LG 34UM95-PD Manuale utente
www.lg.com
Owner's Manual
IPS LED MONITOR
(LED MONITOR)
34UM95-PD
34UM95-PE
34UM94-PD
Please read the safety information carefully
before using the product.
IPS LED Monitor (LED Monitor) Model List
ENGLISH
2Table of ConTenTs
Table of ConTenTs
3lICense
4asseMblInG anD
PRePaRInG
4 Product Composition
5 Product and Button Description
5 - How to Use the Joystick Button
6 - Input Connector
7 Moving and Lifting the
Monitor
8 Installing the Monitor
8 - Assembling the Stand
9 - Detaching the Stand
10 - Installing on a Table
11 - Adjusting the angle
11 - Tidying up Cables
12 - Installing the Wall Mount Plate
12 - Installing on the Wall
14 - Using the Kensington Lock
15 UsInG THe MonIT oR
15 Connecting to a PC
15 - HDMI Connection
16 - DisplayPort Connection
16 - Thunderbolt ( ) Connection
17 Connecting AV Devices
17 - HDMI Connection
17 Connecting Peripherals
17 - USB Cable connection - PC
18 - Connecting Headphones
19 InsTallInG THe lG
MonIT oR sofTW aRe
22 UseR seTTInGs
22 Activating the Main Menu
22 - Main Menu Features
23 User Settings
23 - Menu Settings
24 - Ratio
25 - Function
26 - PBP
27 - Picture
28 - Color
29 - Settings
30 - Reset
31 - Reader
32 TRoUblesHooTInG
34 PRoDUCT sPeCIfICa TIon
35 Factory Support Mode
(Preset Mode, HDMI/DisplayPort/
Thunderbolt PC)
35 HDMI Timing (Video)
35 Power LED
36 PRoPeR PosTURe
36 Proper Posture for Using the Monitor
WaRnInG : This product contains chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands after handling.
ENGLISH
3
lICense
lICense
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort
compliance logo for dual-mode source devices are all registered trademarks of
the Video Electronics StandardsAssociation.
ENGLISH
4asseMblInG anD PReP aRInG
asseMblInG anD PReP aRInG
Product Composition
Please check whether all the components are included in the box before using the product. If there are
any missing components, contact the retailer where you purchased the product. Note that the product and
related components may look different from those shown here.
CD(owner's Manual /
software) / Guides /
Cards Power cord aC/DC adapter HDMI cable
stand base screw Cover Two screws
(M4 x 10) DisplayPort Cable
(Depending on country)
Clear sheet
yAlways use genuine LG components to ensure safety and product performance.
yThe product warranty will not cover damage or injury caused by the use of unauthorized components.
yIt is recommend that use the supplied components.
CaUTIon
yThe components may look different from those illustrated here.
yWithout prior notice, all product information and specifications contained in this manual are subject to
change to improve the performance of the product.
yTo purchase optional accessories, visit an electronics store or an online shopping site, or contact the
retailer from which you purchased the product.
yThe power cord provided may differ depending upon the region.
noTe
ENGLISH
5
asseMblInG anD PReP aRInG
Product and button Description
Joystick
button
Power indicator
yon Power on
yoff Power off
How to Use the Joystick button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with
your finger.
basic functions
Power on Press the joystick button once with your finger to turn on the
monitor.
Power off Press and hold the joystick button once with your finger to turn off
the monitor.
◄/►Volume
Control You can control the volume by moving the joystick button left/right.
yThe joystick button is located at the bottom of the monitor.
yBefore turning on the monitor, please make sure that the DC switch on the rear side of product is On.
(Only 34UM95-PE)
noTe
ENGLISH
6asseMblInG anD PReP aRInG
Input Connector
34UM95-PE
34UM95-PD
DC-IN
(19 V )
DP IN
HDMIIN1
H/P
USB UP USB IN 1
5 V 1.1 A
USB IN 2
5 V 0.5 A
USB IN 3
5 V 0.5 A
HDMI
IN
2
HDMIIN2
HDMIIN2
HDMI
IN
2
DC-IN
(19 V )
DP IN
HDMIIN1
H/P
USB UP USB IN 1
5 V 1.1 A
USB IN 2
5 V 0.5 A
USB IN 3
5 V 0.5 A
ON
OFF
DC Switch
34UM94-PD
ENGLISH
7
asseMblInG anD PReP aRInG
Moving and lifting the
Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe trans-
portation, regardless of its shape or size.
yIt is advisable to place the monitor in the origi-
nal box or packing material before attempting
to move it.
yBefore moving or lifting the monitor, discon-
nect the power cord and all other cables.
yHold the bottom and side of the monitor frame
firmly. Do not hold the panel itself.
yWhen holding the monitor, the screen should
face toward you to prevent it from being
scratched.
yWhen transporting the monitor, do not expose
the monitor to shock or excessive vibration.
yWhen moving the monitor, keep it upright and
never turn the monitor on its side or tilt it side-
ways.
yAvoid touching the monitor screen as much as
possible.
