LG LP62 Manuale utente

OWNER’S MANUAL

LED TV*

Please read this manual carefully before operating

your set and retain it for future reference.

LN54**

LP36**

LP62**

* Disclaimer

LG LED TV applies LCD screen with LED backlights.

www.lg.com

ENG

ENGLISH

TABLE OF CONTENTS

WARNING

yIf you ignore the warning message, you may

be seriously injured or there is a possibility of

accident or death.

CAUTION

yIf you ignore the caution message, you may be

slightly injured or the product may be damaged.

NOTE

yThe note helps you understand and use the

product safely. Please read the note carefully

before using the product.

TABLE OF CONTENTS

3 INSTALLATION PROCEDURE

3 ASSEMBLING AND PREPARING

3 Unpacking

6 Separate purchase

7 Parts and buttons

8 Lifting and moving the TV

9 Setting up the TV

9 - Attaching the stand

9 Mounting on a table

12 Mounting on a wall

13 Tidying cables

13 MAKING CONNECTIONS

14 Antenna connection

14 HDMI connection

15 DVI to HDMI connection

15 Component connection

16 Composite connection

16 RGB-PC connection

17 Audio connection

17 - Digital optical audio connection

17 External speaker out

18 Speaker output setup

18 - Volume control port

18 Network Connection

18 - Connecting to a Wired Network

19 - Wireless network connection

19 Headphone connection

20 USB connection

21 REMOTE CONTROL

23 MAINTENANCE

23 Cleaning your TV

23 - Screen, frame, cabinet and stand

23 - Power cord

23 TROUBLESHOOTING

24 CAUTION FOR USING EZSIGN

25 SPECIFICATIONS

28 LICENSES

28 OPEN SOURCE SOFTWARE NOTICE

29 IR CODES

30 EXTERNAL CONTROL DEVICE

SETUP

30 RS-232C Setup

30 Type of connector; D-Sub 9-Pin Male

30 RS-232C Configurations

31 Communication Parameters

31 Command reference list

32 Transmission / Receiving Protocol

ENGENGLISH

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

yImage shown may differ from your TV.

yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

yThe available menus and options may differ from the input source or product model that you are using.

yNew features may be added to this TV in the future.

yThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned

off if it will not be watched for some time, as this will reduce energy consumption.

yThe energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced,

and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.

2 Attach the stand to the TV set.

3 Connect an external device to the TV set.

4 Make sure the network connection is available. You can use the TV network functions only when the network

connection is made. (Only LP62**)

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you

purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

yDo not use any unapproved items to ensure the safety and product life span.

yAny damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.

ySome models have a thin film attached on to the screen and this must not be removed.

WARNING

yYou need to enable easy access for connecting and disconnecting electric cables fed from the mains.

NOTE

yThe items supplied with your product may vary depending on the model.

yProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product

functions.

yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm

width. Use an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not fit into your

TV’s USB port.

10 mm

18 mm

ENG

ENGLISH

ASSEMBLING AND PREPARING

Remote control and

batteries (AAA)

(See p.21, 22)

Owner’s manual Cable holder

(Depending on model)

(See p.13)

Power Cord

(Depending on model)

Stand Screws

3EA, M5 x 25

4EA, M4 x 14

(Only 60LN54**,

42LN549D)

(See p.9)

Stand Screws

7EA, M4 x 14

(Only

32/42/47/55LN549C,

32/42/47/55LN549E,

LP36**, LP62**)

(See p.9)

Desk-mount Screw

(See p.10)

Power cable holder/

bolt

(See p.13)

Stand Body / Stand

Base

(See p.9)

Isolator

(Depending on model)

(See p.5)

EzSign Editor CD

(Only LN549E)

ENGENGLISH

ASSEMBLING AND PREPARING

NOTE

yAntenna Isolator Installation Guide

- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal.

»If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be

heated and excessive heat might cause an accident.

- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is

recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid

disconnecting the antenna Isolator after installation.

- Before starting, be sure that the TV antenna is connected.

ANTENNA/

CABLE IN

Cable / Antenna

Wall

Isolator

1. Connect to TV.

2. Connect to Set-Top box.

Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains

connection or through other equipment with a connection to protective earthing - and to a cable

distribution system using coaxial cable, may in some circumstances create a re hazard. Connection to

a cable distribution system has therefore to be provided through a device providing electrical isolation

below a certain frequency range (galvanic isolator, see EN 60728-11)”

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

ENG

ENGLISH

ASSEMBLING AND PREPARING

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification.

Contact your dealer to buy these items.

These devices only work with certain models.

LG Audio device Wireless Dongle

AN-WF100

Compatibility LN549C, LN549D, LP36**,

LP62** LN549E

LG Audio device • •

Wireless Dongle

AN-WF100 •

The model name or design may be changed depending on the upgrade of product functions, manufacturer’s

circumstances or policies.

ENGENGLISH

ASSEMBLING AND PREPARING

Parts and buttons

Button Description

Scrolls through the saved programmes.

Adjusts the volume level.

Selects the highlighted menu option or confirms an input.

SAccesses the main menu, or saves your input and exits the menus.

Changes the input source.

