Lewitt MTP 940 CM Manuale utente
1
ON STAGE
STUDIO TECHNOLOGY
HANDHELD PERFORMANCE MICROPHONE
WITH 1-INCH STUDIO CONDENSER CAPSULE
// MTP 740 CM
USER MANUAL
2
// Index
Intro .......................................................................................... 4
Features and top applications .................................................................. 5
User Interface ................................................................................. 6
Technical Data ................................................................................ 7
Safety Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Warranty...................................................................................... 9
Regulatory Information ....................................................................... 10
3
4
// Intro
Thank you for choosing the LEWITT MTP 740 CM!
The austrian-developed MTP 740 CM handheld microphone is an excellent choice in LEWITT‘s product range,
when you are looking for high-denition condenser studio technology for live vocals. It features the same
1-inch studio capsule design like the handheld perfomance agship MTP 940 CM, but with a streamlined set
of features in order to create the most competitive product package in the perfomance microphone segment.
Whereas classic dynamic handheld vocal microphones like Lewitt‘s MTP 840 DM are your best bet in noisy and
rough rock & roll stage environments, the MTP 740 CM is perfectly qualied to transfer even the most nuanced
and delicate vocal arrangements from the studio to a live stage.
Great vocals don‘t go well with any distractions. The MTP 740 CM‘s cardioid polar pattern provides effective rear
noise rejection and impressive feedback resistance when in use with oor monitors while unique suspension
technology ensures shock resistance and eliminates structure-born noise efciently.
A superior dynamic range of 138 dB (A) with exceptionally low self-noise of 14 dB (A) sets new standards in
current handheld microphone design and makes this condenser transducer capable of capturing even the most
dynamic performances but although the MTP 740 CM was primarily developed for live vocal performances,
there are quite a few other elds of application: try it also on jazzy snare drums and all sorts of percussion and
acoustic instruments!
5
// Features
// Uncompromising true studio condenser sound for
stage performance
// Cardioid polar pattern for clean live sound and
effective rear rejection
// Huge dynamic range of 140 dB (A) and exceptionally
low self-noise of 14 dB (A) thanks to innovative
direct coupling technology (patent pending)
// Shock-resistant and effective structure-born
noise elimination thanks to advanced suspension
technology
// Flat frequency response for natural sound
// Effective integrated acoustic pop and windshield
for excellent protection without compromising high-
frequency clarity
// Illuminated setting indication for quick and easy
handling in dark environments
// Recessed slide switches prevent unintended
changes to settings
// Rock-solid, full-metal die-cast body for rough daily
touring routines
// Hardened spring steel mesh grille to prevent wear
and abuse
// Corrosion-resistant, gold-plated 3-pin XLR
connector
// Top applications
// Authentic and dynamic live vocal performances
// Handheld vocal studio recordings
// Acoustic instruments (live & studio)
// Jazzy snare drum and percussion instruments
6
// User Interface
Status Indicator // Indicates different active settings such as low-cut lter
and pre-attenuation. You can turn off the LED‘s with the LED switch .
Low-cut lter // Use this lter to get rid of unwanted low frequency content
caused by wind, footsteps, structure-borne noise, etc. The low-cut lter at
80Hz affects the microphone input by 12dB per octave and can be accessed by
unscrewing the upper part of the grill.
Pre-attenuation // Use this -10 dB pad function to prevent clipping when
recording very loud sources.
7
// Tech Data
Acoustical operating principle //
pressure gradient transducer, externally polarized
Transducer Ø //
25.4 mm / 1 inch
Polar pattern //
Cardioid
Frequency range //
20 ... 20,000 Hz
Sensitivity //
10 mV / Pa (-40 dBV)
Signal / noise ratio //
79 dB (A)
Equivalent noise level //
15 dB (A)
Dynamic range of FET Mic. Amp. //
140 dB (A)
Max. SPL for 0,5 % THD //
155 dB, 0 dB pre-attenuation
165 dB, 10 dB pre-attenuation
Pre-attenuation pad //
10 dB, switchable
Low-cut //
12 dB / octave at 80 Hz
Rated impedance //
< 150 ohms
Rated load impedance //
> 1.000 ohms
Supply voltage //
48 V +/- 4 V
Current consumption //
5.5 mA
Connector //
gold plated 3-pin XLR
Dimensions //
51 x 183 mm / 2 x 7.2 inch
Net weight //
332 g / 11.71 oz.
8
// Safety Guidelines
// The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and
avoid strong mechanical stress and force.
// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust
or extreme temperatures.
// Keep this product out of the reach of children.
// Do not use force on the switch or cable of the microphone.
// When disconnecting the microphone cable, grasp the connector and do not pull the cable.
// Do not attempt to modify or x it. Contact qualied service personnel in case any service is needed. Please do
not disassemble or modify the microphone for any reasons as this will void users warranty.
// The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent
for cleaning. If necessary the foam wind stopper can be washed with soap water. Please wait till it is dry before
using it again.
// Please also refer to the owner’s manual of the component to be connected to the microphone.
9
// Warranty
All products manufactured by LEWITT GmbH feature a limited two-year warranty. This two-year warranty is
specic to the date of purchase as shown on your purchase receipt.
LEWITT GmbH shall satisfy the warranty obligations by remedying any material or manufacturing faults free of
charge at LEWITT’s discretion either by repair or by exchanging individual parts or the entire appliance. Any
defective parts removed from a product during the course of a warranty claim shall become the property of
LEWITT GmbH.
While under warranty period, defective products may be returned to the authorized LEWITT dealer together
with original proof of purchase. To avoid any damages in transit, please use the original packaging if available.
Please do not send your product to LEWITT GmbH directly as it will not be serviced. Freight charges have to be
covered by the owner of the product.
For further information please visit www.lewitt-audio.com or check your warranty card.
// Regulatory Information
the party responsible for compliance could void the
user‘s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Declaration of conformity can be requested at
info@lewitt-audio.com.
Manufacturer Details
LEWITT GmbH
Burggasse 79
1070 Vienna, Austria
DI Roman Perschon
CEO LEWITT GmbH
Changes or modifications not expressly approved by
10
Altri manuali per MTP 940 CM
1
Indice
Altri manuali Lewitt Microfono
Lewitt
Lewitt LCT 840 Manuale utente
Lewitt
Lewitt DTP 640 REX Manuale utente
Lewitt
Lewitt LCT 340 Manuale utente
Lewitt
Lewitt DTP 640 REX Manuale utente
Lewitt
Lewitt LCT 441 FLEX Manuale utente
Lewitt
Lewitt LCT 040 MATCH Manuale utente
Lewitt
Lewitt MTP 540 DM Manuale utente
Lewitt
Lewitt DGT 260 Manuale utente
Lewitt
Lewitt DGT 650 Manuale utente
Lewitt
Lewitt DGT 450 Manuale utente
Lewitt
Lewitt MTP 240 DM Manuale utente
Lewitt
Lewitt LCT 640 TS Manuale utente
Lewitt
Lewitt MTP 840 DM Manuale utente
Lewitt
Lewitt LCT 1040 Manuale utente
Lewitt
Lewitt DGT 260 Manuale utente
Lewitt
Lewitt DTP 340 TT Manuale utente
Lewitt
Lewitt LCT 040 MATCH Manuale utente
Lewitt
Lewitt LCT 540 S Manuale utente
Lewitt
Lewitt MTP 940 CM Manuale utente
Lewitt
Lewitt MTP 340 CMs Manuale utente
