LG 216SC Manuale utente
Color Monitor
USER GUIDE
MANUEL D'UTILISATION
MODEL : 216SC
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception (which can be determined by turning the equipment off and
on), the user is encouraged to try to correct the interference by using
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by LG
Electronics Inc. for compliance could void the user's (or your) authority
to operate the equipment. Only peripherals (digital input/output devices,
terminals, printers, etc.) certified to comply with the Class B limits may
be attached to this monitor. Operation with non-certified peripherals is
likely to result in interference to radio and TV reception.
Only shielded signal cables may be used with this System.
Canadian D. O. C. Notice
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
i
Environmental Labelling of Personal Computers
ii
iii
TCO’95 Environmental Requirements
iv
v
Shipping Package
The packaging material can be recycled, or you can save it to return
the monitor to a service center for repair or disposal.
CFC Compounds in Distribution Packaging
Cushioning material used for shipping finished monitors are not
manufactured with nor do they contain any CFC compounds.
Design for Disassembly/Recycling
These monitors have been designed for easy end-of-life disassembly
and recycling. Fasteners are generally of the same type for efficient
disassembly. Components made of different materials can be easily
separated and plastics have been identified using intermational
symbols to aid in recycling.
Monitor Disposal
WARNING
If you need to dispose of a monitor, ask a qualified service
representative for the proper procedure. Improper disposal
could result in personal injury from implosion.
Table of Contents
Introduction
Features...................................................................................................A1
Monitor Registration
Notice.......................................................................................................A2
Trademark Acknowledgments .................................................................A2
Important Precautions
On Safety.................................................................................................A3
On Installation..........................................................................................A4
On Cleaning.............................................................................................A4
On Repacking..........................................................................................A4
Connecting the Monitor
Connecting to any IBM VGA PC Compatible System..............................A6
Connecting to an Apple Macintosh II, Centris and Quadra......................A7
Using the BNC Connectors......................................................................A8
Location and Function of Controls
Front View................................................................................................A9
Rear View ................................................................................................A9
Control Panel Function
OSD Enter Button..................................................................................A10
OSD Select/Adjustment Control.............................................................A10
Brightness Adjustment Control ..............................................................A10
Contrast Adjustment Control..................................................................A10
Power (DPMS) Indicator........................................................................A11
Power ON/OFF Button...........................................................................A11
On Screen Display(OSD) Control Adjustment.......................................A11
OSD Adjustment and Selection Items..............................................A12
Self Diagnostics and DDC
Self Diagnostics ....................................................................................A18
DDC (Display Data Channel).................................................................A18
Video Memory Modes
Factory Preset Timing Signal Chart.......................................................A19
User Modes............................................................................................A20
Recalling Display Modes........................................................................A20
Energy Saving Design
Power Consumption...............................................................................A21
Troubleshooting and Service
Troubleshooting.....................................................................................A22
Service...................................................................................................A23
Specifications..........................................................................................A24
Monitor Limited Warranty....................................................................A26
English
vi
A1
Introduction
Thank you for purchasing an LG high resolution monitor. It will give
you high resolution performance and convenient reliable operation in
a variety of video operating modes.
Features
The monitor is a 21-inches(20 inches viewable) intelligent, micropro-
cessor based monitor compatible with most analog RGB (Red, Green,
Blue) display standards, including IBM PC®, PS/2®, Apple®,
Macintosh®, Centris®, Quadra®, and Macintosh II family. It can also be
used with a Sun SPARC workstation as well as other sources using
the 5 BNC connectors. The monitor provides crisp text and vivid color
graphics with VGA, SVGA, XGA, and VESA Ergo modes (non-
interlaced), and most Macintosh compatible color video cards when
used with the appropriate adapter.
The monitor's wide compatibility makes it possible to upgrade video
cards or software without purchasing a new monitor.
Digitally controlled auto-scanning is done with the microprocessor for
horizontal scan frequencies between 30 and 96 kHz, and vertical
scan frequencies between 50 and 160 Hz. The microprocessor-based
intelligence allows the monitor to operate in each frequency mode
with the precision of a fixed frequency monitor.
The microprocessor based digital controls allow you to conveniently
adjust a variety of image controls by using the OSD (On Screen
Display).
The monitor has 32 memory locations for display modes, 9 of which
are factory preset to popular video modes. 8 of these are accurately
aligned to popular standards, and one is pre-loaded to align the
image within user mode. In addition, there are 24 user storable
modes, for a total of 32 memory modes.
This monitor is capable of producing a maximum horizontal resolution
of 1600 dots and a maximum vertical resolution of 1200 lines. It is
well suited for CAD work and sophisticated windowing environments.
For greater user health and safety, this monitor complies with the
stringent Swedish TCO’95 requirements for low radiation emissions.
For low cost of monitor operation, this monitor is certified as meeting
the EPA Energy Star requirements, and utilizes the VESA Display
Power Management Signalling (DPMS) protocol for power saving
during non-use periods.
English
Monitor Registration
The model and serial numbers are found on the rear of this unit.
These numbers are unique to this unit and not available to others.
You should record requested information here and retain this guide
as a permanent record of your purchase. Staple your receipt to this
page.
Date of Purchase :
Dealer Purchased From :
Dealer Address :
Dealer Phone No. :
Model No. :
Serial No. :
Notice
All rights reserved. Reproduction in any manner, in whole or in part, is
strictly prohibited without the written permission of LG Electronics Inc.
Trademark Acknowledgments
LG is a trademark of LG Electronics Inc.
IBM is a registered trademark and VGA is a trademark of
International Business Machines Corporation.
WARNING : To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
AVERTISSEMENT :
Ne pas placer cet appareil dans un endroit humide.
Cela peut entraîner un incendie ou une décharge électrique.
A2
Important Precautions
This unit has been engineered and manufactured to assure your
personal safety, but improper use can result in potential electrical
shock or fire hazard. In order not to defeat the safeguards
incorporated in this monitor, observe the following basic rules for its
installation, use, and servicing. Also follow all warnings and
instructions marked directly on your monitor.
On safety
1. Use only the power cord supplied with the unit. In case you use
another power cord, make sure that it is certified by the applicable
standards (UL/CSA or VDE) if not being provided by the supplier.
2. Operate the monitor only from a power source indicated in the
specifications of this manual or listed on the monitor. If you are not
sure what type of power supply you have in your home, consult
your dealer.
3. Overloaded AC outlets and extension cords are dangerous. So are
frayed power cords and broken plugs. They may result in a shock
or fire hazard. Call your service technician for replacement.
4. DO NOT OPEN THE MONITOR. There are no user serviceable
components inside. There are Dangerous High Voltages inside,
even when the power is OFF. Contact your dealer if the monitor is
not operating properly.
5. To avoid personal injury :
Do not place the monitor on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not try to roll a stand with small casters across thresholds or
deep pile carpets.
6. To prevent Fire or Hazards:
Always turn the monitor OFF if you leave the room for more than
a short period of time. Never leave the monitor ON when leaving
the house.
A3
Indice
Altri manuali LG Monitor
LG
LG MU-42PZ90V Manuale utente
LG
LG 38BQ85C Manuale utente
LG
LG 27UP650W Manuale utente
LG
LG W2052TQ - - 20" LCD Monitor Manuale utente
LG
LG 32GR93U Manuale utente
LG
LG M5201C-BA Guida rapida
LG
LG FLATRON L1520B Manuale utente
LG
LG 32GN550-B.AAU Manuale utente
LG
LG M3201T-BA Manuale utente
LG
LG 32UQ750 Manuale utente
