LF Allen + Roth LWS1176D Manuale utente
ITEM #0336271
MODEL
#
LWS1176D
POST LANTERN
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 1-866-439-9800, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
1
welcoming • sophisticated • inspiring
Serial Number Purchase Date
ATTACH YOUR RECEIPT HERE
EB14582 Lowes.com/allenandroth
allen + roth®is a registered trademark
of LF, LLC. All Rights Reserved.
PART DESCRIPTION QUANTITY
A
BCenter Stem
Fixture Hood 1
1
CShade 1
DFixture Body 1
PACKAGE CONTENTS
2
B
A
B
C
B
D
B
B
Lowes.com/allenandroth
HARDWARE CONTENTS (shown actual size)
Washer
Qty. 1
Finial
Qty. 1
DD
Nipple
Qty. 1
EE
Hex Coupling
Qty. 1
FF
Hex Nut
Qty. 1
GGCC
3
SAFETY INFORMATION
AA BB
Wire
Connector
Qty. 3
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 20 - 30 minutes
Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers,
Wire cutters, Electrical tape, Safety goggles and Ladder.
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit
breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
Mounting Screw
Qty. 3
Lowes.com/allenandroth
3. Carefully fit the post fitter on the fixture body (D)
over the end of the post (not supplied), making
sure the post fitter is fully seated. Mark the drill
point for the 3 mounting screws using 3 mounting
holes as reference. After marking hole locations,
remove fixture from post and drill 1/16 in. pilot holes
for screws.
3
Post
Post Fitter
4
ASSEMBLY INSTRUCTIONS
1. Thread the beaded end of the center stem (C)
into the mounting hole on the top center of the
junction box inside of fixture body (D). Hand
tighten until snug.
1
2. Place the shade (B) into the fixture body (D). 2
Mounting
Hole
C
D
D
D
B
Lowes.com/allenandroth
5
ASSEMBLY INSTRUCTIONS
Hardware Used
AA x 3
Mounting
Screw
AA
5. Coat the top 1 in. of the post with clear silicone
caulk (not supplied) and position the post fitter
on the fixture body (D) onto the post. Be sure to
seat it completely, aligning the holes in the fitter
with the 1/16 in. pilot holes drilled into the post.
Secure the fixture to post with 3 mounting screws (AA).
5
4. Attach ground fixture wire to the ground wire
from the post (usually GREEN or BARE). Connect
the neutral WHITE or RIBBED side fixture wire to
the neutral usually WHITE wire from the post.
Connect the hot BLACK or SMOOTH side fixture
wire to the hot usually BLACK wire from the
post. Fasten wires together with a wire
connector (BB) and tightly wrap wire connector
(BB) with electrical tape (not included).
4
White Wire
From Post
Black Wire
From Post
Bare, or Green
Ground Wire Bare, or Green
Fixture Ground Wire
From Post
White or
Ribbed Side
From Fixture
From Fixture
Black or
Smooth Side
BB
Hardware Used
BB x 3
Wire
Connector
Post
Mounting
Hole
Post Fitter
D
Lowes.com/allenandroth
6
Hardware Used
CC x 1
Washer
FF x 1
Hex Coupling
6. Install (3) 60-watt max. candelabra-base
incandescent bulbs or (3) 13-watt max. spring
self-ballasted candelabra-base CFL (none
included).
6
ASSEMBLY INSTRUCTIONS
Bulb
7. Place the fixture hood (A) over the top end of
the center stem (C), attach to the top edge of
the fixture body (D). Pass the washer (CC) over
the center stem (C) and secure with the hex
coupling (FF). Hand tighten until snug.
7FF
A
D
CC
C
Hardware Used
DD x 1
Finial
EE x 1
Nipple
GG x 1
Hex Nut
8. Thread the hex nut (GG) onto one end of the nipple
(EE). Thread the nipple (EE) into the hex coupling
(FF). Using pliers, thread the hex nut (GG) against
the hex coupling (FF) and hand tighten until snug.
Thread the finial (DD) onto the end of the nipple
(EE) and hand tighten until snug.
8DD
EE
A
FF
GG
Lowes.com/allenandroth
7
CARE AND MAINTENANCE
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives
to clean fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Bulbs will not light. 1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
Fuse blows or the
circuit breaker trips
when light is turned
on.
Crossed wires or power wire is
grounding out. Check wire connection.
WARRANTY
The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for
five (5) years from the date of purchase. If within this period the product is found to be defective in
material or workmanship, the product must be returned, with a copy of the original sales receipt as
proof of purchase in the original carton, to the place of purchase. The manufacturer will, at its option,
repair, replace or refund the original purchase price to the consumer. This warranty does not cover
fixtures becoming defective due to misuse, accidental damage, improper handling and/or installation
and specifically excludes liability for direct, incidental or consequential damages. As some states do
not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may
not apply to you. This warranty gives you specific legal rights. You may have other rights that vary
from state to state.
BB
K
J
I
Lowes.com/allenandroth
8
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. - 6 p.m., EST,
Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
B
PART DESCRIPTION PART #
B Shade G2383SH
Lowes.com/allenandroth
Printed in China
allen + roth®is a registered trademark
of LF, LLC. All Rights Reserved.
Revision date:2014-10-08
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali LF Lanterna
