
STEP3 Set passage mode, install screws to fix lock body and put in batteries.
Chapter 3 Operations
Chapter 2 Installation of lock
Turn 55°
counter-clockwise
STEP 4 Cancel Passage Mode
Turn mechanical key 55° counter-clockwise, Passage Mode is cancelled. Turn
mechanical key 55° clockwise to return to its initial position, pull out the key. In this
case, front handle will be in free-moving state.
Cancel Passage Mode
Install strike plate and strike box
STEP 5
Put strike box and strike plate into
door frame, fix them with 2 screws.
14
Indice
