Lewitt LCT 450 Manuale utente
1
MORE SOUND
MORE CAPSULE,
THE ENTRANCE TO THE WORLD
OF LARGE-DIAPHRAGM CONDENSER
// LCT 450
USER MANUAL
2
// Index
Intro .......................................................................................... 4
Features and top applications .................................................................. 5
User Interface ................................................................................. 6
Technical Data ................................................................................ 8
Safety Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Warranty..................................................................................... 10
Regulatory Information ....................................................................... 11
3
4
// Intro
Thank you for choosing the LEWITT LCT 450!
The LCT 450 delivers exceptionally high value for money, that makes the LCT 450 a true studio workhorse and
a perfect candidate for building up your microphone collection. The Austrian-developed LCT 450 features a
1-inch cardioid condenser capsule, it delivers everything you would expect from a studio microphone: A warm,
round and full bodied sound with rst class transient response and silky sweet high end, which makes it an
impeccable choice for vocals and all sorts of acoustic instruments.
The cardioid polar pattern perfectly qualies the LCT 450 for coincident (XY) and near coincident (ORTF) stereo
recording techniques such as classic drum & percussion overheads, string sections, choir, grand piano or even
stereo vocal recordings, when spaciousness and ambience is needed.
5
// Features
// LEWITT’s entrance to the world of large diaphragm
condenser microphones at an affordable price
// Natural authentic sound with rst-class transient
response
// A perfect choice for vocals, overheads and acoustic
instruments
// Cardioid polar pattern for effective rear sound
rejection
// 1-inch capsule in a small housing
// Corrosion-resistant gold-plated 3-pin XLR output
connector
// Illuminated user interface for quick and easy
handling in dark environments
// Noiseless push buttons for attenuation and HPF
selection
// Immune to electromagnetic interference thanks to
transformerless preamplier circuitry
// Top applications
// Vocals & background vocals
// Classic drum & percussion overhead
// Acoustic instruments (strings, guitars, piano and
similar)
// Ambitious stereo recording techniques (XY, ORTF)
6
// User Interface
1Status Indicator // Indicates different active settings such as key lock,
automatic attenuation, clipping history ... see below for details.
2 Low-cut lter // Use to reduce unwanted low frequency noise caused by wind,
footsteps, structure-borne noise or likewise. The low-cut lter at 80Hz affects
the microphone input by 12 dB per octave and can be set by pressing the left
pushbutton .
3Pre-Attenuation // Use this pad function to prevent clipping when recording
very loud sources. Choose between 0 and 20 dB of attenuation. Change settings
with the right pushbutton .
4Left push button // Push to change low-cut settings. It also activates the
Clipping History.
Clipping History // Pressing the left pushbutton for more than two seconds
activates and deactivates the Clipping History. If clipping occurred since you
have checked previously, the Status Indicator blinks red, the manually
set level of pre-attenuation blinks and the suggested attenuation setting is
illuminated. The history will be cleared after leaving the Clipping History.
2
1
3
54
1
5
4
7
5Right pushbutton // Push to change attenuation settings. Also activates Automatic Attenuation.
Automatic Attenuation // Pressing the right push button for more than two seconds activates (Status
Indicator 1 turns red) and deactivates (Status Indicator turns white) Automatic Attenuation. In this
mode the microphone adjusts the attenuation setting automatically when clipping has occurred.
Key Lock // Press and hold either the left or the right push button for about four seconds to activate (Status
Indicator 1 not illuminated) or deactivate (Status Indicator turns white) the key lock.
1
1
8
// Tech Data
Acoustical operating principle //
pressure gradient transducer, externally polarized
Transducer Ø //
25.4 mm / 1 inch
Polar pattern //
Cardioid
Frequency range //
20 ... 20,000 Hz
Sensitivity //
16 mV / Pa (-36 dBV)
Signal / noise ratio //
79 dB (A)
Equivalent noise level //
15 dB (A)
Dynamic range of FET Mic. Amp. //
138 dB (A)
Max. SPL for 0,5 % THD //
153 dB, 0 dB pre-attenuation
173 dB, 20 dB pre-attenuation
Pre-attenuation pad //
20 dB, switchable
Low-cut //
6 dB / octave at 80 Hz
Rated impedance //
< 150 ohms
Rated load impedance //
> 1.000 ohms
Supply voltage //
48 V +/- 4 V
Current consumption //
5.5 mA
Connector //
gold plated 3-pin XLR
Dimensions //
138 x 52 x 36 mm / 5.43 x 2.04 x 1.42 inch
Net weight //
357 g / 13.12 oz.
9
// Safety Guidelines
// The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and
avoid strong mechanical stress and force.
// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust
or extreme temperatures.
// Keep this product out of the reach of children.
// Do not use force on the switch or cable of the microphone.
// When disconnecting the microphone cable, grasp the connector and do not pull the cable.
// Do not attempt to modify or x it. Contact qualied service personnel in case any service is needed. Please do
not disassemble or modify the microphone for any reasons as this will void users warranty.
// The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent
for cleaning. If necessary the foam wind stopper can be washed with soap water. Please wait till it is dry before
using it again.
// Please also refer to the owner’s manual of the component to be connected to the microphone.
10
// Warranty
All products manufactured by LEWITT GmbH feature a limited two-year warranty. This two-year warranty is
specic to the date of purchase as shown on your purchase receipt.
LEWITT GmbH shall satisfy the warranty obligations by remedying any material or manufacturing faults free of
charge at LEWITT’s discretion either by repair or by exchanging individual parts or the entire appliance. Any
defective parts removed from a product during the course of a warranty claim shall become the property of
LEWITT GmbH.
While under warranty period, defective products may be returned to the authorized LEWITT dealer together
with original proof of purchase. To avoid any damages in transit, please use the original packaging if available.
Please do not send your product to LEWITT GmbH directly as it will not be serviced. Freight charges have to be
covered by the owner of the product.
For further information please visit www.lewitt-audio.com or check your warranty card.
Indice
Altri manuali Lewitt Microfono
Lewitt
Lewitt DGT 260 Manuale utente
Lewitt
Lewitt LCT 440 PURE Manuale utente
Lewitt
Lewitt MTP 240 DM Manuale utente
Lewitt
Lewitt LCT 550 Manuale utente
Lewitt
Lewitt MTP 340 CMs Manuale utente
Lewitt
Lewitt INTERVIEWER Manuale utente
Lewitt
Lewitt LCT 540 Authentica Manuale utente
Lewitt
Lewitt LCT 140 AIR Manuale utente
Lewitt
Lewitt LCT 040 MATCH Manuale utente
Lewitt
Lewitt DGT 450 Manuale utente
Lewitt
Lewitt LCT 340 Manuale utente
Lewitt
Lewitt MTP 540 DM Manuale utente
Lewitt
Lewitt LCT 240 Manuale utente
Lewitt
Lewitt LCT 640 Manuale utente
Lewitt
Lewitt LCT 540 S Manuale utente
Lewitt
Lewitt LCT 449 PURE Manuale utente
Lewitt
Lewitt LCT 640 TS Manuale utente
Lewitt
Lewitt MTP 840 DM Manuale utente
Lewitt
Lewitt LCT 840 Manuale utente
Lewitt
Lewitt LCT 240 PRO Manuale utente
