Lexmark X125 Manuale utente
Copying
Printing
Scanning
Faxing
Troubleshooting
Basics
Index
Notices i
www.lexmark.com
Lexmark X125
Edition: June 2002
The following paragraph does not apply to any country where such provisions are inconsistent with local
law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,THE IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of
express or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to
the information herein; these changes will be incorporated in later editions. Improvements or changes in the
products or the programs described may be made at any time.
Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740
West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark
International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ.
Lexmark may use or distribute any of the information you supply in any way it believes appropriate without
incurring any obligation to you. You can purchase additional copies of publications related to this product by calling
1-800-553-9727. In the United Kingdom and Eire, call +44 (0)8704 440 044. In other countries, contact your point
of purchase.
References in this publication to products, programs, or services do not imply that the manufacturer intends to
make these available in all countries in which it operates. Any reference to a product, program, or service is not
intended to state or imply that only that product, program, or service may be used. Any functionally equivalent
product, program, or service that does not infringe any existing intellectual property right may be used instead.
Evaluation and verification of operation in conjunction with other products, programs, or services, except those
expressly designated by the manufacturer, are the user’s responsibility.
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United
States and/or other countries.
© Copyright 2002 Lexmark International, Inc.
All rights reserved.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and
Copying
Printing
Scanning
Faxing
Troubleshooting
Basics
Index
Notices ii
www.lexmark.com
Lexmark X125
Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc.,
Lexington, KY 40550.
Safety information
• Connect the power cord to a properly grounded electrical outlet that is near the product and easily
accessible.
• Refer service or repairs, other than those described in the operating instructions, to a professional
service person.
• Use only Lexmark replacement parts to maintain the safety of this product.
• Do not use the fax function during a lightning storm.
Warning
In the text of this book, a warning indicates possible machine damage or loss of data.
Copyright advisory
It may be illegal to copy certain materials without permission or license, including documents, images, and
currency. If you are not sure whether you have permission, seek legal advice.
Electronic emission notices
Federal Communications Commission (FCC) compliance information statement
The Lexmark X125 has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
The FCC Class B limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
Copying
Printing
Scanning
Faxing
Troubleshooting
Basics
Index
Notices iii
www.lexmark.com
Lexmark X125
in accordance with the instructions,may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult your point of purchase or service representative for additional suggestions.
The manufacturer is not responsible for any radio or television interference caused by using other than
recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or
modifications could void the user's authority to operate this equipment.
Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B
computing device, use a properly shielded and grounded cable such as Lexmark part
number 12A2405. Use of a substitute cable not properly shielded and grounded may result in
a violation of FCC regulations.
Any questions regarding this compliance information statement should be directed to:
Industry Canada compliance statement
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
(859) 232-3000
Copying
Printing
Scanning
Faxing
Troubleshooting
Basics
Index
Notices iv
www.lexmark.com
Lexmark X125
Avis de conformité aux normes d’Industrie Canada
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
European Community (EC) directives conformity
This product is in conformity with the protection requirements of EC Council directives 89/336/EEC, 73/23/EEC
and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to
electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits and
on radio equipment and telecommunications terminal equipment.
A declaration of conformity with the requirements of the directives has been signed by the Director of
Manufacturing and Technical Support, Lexmark International, S.A., Boigny, France.
This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.
The United Kingdom Telecommunications Act 1984
This apparatus is approved under the approval number NS/G/1234/J/100003 for the indirect connections to the
public telecommunications systems in the United Kingdom.
ENERGY STAR
The EPA ENERGY STAR Office Equipmentprogram is a partnership effort with office equipment manufacturers to
promote the introduction of energy-efficient products and to reduce air pollution caused by power generation.
Companies participating in this program introduce products that power down when they are not being used. This
feature will cut the energy used by up to 50 percent. Lexmark is proud to be a participant in this program.
As an ENERGY STAR Partner, Lexmark International, Inc. has determined that this product meets the ENERGY
STAR guidelines for energy efficiency.
Copying
Printing
Scanning
Faxing
Troubleshooting
Basics
Index
Notices v
www.lexmark.com
Lexmark X125
Telecommunications notices
FCC rules part 68
This equipment complies with Part 68 of the FCC Rules. A label on the back of the equipment shows its FCC
registration number and ringer equivalence number (REN).
Your telephone company may ask you for these numbers in order to determine how many devices may be
connected to your telephone line (in most areas, no more than five). If too many RENs are assigned to your
telephone line, this device may not ring in response to an incoming call. Contact the telephone company to
determine the maximum RENs for your calling area.
This equipment uses an RJ-11C Universal Service Order Code (USOC) jack, and is designed to be connected to
the telephone network or premises wiring using a compatible jack that is FCC Part 68 compliant. An FCC
compliant telephone cord is provided with this equipment. Refer to the setup documentation for instructions about
connecting the fax telephone cable.
If you experience problems with this equipment that you cannot resolve, contact Lexmark International, Inc., for
repair and warranty information. If the problems are causing harm to the telephone network, the telephone
company may ask you to disconnect the equipment from the network until the problem is resolved. If the
equipment causes harm to the telephone network, the telephone company will notify you in advance, or as soon
as possible, that temporary discontinuance of service may be required. You will also be notified of your right to file
a complaint with the FCC if you believe it is necessary.
The telephone company may make changes to its facilities, equipment,operations, or procedures that could affect
the operation of this equipment. If this happens, the telephone company will notify you in advance so you can
make necessary adjustments in order to maintain uninterrupted service.
This equipment cannot be used on telephone company-provided coin service.
Connection to party lines is subject to state tariffs.
