LG 17HK700G-WP Manuale utente
2
ENGLISH
CONTENTS
OPEN SOURCE SOFTWARE
NOTICE INFORMATION---------------------------------3
ON CLEANING --------------------------------------------3
GENERAL DESCRIPTION -------------------------------3
PART NAME AND FUNCTION--------------------------6
SPECIFICATION AND
DIMENSION OF EACH PART -------------------------10
ENVIRONMENTAL REQUIREMENT----------------- 15
CALIBRATION SOFTWARE INSTALL ---------------15
CONNECTION TYPES ---------------------------------- 16
3
ENGLISH
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and handling) upon email request to
opensourc[email protected].
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone
in receipt of this information.
ON CLEANING
Recommended Cleaning Chemicals
•Isopropanol 70%
•Ethanol 70%
•Cidex® OPA
•0.9% NaCl solution
•
How to Use Cleaner
•Prior to cleaning, turn off the detector and remove the power cable.
•Soak a soft cloth in a recommended cleaner, then lightly rub the screen with no more than 1 N of force.
•The cleaner could cause serious damage if it leaks inside the detector while cleaning.
•Do not use benzene, thinner, acids or alkaline cleaners or other such solvents.
•Cleaning guidelines for detector must only be carried out by medical professionals (doctors or nurses) and
must not be handled by patients.
GENERAL DESCRIPTION
Overview
This model is an x-ray imaging device, a system that can acquire and process X-ray images as digital images. It
utilizes amorphous silicon and a high-performance scintillator to ensure sharp high-definition image quality
with the resolution of 3.6 lp/mm and the pixel pitches of 140 um. This device is a flat panel based X-ray image
acquisition device.This device must be used in conjunction with an operating PC and an X-ray Generator. This
device can be used for digitizing and transferring X-ray images for radiological diagnosis.The data transmission
between the detector and PC can be enabled with a wired (cable).
Product Components
•Detector:
•Control Box:
-AC Power Cord for the Control Box
•Cable
-Main Cable: Detector and Control Box link cable (Supply DC power, Ethernet data, control signals of X-ray
Generator)
-Trigger Cable: X-ray Generator to Control Box, transmit control signal between detector and X-ray
Generator. (Optional)
-LAN Cable: Control Box to PC, exchanges Ethernet data between PC and detector. (Optional)
•CD: Owner's Manual,
•Regulatory Manual, Inspection Report
4
ENGLISH
Basic Accessories
100kg
Detector 1 EA Main Cable 1 EA Regulatory Manual 1 EA CD (Owner's Manual / Calibration Software) 1EA
Control Box 1 EA AC Power Cord for the Control Box1 EA Inspection Report 1 EA
5
ENGLISH
Optional Accessories
Trigger Cable 1 EA LAN Cable 1 EA
•Some models may not include additional accessories.
CAUTION
•You must use the authorized components as per the specification below. Unauthorized components may cause damage and/or cause the product to malfunction.
Component Standard
LAN Cable More than CAT5E Standard
Power Cord US – Approved Medical grade regulation
Others – Approved country safety regulation
6
ENGLISH
PART NAME AND FUNCTION
Detector
FRONT BACK
100kg
7
ENGLISH
SIDE
2
1
3
1
Power Button: Power on/off switch
(On: press over 1 Sec, Off: press over 5 Sec)
2
LED Indicator: Indicating detector’s status
3
Connection to Main Cable
LED LED Color Status
Green Data connection
Off Data disconnected
Green Ethernet connection
Off Ethernet disconnected
Green Power On
Off Power Off
8
ENGLISH
Control Box
AC-IN T4L 250V
Ethernet Sync
DXD 1 DXD 2
Power Ethernet Ready Exposure
1
AC-IN T4L 250V
Ethernet Sync
DXD 1 DXD 2
Power Ethernet Ready Exposure
7
5
2 3
6
4
No. LED Indicator LED Color Status
1
Green Power normal operation
Off Power off (AC power cord no connection or Power error)
Green Ethernet normal operation
Green blink On data communication
Off Ethernet disconnected
Green Ready signal from X-ray Generator is active
Off Ready signal from X-ray Generator is inactive
Orange blink Power error
Orange Exposure signal from X-ray Generator is active
Off Exposure signal from X-ray Generator is inactive
Orange blink Power error
9
ENGLISH
No. LED Indicator Status
2
Connecting the Control Box and the Detector A. This connector supply power (24 V 2.1 A) to the Detector, transmits X-ray synchronization signals and Ethernet image data.
3
Connecting the Control Box and the Detector B.This connector supply power (24V 2.1 A) to the Detector, transmits X-ray synchronization signals and Ethernet image data.
Control Box supports 2 Detector connections. Usage is, one is for Bucky stand, the other is for table (bed). Generally, X-ray room of hospital installs 2 Detectors, Bucky stand and
table type, it's far more convenient and efficient working environment. These 2 Detectors are not operated simultaneously, control box selects the operating Detector by AWS
command.
4
Connects AC power cord.
5
Ethernet port to transmit image/command between the Detector and PC.
6
This is to synchronize the Detector and X-ray Generator.
7
Control box power fuses are 4A, 250V toType T fuse.
Power rating:
10
ENGLISH
SPECIFICATION AND DIMENSION OF EACH
PART
Specifications
The product specifications are subject to change without prior notice for product improvements.
~ Refers to alternating current (AC), refers to direct current (DC).
Detector
Category Specifications
Model
Sensor Type Amorphous Silicon TFT
Scintillator Type CsI:TI
Total Pixel Matrix 3072 x 3072 pixels
Total Pixel Area 430.08 mm x 430.08 mm
Pixel Pitch 140 um
Effective Pixel Matrix 3060 x 3060 pixels
A/D Conversion 16 bit
Data transmission Gigabit Ethernet Standard, 500Mbps
Cycle time Typ. 8 sec
Image Transmission Typ. 2 sec
Image Storage Stores up to 200 images
Energy Range 40 kVp ~ 150 kVp
MTF Typ. 89 % at 0.5 lp/mm
DQE Typ. 72 % at 0.1 lp/mm
Size (Width x Height x Depth) 460.0 x 460.0 x 15.6mm
Weight Typ. 3.4 kg
Category Specifications
Window Materials Carbon Fiber
Trigger Mode Manual Mode
Auto Mode (Auto Exposure Detection)
Power Consumption Typ. 19W (For shooting)
Rating 24 V 2.1 A
Applied part Type: BF
Location:The front side of the detector (Effective area only)
NOTE
•Images can be saved by the X-ray generator while the power of the detector is turned on without connecting
to a PC.To produce images, X-ray is irradiated at intervals of more than 10 seconds. Check and load the saved
images from
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali LG Sensore di sicurezza
