LG 37LN540B.AEU Manuale utente
User Guide
This is a 「User Guide」 installed on the TV.
The contents of this guide are subject to change without prior notice for quality
improvement.
GP2
GP2
eng
❐To set favourite programmes
SETTINGS ➾ SETUP ➙ Programme Edit
1 Select the channel you want.
2 Press the FAV button to select Favourite Group and then OK.
✎You can check your favourite channels by pressing the LIST button on the
remote control.
❐To use Favourite
Press the FAV button.
You can only view the channels you set as favourites.
GP2
eng
Press GUIDE button.
[In Digital mode only]
Obtains information about programmes and airtime. Checks the broadcasting
time of the desired programme and schedule viewing.
GP2
eng
❐Automatically Setting Up Programme
SETTINGS ➾ SETUP ➙Auto Tuning
Automatically tunes the programmes.
1 Select Country where the TV is used. Programme settings change depending
on the country you choose.
2 Initiate Auto Tuning.
3 Select Input Source of your choice.
4 Set Auto Tuning following screen instructions.
✎If Input Source is not connected properly, programme registration may not
work.
✎Auto Tuning only finds programmes that are currently broadcasting.
✎If Lock System is turned on, a pop-up window will appear asking for
password.
GP2
eng
❓Cable DTV Setting option
When searching for programmes using FULL setting it can take a long time. The
following values are needed in order to search all available programmes quickly
and correctly. The commonly used values are provided as “default”.
• Frequency : Enter a user-defined frequency.
• Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which
a device such as modem sends symbols to a programme).
• Modulation : Enter a user-defined modulation. (Modulation: Loading of audio
or video signals onto carrier).
• Network ID : Unique identifier allocated for each user.
• Start Frequency : Enter a user-defined start frequency range.
• End Frequency : Enter a user-defined end frequency range.
GP2
eng
❐Cable DTV Setting
SETTINGS ➾ SETUP ➙ Cable DTV Setting
[In Cable mode only]
When Channel Auto Update is On, you can update information for all the
programmes that can be updated, including the programme currently being
watched. When Channel Auto Update is Off, you can only update information for
the programme currently being watched.
✎The range that a user can select from the Service Operator menu differs
depending on number of Service Operator supported by each country.
✎If number of supported Service Operator for each country is 1, corresponding
function becomes inactive.
✎You can not select the Cable DTV Setting when the service operator is set to
“Ziggo”.
GP2
eng
❐To use Manual Tuning
SETTINGS ➾ SETUP ➙ Manual Tuning
Adjusts programmes manually and saves the results.
For digital broadcasting, signal strength and signal quality can be checked.
For analogue broadcasting, you can set up station names and use fine tuning.
Normally fine tuning is only necessary if reception is poor.
✎You can also adjust the Frequency(KHz) and Bandwidth.
GP2
eng
❐To edit programmes
SETTINGS ➾ SETUP ➙ Programme Edit
Edits the saved programmes.
Set as favourite programme, block/unblock programme, skip programme etc. of
the selected programme.
GP2
eng
SETTINGS ➾ SETUP ➙ Programme Mode
[Depending on model]
This function allows you to watch a tuned program in Antenna, Cable, Satellite,
or CAM Mode.
✎You can only watch programs in the selected mode.
✎The CAM menu is only available when the CAM Mode is enabled. The menu
name may vary depending on the CAM type.
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali LG TV LED
LG
LG 47LA8609.AEU Manuale utente
LG
LG 22LV2510 Manuale utente
LG
LG UM75 Series Manuale utente
LG
LG 47LB6700.ATR Manuale utente
LG
LG 55LA66 Series Manuale utente
LG
LG 43UN6950ZUA Manuale utente
LG
LG 32LN5700 Manuale utente
LG
LG UF77 series Manuale utente
LG
LG 49UK7500PSA Guida rapida
LG
LG 79UG8800 Manuale utente
