Leviton AEHTK Manuale utente

Home Theater Interface Plate

Cat. No.

AEHTK

INSTALLATION INSTRUCTION

DI-000-AEHTK-00A

Left Front Right Front

Surround Left Surround Right

Surround Back Left

6.1/7.1 Surround Connections

Center

Subwoofer

Surround Back Right

7.1 Surround Connections

5.1 Surround Connections

This page to be printed as Blank

OVERVIEW

The Leviton Home Theater Wallplate provides a convenient

method of terminating in-wall speaker wires to installed speakers

and cables from ampliﬁer speaker outputs. The wallplate also

provides for the connection of up to two subwoofers and has two

QuickPorts that can be used for any of the full line of QuickPort

jacks.

INSTALLATION

TO PREWIRE:

1. Install a three-gang low-voltage ring at ampliﬁer location and

a single-gang low-voltage ring at each speaker location (if

speaker bracket requires it).

2. Run a minimum of 16/2 Class 3 speaker wire from Home

Theater Wallplate location to each satellite speaker.

Minimum Gauge Lengths are as follows:

WIRE LENGTH RECOMMENDED SIZE

Up to 50 feet (15 m) 18-gauge

50-150 feet (15-45 m) 16-gauge

Over 150 feet (45 m) 14-gauge

NOTE: The smaller the wire gauge number is, the thicker the

wire is.

3. Run a RG6 quad shielded coax cable from the Home Theater

Wallplate location to each subwoofer location.

TO TRIM-OUT:

1. Connect each speaker cable to the screw terminal connector

on the back of the Home Theater Wallplate that corresponds

to the speaker’s location in the room.

2. Terminate the end of the coax cable at the Home Theater

Wallplate with a Leviton RCA compression connector (p/n

40985-CR*) and plug it into one of the RCA connectors in the

wallplate.

3. At subwoofer location, use a single port QuickPort wallplate

(p/n 40701-BW) and a compression RCA QuickPort Jack

(p/n 40782-REW) to complete connection for subwoofer.

4. Connect ampliﬁer speaker outputs to corresponding spring

post connectors on the Home Theater Wallplate by stripping

approximately one inch of insulation from the speaker wire.

Push in on the spring post until the holes in the post line up

and insert bare portion of wire through the hole and release

spring post. Spring pressure will maintain contact on the

speaker wire.

NOTE: It is not necessary to use all of the connections on the

wallplate. If the system is a 5.1 surround style system, then

only those connections on the wallplate for left front, center,

right front, surround left and surround right, are used.

NOTE: For a 6.1 surround system, the connection labeled

“Surround Back Left” is added for the rear center speaker. To

connect a 7.1 surround system, use all of the spring post

connectors.

5. If the source ampliﬁer has an LFE (Low Frequency Effects)

connection, use an RCA cable to connect it to the RCA jack in

the Home Theater Wallplate the subwoofer is connected to.

Otherwise, use the subwoofer output (refer to the owners

manual for the ampliﬁer being used) for this connection.

6. Use an RCA patch cord to connect the subwoofer to the wall

plate at the subwoofer location.

WIRING DIAGRAM EXAMPLE

Left Front Right Front

Surround Left Surround Right

Surround Back Left

6.1/7.1 Surround Connections

Center

Subwoofer

Surround Back Right

7.1 Surround Connections

5.1 Surround Connections

Left Front Center Right Front

Surround Left Surround Right

5.1 Surround Amplifier

Front View

WIRING DIAGRAM EXAMPLE

Rear View

Left Front

Right Front

Center

Surround

Left

Surround

Right

Surround

Back

Left

Surround

Back

Right

Left Front

Right Front

Surround

Left

Surround

Right

Surround

Back

Left

Center

Surround

Back

Right

This page to be printed as Blank

For additional information, contact Leviton’s Techline at

1-800-824-3005 or visit Leviton’s website at www.leviton.com

LIMITED 5 YEAR WARRANTY AND EXCLUSIONS

Leviton warrants to the original consumer purchaser and not for the beneﬁt of anyone

else that this product at the time of its sale by Leviton is free of defects in materials

and workmanship under normal and proper use for ﬁve years from the purchase date.

Leviton’s only obligation is to correct such defects by repair or replacement, at its

option, if within such ﬁve year period the product is returned prepaid, with proof of

purchase date, and a description of the problem to Leviton Manufacturing Co., Inc.,

Att: Quality Assurance Department, 59-25 Little Neck Parkway, Little Neck, New

York 11362-2591. This warranty excludes and there is disclaimed liability for labor for

removal of this product or reinstallation. This warranty is void if this product is installed

improperly or in an improper environment, overloaded, misused, opened, abused,

or altered in any manner, or is not used under normal operating conditions or not in

accordance with any labels or instructions. There are no other or implied warranties

of any kind, including merchantability and ﬁtness for a particular purpose, but

if any implied warranty is required by the applicable jurisdiction, the duration of any

such implied warranty, including merchantability and ﬁtness for a particular purpose,

is limited to ﬁve years. Leviton is not liable for incidental, indirect, special, or

consequential damages, including without limitation, damage to, or loss of use

of, any equipment, lost sales or proﬁts or delay or failure to perform this warranty

obligation. The remedies provided herein are the exclusive remedies under this

warranty, whether based on contract, tort or otherwise.

DI-000-AEHTK-00A

This page is NOT to be printed in the booklet

DOCUMENTATION

LEVITON INSTRUCTION SHEET/MANUAL

SPECIFICATIONS

KKC 04/05/06

Helvetica

DI-000-AEHTK-00A

Black

N/A

Final fold size:

50 lb. offset

Overall size:

8.0" x 6.0" printer spread-8 pages

4.0" x 6.0" folded size (saddle)s

Paper size:

4.0"

6.0"

FINAL SIZE

Cat. No.

OVERALL SIZE

8.0"

6.0"

Indice

Altri manuali Leviton Accessori

Leviton

Leviton OSFHU-CTW Manuale utente

Leviton

Leviton 47606-BNP Manuale utente

Leviton

Leviton Lev-Lok M56AA Manuale utente

Leviton

Leviton ODSOD-ID Manuale del proprietario

Leviton

Leviton ODS15-ID Manuale utente

Leviton

Leviton ODD24-ID Manuale utente

Leviton

Leviton ACENTI Manuale utente

Leviton

Leviton OSC04-R Series Manuale utente

Leviton

Leviton ODS0D-IDx Manuale utente

Leviton

Leviton 5206-S00 Manuale utente

Leviton

Leviton 47605-ACN Manuale utente

Leviton

Leviton WSWDR-H9W Manuale utente

Leviton

Leviton Acenti QuickPort AC642 Manuale utente

Leviton

Leviton Acenti AC315 Manuale utente

Leviton

Leviton Decora ODS10-IQ Manuale utente

Leviton

Leviton LURDW-00W Lumina RF Manuale utente

Leviton

Leviton AEMRK Manuale utente

Leviton

Leviton JCC ToughLED Pro Manuale utente

Leviton

Leviton OSFHU-ITW Manuale utente

Leviton

Leviton 279 Series Manuale utente

Leviton

Leviton OSM3D-DDW Manuale utente

Leviton

Leviton Decora ODSIO-ID Series Manuale utente

Leviton

Leviton 1x6 Passive Audio Module Manuale utente

Leviton

Leviton ACP15-CB Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente