LG SJ1 Manuale utente
OWNER’S MANUAL
Sound Bar
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
SJ1
*MFL69847101* Copyright © 2017 LG Electronics. All Rights Reserved
www.lg.com
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
Getting Started 3
Getting Started
1
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specication page of this owner’s manual
to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result
in electric shock or re. Periodically examine the
cord of your device, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
NOTICE: For safety marking information including
product identication and power supply ratings,
please refer to the main label on the bottom or the
other surface of the product.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery from the
equipment: Remove the old battery or battery pack,
follow the steps in reverse order than the assembly.
To prevent contamination of the environment and
bring on possible threat to human and animal health,
the old battery or the battery put it in the appropriate
container at designated collection points. Do not
dispose of batteries or battery together with other
waste. It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery should not be exposed to excessive heat
such as sunshine, re or the like.
For models using an adapter
Only use the AC adapter supplied with this device.
Do not use a power supply from another device or
another manufacturer. Using any other power cable
or power supply may cause damage to the device and
void your warranty.
Getting Started4
Getting Started
1
Symbols
~Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
The symblo indicates polarity of DC
Power connector.
For indoor use only.
The symbol indicates energy effeciency
marking with level Ⅵ
Table of Contents 5
1
2
3
4
5
Table of Contents
1 Getting Started
2 Safety Information
6 Unique features
6 Introduction
6 – Symbols used in this manual
7 Remote control
8 Front panel
8 Rear panel
9 About LED condition
10 Installing the sound bar
11 Mounting the main unit on a wall (Optional)
2 Connecting
13 Connecting the AC Adapter
13 Connecting to your TV
13 – Using an OPTICAL cable
14 Optional equipment connection
14 – OPTICAL IN connection
14 – PORT. IN connection
3 Operating
15 Operations
15 – DRC (Dynamic Range Control)
15 – Turn off the sound temporarily
15 – Using your TV remote control
15 – Auto power down
16 – AUTO POWER On/Off
16 – Auto function change
17 Using BLUETOOTH® technology
17 – Listening to music stored on the Bluetooth
devices
19 Sound adjustment
4 Troubleshooting
20 Troubleshooting
20 – General
21 – NOTES to use wireless
5 Appendix
22 Trademarks and licenses
23 Specifications
24 Maintenance
24 – Handling the unit
Getting Started6
Getting Started
1
Unique features
Auto power down
This unit supports to turn off by itself for saving
energy consumption.
Portable In
Listen to music from your portable device.
(MP3 player, Notebook, Smart phone, etc..)
BLUETOOTH®
Listens to music stored on your Bluetooth device.
Introduction
Symbols used in this manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages
from abuse.
Getting Started 7
Getting Started
1
Remote control
Replacement of battery
Remove the battery cover on the rear of the remote
control, and insert battery with and matched
correctly.
• • • • • • • • • • • • • • a • • • • • • • • • • • • •
1 (Power) : Switches the unit ON or OFF
STANDARD : Selects standardized sound.
BASS BLAST: Reinforces the treble, bass and
surround sound effect.
OPTICAL : Selects the optical function and source.
j(Bluetooth) : Selects the Bluethooth function and
source.
PORT.IN (Portable in): Selects the portable function
and source.
VOL o/p: Adjusts speaker volume.
• • • • • • • • • • • • • • b • • • • • • • • • • • • •
DRC ON/OFF :
- Turns on or off DRC function.
(Page :15.)
- Controls this unit using TV remote.
(Page :15.)
(Mute) : Mutes the sound.
AUTO POWER ON/OFF :
- Turns on or off AUTO POWER function.
(Page :16.)
- Turns on or off the Bluetooth connection lock
function. (Page :18.)
?: This button is not used.
Getting Started8
Getting Started
1
A1 (Standby/Standby LED)
- Switches to power on or standby mode.
- Standby LED lights up in red on standby mode.
Bp/o (Volume)
Adjusts volume level.
CF (Function)
Selects the function and input source.
DOPTICAL LED
Ej(Bluetooth) LED
FPORTABLE LED
G Remote sensor
H Speakers
Front panel
Rear panel
APORTABLE IN : Portable input
BOPTICAL IN : Optical input
CDC IN : AC adapter input
DPassive Radiator : Make the bass sound
improved
EWall mount hole : You can mount the sound bar
on a wall. (page : 11-12)
A B C
D E F
G
H H
CDE ED
B
A
Getting Started 9
Getting Started
1
About LED condition
LED Condition Description
OPTICAL LED turns on. OPTICAL function is selected.
j(Bluetooth) LED turns on. Paired with Bluetooth device.
j(Bluetooth)LED blinks. Waiting for Bluetooth connection.
PORTABLE LED turns on. PORTABLE function is selected.
yWhen you press any button, standby LED (Red) on the main unit blinks.
yWhen you press (Mute) button, standby LED (Red) blinks slowly.
yWhen this unit reaches minimum volume, standby LED (Red) turns on for 2 seconds and blinks slowly.
yWhen this unit reaches maximum volume, standby LED (Red) turns on for 2 seconds.
yWhen you press volume (o/p) button continually, standby LED (Red) blinks quickly.
, Note
Getting Started10
Getting Started
1
Installing the sound bar
You can hear the sound by connecting the unit to the
other device : TV, Blu-ray disc player, DVD player, etc.
Place the unit in front of the TV and connect it to the
device you want. (Page : 13)
yFor best performance of wireless connection
such as Bluetooth do not install the unit on
Metallic furniture because wireless connection
communicates through a module positioned
on the bottom of the unit.
yBe careful not to make scratches on the
surface of the unit when installing or moving
them.
yUse caution when handling this unit.
The speaker on the rear is exposed. Avoid
making contact with the exposed speaker.
> Caution
Altri manuali per SJ1
2
Indice
Altri manuali LG Sistema di altoparlanti