- This may result in damage to the screen or
some of the pixels used to create images.
yIf you use the monitor panel without the stand
base, its joystick button may cause the moni-
tor to become unstable and fall, resulting in
damage to the monitor or human injury. In
addition, this may cause the joystick button to
malfunction.
CaUTIon
ENGLISH
8asseMblInG anD PReP aRInG
Installing the Monitor
assembling the stand
1 Place the screen face down.
stand Hinge
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CaUTIon
2 Mount the stand base onto the stand hinge
as shown in the illustration. Fix two screws
into the back of the stand base and close the
screw cover.
stand base
120 mm
(4.7 inch)
screw Cover
or
100 mm
(3.9 inch)
yThe stand height is adjustable by 20 mm
(0.7 inch).
yWhen tightening the screws after mounting
the stand base onto the stand hinge, be sure
to hold the stand base with your hand. Other-
wise, the product may fall, causing personal
injury or damage to the product.
yBe careful not to hurt your hand on the edges
of the screw covers.
yApplying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
yIf you use the monitor panel without the
stand base, its joystick button may cause the
monitor to become unstable and fall, result-
ing in damage to the monitor or human injury.
In addition, this may cause the joystick button
to malfunction.
CaUTIon
ENGLISH
9
asseMblInG anD PReP aRInG
Detaching the stand
1 Place the screen face down.
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CaUTIon
2 Detach the screw cover from the stand base
as shown in the illustration and then remove
the two screws on the back to detach the
stand base from the hinge.
screw Cover
stand base
yIllustrations in this document represent typical
procedures, so they may look different from
the actual product.
yDo not carry the monitor upside down by just
holding the base. This may cause the monitor
to fall off the stand and could result in personal
injury.
yWhen lifting or moving the monitor, do not
touch the monitor screen. The force applied to
the monitor screen may cause damage to it.
yIf you use the monitor panel without the stand
base, its joystick button may cause the moni-
tor to become unstable and fall, resulting in
damage to the monitor or human injury. In
addition, this may cause the joystick button to
malfunction.
yWhen removing the screws to detach the
stand base from the hinge, be sure to hold
the stand base with your hand. Otherwise, the
product may fall, causing personal injury or
damage to the product.
CaUTIon
ENGLISH
10 asseMblInG anD PReP aRInG
Installing on a Table
1 Lift the monitor and place it on the table in an
upright position. Place the monitor at least
10 cm away from the wall to ensure sufficient
ventilation.
10 cm
10 cm (3.9 inch)
10 cm
10 cm
2 Connect the power adapter to the monitor and
then plug the power cord into the wall outlet.
3 Press the joystick button on the bottom of the
monitor to turn on the monitor.
yUnplug the power cord before moving or
installing the monitor. There is risk of electric
shock.
CaUTIon
Cautions When Connecting Power Cord
220 V 110 V
yMake sure to use the power cord that is pro-
vided in the product package and connect it to
a grounded power outlet.
yIf you need another power cord, please con-
tact your local dealer or the nearest retail
store.
Altri manuali per 34UM95-PD
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali LG Monitor
LG
LG 42WS10 Manuale utente
LG
LG Flatron W2343S Manuale utente
LG
LG M4225CCBA Manuale utente
LG
LG IPS235 X Series Manuale utente
LG
LG UltraGear 27GR83Q-B.AWF Manuale utente
LG
LG L1954S Manuale utente
LG
LG M228WD-BZ Manuale utente
LG
LG W1954SEV Manuale utente
LG
LG LB500K Manuale utente
LG
LG E2251S Manuale utente
LG
LG UltraGear 27GN800P Manuale utente
LG
LG 24QP750P Manuale utente
LG
LG FLATRON L1750G Manuale utente
LG
LG IPS224TA Manuale utente
LG
LG Flatron W2343S Manuale utente
LG
LG W1946P-BF Manuale utente
LG
LG 49XS4J Manuale utente
LG
LG LB580N Manuale utente
LG
LG 32GN550-B.AAU Manuale utente
LG
LG L200WJ-BF.AEU Manuale utente
