LG HBM-290 Manuale utente
English
Español
Rev 1.0 US
All rights reserved.
LG Electronics Inc., 2013
Note: For the best performance and to prevent
any damage to, or misuse of the HBM-290,
please read all of the information
carefully before to use.
WARNING :
This product contains chemicals known to the State of California
to cause cancer and birth defects or reproductive harm.
Wash hands after handling.
LG Electronics
BLUETOOTH®Headset
HBM-290 User Manual
2 3
ENG
Introduction 3
- Included in Package 3
Description of parts 4
How to use 4
- Change direction 4
- Charging 5
- Low battery 5
- Battery status alert 5
- Power on 5
- Power off 5
- Pairing 6
- Auto-reconnect 7
- Volume control 7
- Calling 7
• Answering a call 7
• Making a call 7
• Voice dialing 8
• Last number redial 8
• Ending a call 8
• Transferring a call 8
• Call waiting 8
• Call reject 8
• Mic mute 8
- Advanced multipoint 9
- Audio streaming (A2DP) 10
- HD speaker 10
- SMS reader 10
Summary of button functions 11
LED indication 12
Troubleshooting 12
Specification 13
Precautions 13
Declaration of confirmation 14
Additional information 14
Limited warranty 17
Important safety information 17
Table of Contents
2 3
ENG
Included in the package
The LG HBM-290 is a light weight wireless headset that uses Bluetooth®technology.
This product can be used as an audio accessory for devices that support the
headset, hands-free or A2DP Bluetooth® proles.
LG HBM-290
Bluetooth®Headset
Ear loop Extra Earbuds
(2 Sets)
Charger
User manual Warranty Card
Introduction
4 5
ENG
Change direction
Call Button
Microphone
Charging Port
Speaker
Left Right
Front
Back
Description of parts
How to use
Volume Up/Down
Button
Power Button
LED indicator
4 5
ENG
Charging
- When the charger is connected, with power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid red light.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the headset.
- When charging is complete, the LED indicator will turn off.
Low battery
- An announcement will play once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Power on
-
Press and hold the POWER button for 3 seconds.
• The power will turn on and a startup tone will play.
- The audible battery status alert will let you know the battery level.
Power off
- Press and hold the POWER button for 3 seconds.
• A shutdown tone will play, the Bluetooth link will disconnect and the power will
turn off.
Battery status alert
- By pressing and holding the VOLUME DOWN button for 3 seconds, you can check
the battery status of the HBM-290. The audible battery status alert will inform you of
the battery level. There are 3 levels of battery power:
1. Battery High
2. Battery Medium
3. Battery Low
How to use
6 7
ENG
- Before using the headset for the rst time, it must be paired with a Bluetooth
enabled device.
- There are 2 pairing modes with the HBM-290.
1) Easy Pairing
a) Move the Power Switch to the “ON” position.
b) The headset will enter auto-reconnect mode for 10 seconds.
(If your headset has already been paired with a device, the headset will
automatically reconnect to the device when the HBM-290 is powered on.)
c) After 10 seconds, the HBM-290 will automatically enter pairing mode.
d) When the headset enters pairing mode, the LED indicator will show a solid
white light.
e) Using your handset, nd the Bluetooth menu and “search for” or “add” new
devices.
f) Select “LG HBM-290” from the list of devices to pair it with your device.
g) If you are asked for a passkey or PIN during pairing, please enter “0000”
(4 zeros).
h) Once the devices are paired, you will hear “Headset paired”.
i) After pairing has been completed, make sure you “connect” to the
LG HBM-290.
j) If you want to pair with a different device in the future, the headset must be
placed into pairing mode.
k) If the headset is in pairing mode for 3 minutes without being connected to a
device, the HBM-290 will automatically turn off.
2) Manual Pairing
a) With the power off, press and hold the POWER button for 6 seconds.
b) Continue pairing process from letter “e)” above.
Pairing
How to use
6 7
ENG
Volume control
- Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume.
- There are eight levels of speaker volume.
Calling
Answering a call
- When there is an incoming call, the headset will ring.
- Briey press and release the CALL button to answer the incoming call.
Making a call
- If you make a call from the connected handset, the call will (depending on the phone
settings) automatically transfer to the headset. If the call is not automatically transferred,
you can manually transfer the call by briey pressing the CALL button on the HBM-290
(handset and headset must be paired).
How to use
Auto-reconnect
- If the HBM-290 is turned off (either accidentally or intentionally) while connected,
the headset will disconnect from the device.
The headset and handset will automatically reconnect when the HBM-290 is turned
back on (provided that both devices are within the required range of 33 feet (10
meters).
