LevelOne FPS-9021 Manuale utente

LevelOne Printer Server Series

FPS-9021/FPS-9022/WPS-9121/WPS-9122

Wired/Wireless Mini Printer Server w/Parallel (USB 2.0) Port

Quick Installation Guide

English

Deutsch

Português

Español

Dansk

繁體中文

한국어

Русский

ภาษาไทย

ﻲﺑﺮﻋ

This guide covers only the most common situations. All detail information is described in

the user’s manual

Figure(1-1)

Figure(1-2) Figure(1-3)

Figure (1-4) Figure (1-5)

Figure(1-6) Figure(1-7)

Figure(1-8) Figure(1-9)

Figure (1-10) Figure (1-11)

Figure (2-1)

Figure(2-2) Figure(2-3)

Figure(2-4) Figure(2-5)

Figure(2-6) Figure(2-7)

Figure(3-1) Figure(3-2)

Figure(3-3) Figure(3-4)

Figure (3-5) Figure (3-6)

Figure (3-7)

English

1.1 Hardware Installation Procedure

1. Unpack the printer server package and verify that all the items listed on the sleeve are

provided.

2 Connect the printer server to the printer you want to share on the network.

3 Connect the printer server to your network by attached the network cable to the UTP port

of the printer server.

4. Connect the power adapter to the printer server. The printer server will perform the

Power-On-Self-Test (POST) after it is powered on. During the POST, the Status and

Ready LEDs will be on. When the LEDs are unlighted, the printer server is ready.

Note: You must use the power adapter shipped along with the printer server, do NOT

use any other power adapter from other sources.

1.2 Software Installation Procedure

1. Insert the printer server CD into your CD-ROM drive. The Autorun.exe program should be

executed automatically. If not, run Autorun.exe manually from CD-ROM drive’s root

directory.

2. The “Installation Manager” will be displayed on the screen as following. Select model then

click “Administrator Installation” (Figure 1-1)

3. The “Utilities Setup” window will be displayed. Click “Next” (Figure 1-2)

4. Click “Next” to install the utilities in the default folder or click “Browse” to specify the

destination folder where you would like to install the utilities (Figure 1-3)

5. Select the components you want to install. It is highly recommended to install all provided

components. Click “Next” to continue (Figure 1-4)

6. Specify the program folder where the program icons will be added to, click “Next”

(Figure 1-5)

7. The system will start to install the utilities automatically (Figure 1-6)

8. You have completed the installation phase and prepare to configure the Printer Server.

The “Choose Printer Server” will list all Printer Servers within the network. Select the

Printer Server you would like to configure and click “Next” (Figure 1-7)

NOTE 1: If this is the first time you configure the Printer Server, the “Printer Server Name” is

the last 6-digit of MAC ID with prefix “PS”. Please check the MAC ID on the printer

server.

NOTE 2: The list can only display the devices from the same manufacturer.

9. Specify a recognizable name for the Printer Server and click “Next” (Figure 1-8)

10. Specify the IP Address for the Printer Server manually or click “Next” to keep default IP

Address, i.e. 192.168.2.2. (Figure 1-9)

11. The configuration summary is displayed in the window. Now, you have completed the

“Printer Server Setup”. Click “Finish” and your system will add network port of the Printer

Server to your PC automatically. (Figure 1-10)

12. The Administrator Installation procedure is totally completed. Click “Finish” (Figure 1-11)

2.1 Client Installation and Setup

1. Insert the printer server CD into your CD-ROM drive. The Autorun.exe program should be

executed automatically. If not, run Autorun.exe manually from CD-ROM drive’s root

directory.

2. The "Installation Manager" will be displayed on the screen as follows. Select model then

click “Client Installation” (Figure 2-1)

3. The “Utilities Setup” window will be displayed. Click “Next” (Figure 2-2)

4. Click “Next” to install the utilities in the default folder or click “Browse” to specify the

destination folder where you would like to install the utilities. (Figure 2-3)

5. Specify the program folder where the program icons will be added to, click “Next”

(Figure 2-4)

6. The system will start to install the utilities automatically (Figure 2-5)

7. Now, the installation procedure is completed, you are ready to set up the client’s computer.

All network ports of the Printer Servers detected on the network will be added to your PC

automatically, click “Continue” (Figure 2-6)

8. The Client Installation procedure is completed. Click “Finish” (Figure 2-7)

3.1 Windows Add Printer Procedure

After adding a “Network Port” of the printer server to your PC by Administrator or Client

Installation Program, you can follow the procedure described below to add printer to the

Windows. Note that following “Add Printer” steps are running in Windows XP, the steps in other

Operating Systems are similar.