Turns the power on or off.

SETTINGS

INPUT

Buttons

Screen

Remote control sensor

Power indicator

Speakers

ENG

ENGLISH

ASSEMBLING AND PREPARING

Lifting and moving the TV

Please note the following advice to prevent the

TV from being scratched or damaged and for safe

transportation regardless of its type and size.

CAUTION

yAvoid touching the screen at all times, as this may

result in damage to the screen.

yIt is recommended to move the TV in the box or

packing material that the TV originally came in.

yBefore moving or lifting the TV, disconnect the

power cord and all cables.

yWhen holding the TV, the screen should face

away from you to avoid damage.

yHold the top and bottom of the TV frame firmly.

Make sure not to hold the transparent part,

speaker, or speaker grill area.

yWhen transporting a large TV, there should be at

least 2 people.

yWhen transporting the TV by hand, hold the TV as

shown in the following illustration.

yWhen transporting the TV, do not expose the TV

to jolts or excessive vibration.

yWhen transporting the TV, keep the TV upright,

never turn the TV on its side or tilt towards the left

or right.

yDo not apply excessive pressure to cause flexing

/bending of frame chassis as it may damage

screen.

ENGENGLISH

ASSEMBLING AND PREPARING

Setting up the TV

Image shown may differ from your TV.

Attaching the stand

Stand Base

M4 x 14

4EA

M4 x 14

3EA

Only

32/42/47/55LN549C,

32/42/47/55LN549E,

LP36**, LP62**

Only

60LN54**,42LN549D

M5 x 25

3EA

Stand Body

CAUTION

yWhen attaching the stand to the TV set, place the

screen facing down on a cushioned table or flat

surface to protect the screen from scratches.

yMake sure that the screws are inserted correctly

and fastened securely. (If they are not fastened

securely enough, the TV may tilt forward after

being installed.)

Do not use too much force and over tighten the

screws; otherwise screw may be damaged and

not tighten correctly.

NOTE

yRemove the stand before installing the TV on a

wall mount by performing the stand attachment in

reverse.

Mounting on a table

1 Lift and tilt the TV into its upright position on a table.

- Leave a 10 cm (minimum) space from the wall

for proper ventilation.

10 cm

2 Connect the power cord to a wall outlet.

CAUTION

yDo not place the TV near or on sources of heat,

as this may result in fire or other damage.

ENG

ENGLISH

ASSEMBLING AND PREPARING

Attaching the TV to a table

(Only 39/42/47LN549C, 39/42/47LN549E, 42/47LP36**,

42/47/55LP62**)

Image shown may differ from your TV.

The TV must be attached to desk so it cannot be

pulled in a forward/backward direction, potentially

causing injury or damaging the product.

(not provided as parts of the product)

4-Screws

Stand

Table

Screws: M5 x L (*L: Table depth + 8-10 mm)

ex) Table depth: 15mm, Screw: M5 x 25

Securing the TV to a table

Fix the TV to a table to prevent from tilting forward,

damage, and potential injury.

To secure the TV to a table, insert and tighten the

supplied screw on the rear of the stand.

WARNING

yTo prevent TV from falling over, the TV should be

securely attached to the floor/wall per installation

instructions. Tipping, shaking, or rocking the TV

may cause injury.

Adjusting the angle of the TV to suit view

(Only 32LN54**, 32LP36**, 32LP62**)

Swivel 15 degrees to the left or right and adjust the angle

of the TV to suit your view.

90˚ 90˚

15˚ 15˚

(Only 39/42/47/55LN549C, 39/42/47/55LN549E,

42/47LP36**, 42/47/55LP62**)

Swivel 90 degrees to the left or right and adjust the angle

of the TV to suit your view.

90˚ 90˚

15˚ 15˚

CAUTION

yWhen adjusting the angle of the product, watch

out for your fingers.

»Personal injury may occur if hands or fingers are

pinched. If the product is tilted too much, it may fall,

causing damage or injury.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali TV OLED popolari di altre marche

LG SIGNATURE

LG SIGNATURE OLED77W8PDA Manuale utente

Panasonic

Panasonic HZ1000H Series Manuale utente

Sony

Sony XEL-1 - 11" OLED TV Manuale utente

Panasonic

Panasonic TH-55MZ2000Z Manuale utente

Panasonic

Panasonic TH-55FZ950H Manuale utente

Panasonic

Panasonic TH-48LZ980Z Manuale utente

Panasonic

Panasonic TH-42MZ980Z Manuale utente

Panasonic

Panasonic TH-55HZ1500Z Manuale utente

Panasonic

Panasonic TX-48JZ980E Manuale utente

Panasonic

Panasonic TX-55HZ2000B Manuale utente

LG SIGNATURE

LG SIGNATURE 88Z19LA Manuale utente

TCL

TCL 50EP680 Manuale utente

Philips

Philips 7504 Series Manuale utente

Samsung

Samsung BHT Series Guida

Philips

Philips OLED708 Series Manuale utente

Panasonic

Panasonic TX-55LZ1500B Manuale utente

Haier

Haier LE86H9000U Manuale utente

Philips

Philips 65OLED973 Manuale utente