Out of range
- When the connected device and the HBM-290 are separated by a range of 33 feet
(10 meters) or more, the headset will alert the user with a beep, and the headset
and device will disconnect.
- When the device and the HBM-290 are within the required range again, the HBM-
290 will automatically reconnect to the handset.
- If the headset and device do not automatically reconnect when they are back within
the required range, briey press the CALL button on the HBM-290 to reconnect
manually.
- While trying to Reconnect, your headset will beep and the LED indicator will icker
twice every 5 seconds.
- If the headset does not Reconnect within 60 minutes, it will turn off.
8 9
ENG
Voice dialing
- Briey press the CALL button to activate “Voice dialing”.
For best results, record the voice dialing tag through your headset.
NOTE: If your handset does not support voice dialing, this action may activate Last
Number Redial.
Last number redial
- Press and hold the CALL button for 1 second to activate “Last number redial”.
The headset will beep and then call the last number dialed.
* Feature will not work if held for longer than 1 second.
Ending a call
- Briey press the CALL button.
Transferring a call
- While on a call on your handset, briey press the CALL button to transfer the audio to
the headset (the headset and handset must be paired).
- To transfer a call from the headset to handset, press and hold the VOLUME UP button
for 3 seconds.
Call waiting
- Answer a second call without hanging up the rst by pressing the CALL button for 1
second (You will hear a beep). Press the CALL button for 1 second to return to the
original call.
- Briey press the CALL button to end the active call or both calls at once. (subject to
handset support)
Call reject
- Activate call reject by pressing the CALL button for 1 second when the handset rings.
* These functions may only be used if your handset supports them.
For further information about using these features, please consult your handset’s user
manual.
Mic mute
- Press and hold the VOLUME UP and VOLUME DOWN buttons simultaneously for 1
second to mute/unmute the mic during conversation.
How to use
8 9
ENG
Advanced multipoint
The HBM-290 is capable of having two devices connected to the headset at the same
time. This will give you the freedom of using call waiting between calls on both of your
connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets. (per the pairing
instructions on page 6).
- Turn off the headset.
- With the power off, press and hold the POWER button on the HBM-290 for 6
seconds to enter Manual Pairing mode.
- Now, pair and connect the headset with your other Bluetooth-enabled handset.
(This will be your primary handset).
- Once this handset is paired and connected, go back and connect the originally paired
handset to the headset. (This will now be your secondary handset).
* NOTE: When the HBM-290 is connected to two handsets at the same
time(multipoint), the headset calling functions will work with the primary
handset.
Calling function
- Voice Dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
Call waiting
- While speaking on an active call, press the call button for 1 second to switch to an
incoming call.
- To switch between 2 active calls, press the call button for 1 second.
- To end both calls briey press the call button.
- If both handsets are receiving an incoming call, the headset will default to the primary
device.
How to use
10 11
ENG
Audio streaming (A2DP)
The HBM-290 supports music streaming (A2DP).
When you play music from your A2DP enabled device, it will automatically transfer
to your headset. Music will automatically pause when you have an incoming call.
When the call is ended the music will start playing again.
A2DP allows streaming of all audio from your handset and running applications
including music and GPS navigation.
SMS reader
The HBM-290 supports SMS reading on Android TM based devices.
In the AndroidTM Marketplace search for the LG “BT Reader” application and install
on your device to use this function.
* The 2D barcode shown below helps you download the LG “BT Reader” application
from the Android MarketTM.
HD speaker
The HBM-290 supports high denition voice calling and audio streaming.
*Network must support HD Voice for higher quality calling.
How to use
Altri manuali per HBM-290
2
Indice
Altri manuali LG Cuffia
LG
LG HBM-310 Manuale utente
LG
LG TONE INFINIM HBS-910 Manuale utente
LG
LG HBM-760 Manuale utente
LG
LG TONE Free HBS-FN6 Manuale utente
LG
LG 285 Manuale utente
LG
LG HBM-530 Manuale utente
LG
LG TONE-FP9 Manuale utente
LG
LG TONE Studio HBS-W120 Manuale utente
LG
LG TONE FREE TONE-DT60Q Manuale utente
LG
LG BTS1 Manuale utente
LG
LG TONE Active HBS-A80 Manuale utente
LG
LG BLUETOOTH HBS-250 Manuale utente
LG
LG HBS-700 Manuale utente
LG
LG TONE ULTRA HBS-810 Manuale utente
LG
LG TONE-DT80Q Manuale utente
LG
LG TONE Free HBS-FN6 Manuale utente
LG
LG TONE Active HBS-850 Manuale utente
LG
LG HBM-580 Manuale utente
LG
LG TONE Free HBS-FN5W Manuale utente
LG
LG TONE Free HBS-FN6 Manuale utente