To avoid damage caused by lightning strikes and other electrical surges, we recommend that you install an ac
surge protector in the outlet to which this device is connected.
Copying
Printing
Scanning
Faxing
Troubleshooting
Basics
Index
Notices vi
www.lexmark.com
Lexmark X125
The Telephone Consumer Protection Act of 1991 makes it unlawful to send a fax unless the following information
is included (1) in a margin at the top or bottom of each transmitted page, or (2) on the first page of the
transmission:
• Date and time the fax is sent
• Identification of the business, other entity, or individual sending the fax
• Telephone number of the sending machine or such business, other entity, or individual.
Network Compatibility Notice
Scope
This Network Compatibility Notice contains national requirements for proper operation of telecommunications
equipment within specific countries and is based on the ETSI Document, a guide to the application of TBR 21, EG
201 121 V1.1.2 (1998-07).
The Lexmark X125 All-In-One has been tested for Pan-European single terminal connection to thepublic switched
telephone network (PSTN). However, due to differences between the individual PSTNs provided in different
countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN
network termination point.
In the event of problems, you should contact your equipment supplier in the first instance.
Network compatibility
In accordance with the requirements of EG 201-121, no national network compatibility issues have been identified
for the following countries:
Austria Belgium Denmark Finland France Germany
Greece Iceland Ireland Italy Luxemburg Netherlands
Norway Portugal Spain Sweden Switzerland United
Kingdom
Copying
Printing
Scanning
Faxing
Troubleshooting
Basics
Index
Notices vii
www.lexmark.com
Lexmark X125
Lexmark is providing the following information to demonstrate telecommunications conformity for the Lexmark
X125 All-In-One to Common Technical Regulation 21 (CTR 21) and EG 201-121.
• Using the X125 All-In-One in Germany
– The X125 All-In-One requires a German Billing tone filter, Lexmark Part Number 14B5123, to be installed
on any line which receives metering pulses in Germany.
Note: Metering pulses may or may not be present on analog lines in Germany. The subscriber may
request that metering pulses be placed on the line, or can have them removed by calling the
German Network Provider. Normally, metering pulses are not provided unless specifically
requested by the subscriber at time of installation.
• Using the X125 All-In-One in Switzerland
– The X125 All-In-One requires a Switzerland Billing tone filter, Lexmark Part Number 14B5109, to be
installed on any line which receives metering pulses in Switzerland.
Note: The Lexmark filter must be used, as metering pulses are present on all analog telephone
lines in Switzerland.
Copying
Printing
Scanning
Faxing
Troubleshooting
Basics
Index
Home
www.lexmark.com
Lexmark X125
X125
All-In-One
Tips for using this guide:
•Click the categories on the left side of the page to
navigate through this guide, section by section.
•Click the left or right arrow in the lower right of the
page to navigate through this guide, page by page.
•Click the house icon in the lower right of the page to return to the Home Page.
•Click Notices to view edition information.
•Select File Print Properties to print this guide. Select landscape orientation.
Select the pages you want to print, and then click OK.
•To view notices or safety information click Electronic emission notices or Safety
information.
Basics
Copying
Printing
Scanning
Faxing
Troubleshooting
2
Basics
Index
www.lexmark.com
Lexmark X125
With your LexmarkTM X125 All-In-One, you can scan, print, copy, and fax documents using
your operator panel and the All-In-One software. Select a category below:
• Using the operator panel
• Using the operator panel menus
• Using the Settings Utility
• Using the Settings dialog box
• Loading specialty paper
• Loading a document
• Maintaining the cartridges
Basics
Copying
Printing
Scanning
Faxing
Troubleshooting
3
Basics
Index
www.lexmark.com
Lexmark X125
Using the operator panel
The table identifies the operator panel buttons and their functions:
#Press: To:
1 Menu Scroll through available features on the display.
1
6
7
12
2
5
8
11
9
3
13
410
Altri manuali per X125
4
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Lexmark Stampante tutto in uno
Lexmark
Lexmark X940E Manuale utente
Lexmark
Lexmark Pro715 Manuale utente
Lexmark
Lexmark W810n - Optra B/W Laser Printer Manuale di servizio
Lexmark
Lexmark X925 Manuale utente
Lexmark
Lexmark MX-B427W Manuale utente
Lexmark
Lexmark MX717 Manuale utente
Lexmark
Lexmark XS796dte Manuale
Lexmark
Lexmark XM1145 Manuale utente
Lexmark
Lexmark CX310 series Manuale utente
Lexmark
Lexmark 19Z0202 - X 864dhe 4 B/W Laser Manuale utente
Lexmark
Lexmark 6300 Series Manuale utente
Lexmark
Lexmark X340 Manuale utente
Lexmark
Lexmark X644E - With Modem Taa/gov Manuale di istruzioni e di sicurezza
Lexmark
Lexmark XS795dte Manuale utente
Lexmark
Lexmark XC2132 Manuale utente
Lexmark
Lexmark MX611de Manuale utente
Lexmark
Lexmark MB2236 Manuale utente
Lexmark
Lexmark X820E Manuale utente
Lexmark
Lexmark MX310dn Manuale utente
Lexmark
Lexmark X654DE Manuale utente
Manuali Stampante tutto in uno popolari di altre marche
Triumph Adler
Triumph Adler DC 2016 Manuale
Epson
Epson WorkForce WF-2510 Guida utente
Epson
Epson Stylus Scan 2000 Manuale di installazione e funzionamento
Epson
Epson PictureMate Snap PM 240 Manuale di istruzioni
Konica Minolta
Konica Minolta bizhub C35 Manuale utente
Brother
Brother MFC-J430w Manuale utente