Step1. Click “Start”, choose “Settings” and select “Printers and Faxes”

Step2. Click “Add a Printer”

Step3. The “Add Printer Wizard” is displayed. Click “Next” (Figure 3-1)

Step4. Select “Local printer attached to this computer” and make sure that “Automatically

detect and install my Plug and Play printer” is not selected. Click “Next” (Figure 3-2)

Step5. Choose the suitable “Printer Server Network Port” which was created by the

Administrator Installation or Client Installation process and click “Next” (Figure 3-3)

Step6. Select a suitable printer manufacturer and the printer model and click “Next”. If your

printer is not in the list, click “Have Disk…” to install the driver of the printer. After

installation, the printer model will be added to the list (Figure 3-4)

Step7. Name your printer and setup the default printer, click “Next” (Figure 3-5)

Step8. Choose to print the test page or not. It is recommended to print a test page. Click

“Next” (Figure 3-6)

Step9. You have added the printer to the PC successfully. The information of the printer is

displayed in the windows. Click “Finish” (Figure 3-7)

Now you can start to print from your PC to the printer server

Deutsch

1.1 Hardware Installation

1. Packen sie den Printer Server aus und prüfen Sie, ob das auf dem Umkarton angegebene

Zubehör vollständig vorhanden ist.

2. Verbinden Sie den Printer Server mit dem Drucker, den sie im Netzwerk bereitstellen

möchten.

3. Verbinden Sie den Printer Server mit dem Netzwerk mit dem beigelegten Netzwerkkabel

mit dem UTP Port des Printer Servers.

4. Verbinden Sie das Netzteil mit dem Printer Server. Der Printer Server wird einen Selbsttest

(POST) durchführen, nachdem er eingeschaltet wurde. Während des POST sind die

Status und Ready LEDs an. Wenn die LEDs erlöschen, ist der Printer Server bereit.

Anmerkung: Sie müssen das mitgelieferte Netzteil benutzen, benutzen Sie KEINEN

andere Stromversorgung aus anderen Stromquellen.

1.2 Software Installation

1. Legen Sie die Printer Server CD in ihr CD-ROM Laufwerk. Das Autorun.exe Programm

sollte automatisch starten. Wenn nicht, führen Sie Autorun.exe manuell von der CD aus.

2. Der “Installation Manager” wird wie folgt auf dem Bildschirm angezeigt. Klicken Sie

“Administrator Installation” (Figure 1-1)

3. Das “Utilities Setup” Fenster wird nun angezeigt. Klicken Sie “Next” (Figure 1-2)

4. Klicken Sie “Next” um die Utilites in den vorgegebenen Ordner zu installieren, klicken Sie

“Browse”, um den Zielordner auszuwählen. (Figure 1-3)

5. Wählen Sie die Komponenten, die sie installieren wollen. Es wird empfohlen alle

Komponenten zu installieren. Klicken Sie „Next“ zum fortfahren (Figure 1-4)

Altri manuali per FPS-9021

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali LevelOne Server di stampa

LevelOne

LevelOne FPS-2111TXU Manuale utente

LevelOne

LevelOne FPS-1031 Manuale utente

LevelOne

LevelOne EPS-3001TU Manuale utente

LevelOne

LevelOne FUS-3101 Manuale utente

LevelOne

LevelOne FPS-9023 Manuale utente

LevelOne

LevelOne EPS-3001TU Manuale utente

LevelOne

LevelOne WPS-0104 Manuale utente

LevelOne

LevelOne WPS-0100 Manuale utente

LevelOne

LevelOne FPS-1033 Manuale utente

LevelOne

LevelOne FPS-1031 Manuale utente

LevelOne

LevelOne FPS-1033 Manuale utente

LevelOne

LevelOne FPS-1032 Manuale utente

LevelOne

LevelOne WPS-1133 Manuale utente

LevelOne

LevelOne WPS-9123 Manuale utente

LevelOne

LevelOne WPS-1133 Manuale utente

LevelOne

LevelOne FPS-1031 Manuale utente

LevelOne

LevelOne WPS-9121 Manuale utente

LevelOne

LevelOne FPS-2112 Manuale utente

LevelOne

LevelOne FPS-9021 Manuale utente

LevelOne

LevelOne TROY 200 Manuale utente

Manuali Server di stampa popolari di altre marche

Digitus

Digitus DN-13003-1 Manuale utente

Edimax

Edimax PS-1206PWg Manuale utente

Intellinet

Intellinet 509077 Manuale utente

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Manuale utente

Buffalo

Buffalo LPV4-U2-300S Manuale utente

Zonet

Zonet ZPS1000 Manuale utente

TRENDnet

TRENDnet TEW-P11G Manuale utente

Axis

Axis 140 BJC Manuale utente

HP Jetdirect 280m - 802.11b Wireless Print... Manuale utente

MicroNet

MicroNet SP766W Manuale utente

NETGEAR

NETGEAR PS104 - Hub - EN Manuale utente

Axis

Axis AXIS 1610 Manuale utente

Buffalo

Buffalo LPV4-U2-300S Manuale utente

Axis

Axis 5600+ Manuale utente

NETGEAR

NETGEAR PS105 Manuale utente

Xerox

Xerox FreeFlow Print Server V9 SP3 Manuale utente

SEH

SEH primos Manuale utente

D-Link

D-Link DP-101P+ Manuale utente