LG SK1 Manuale utente
OWNER’S MANUAL
Sound Bar
Please read this manual carefully before operating your set and
retain it for future reference.
MODEL
SK1
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
www.lg.com
1 Getting Started
Getting Started
2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
Getting Started
3
Getting Started
1
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specication page of this owner’s manual
to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result
in electric shock or re. Periodically examine the
cord of your device, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
NOTICE: For safety marking information including
product identication and power supply ratings,
please refer to the main label on the bottom or the
other surface of the product.
This device is equipped with a portable battery or
accumulator.
How to Safely remove the batteries or the
battery pack from the equipment: To Remove the
old batteries or battery pack, follow the assembly
steps in reverse order. To prevent contamination of
the environment and bring on possible threat to
human and/or animal health, the old batteries or the
battery pack must be put in an appropriate container
at designated collection points. Do not dispose
of batteries or battery pack together with other
waste. It is recommended that you use local, free
reimbursement systems batteries or battery packs,
(may not be available in your area). The batteries or
the battery pack should not be exposed to excessive
heat such as sunshine, re or the like.
Getting Started
4
Getting Started
1
Symbols
~Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
Table of Contents
5
1
2
3
4
5
Table of Contents
1 Getting Started
2 Safety Information
6 Unique features
6 Introduction
6 – Symbols used in this manual
7 Remote control
8 Front panel
8 Rear panel
9 About LED condition
11 Installing the sound bar
12 Mounting the main unit on a wall (Optional)
2 Connecting
14 Organizing cables (Optional)
14 Connecting to your TV
14 – Using an OPTICAL cable
15 – LG Sound Sync (Optical)
16 Optional equipment connection
16 – OPT. IN connection
16 – PORT. IN connection
3 Operating
17 Operations
17 – DRC (Dynamic Range Control)
17 – Turn off the sound temporarily
17 – Using your TV remote control
17 – Auto power down
18 – AUTO POWER On/Off
19 – Auto function change
20 Using BLUETOOTH® technology
20 – Listening to music stored on the Bluetooth
devices
22 Sound adjustment
4 Troubleshooting
23 Troubleshooting
23 – General
24 – NOTES to use wireless
5 Appendix
25 Trademarks and licenses
26 Specifications
27 Maintenance
27 – Handling the unit
Getting Started
6
Getting Started
1
Unique features
Auto power down
This unit supports to turn off by itself for saving
energy consumption.
Portable In
Listen to music from your portable device.
(MP3 player, Notebook, Smart phone, etc..)
BLUETOOTH®
Listens to music stored on your Bluetooth device.
Introduction
Symbols used in this manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages
from abuse.
Getting Started
7
Getting Started
1
Remote control
Replacement of battery
Remove the battery cover on the rear of the remote
control, and insert battery with and matched
correctly.
• • • • • • • • • • • • • • a • • • • • • • • • • • • •
1(Standby) : Switches the unit ON or OFF
OPTICAL :
- Selects the optical function and source.
- Turns on the Bluetooth connection lock function.
(Page 21)
STANDARD :
- Selects standardized sound.
- Turns on AUTO POWER function. (Page 18)
PORT.IN (Portable in) :
- Selects the portable function and source.
- Turns off the Bluetooth connection lock function.
(Page 21)
(Mute) :
- Mutes the sound.
- Turns off AUTO POWER function. (Page 18)
(Bluetooth) : Selects the Bluethooth function
and source.
VOL o/p: Adjusts speaker volume.
• • • • • • • • • • • • • • b • • • • • • • • • • • • •
BASS BLAST: Reinforces the bass and powerful
sound.
DRC ON/OFF :
- Turns on or off DRC function. (Page 17)
- Controls this unit using TV remote. (Page 17)
Getting Started
8
Getting Started
1
A
Remote sensor
B
State LED
C
Bluetooth LED
This unit operates only with the remote control.
, Note
Front panel
Rear panel
A USB (Service only) : S/W download connector.
BPORT.IN (Portable) : Connect to a Portable
device.
COPT. IN (Optical) : Connect to an Optical device.
DWall mount hole : You can mount the sound bar
on a wall. (Page 12-13)
Be careful to make sure children do not put their
hands or any objects into the *speaker duct.
* speaker duct : A hole for plentiful bass sound
on speaker cabinet (enclosure)
> Caution
Getting Started
9
Getting Started
1
About LED condition
: White LED is staying on. : White LED is blinking. : LED is off.
: Color LED is staying on. : Color LED is blinking.
LED Condition Description
(White) State LED (White) turns on. Optical function is selected.
(White)
s
(White)
State LED (White) blinks twice and
turns on.
LG Sound Sync (Optical) function is
selected.
(Blue)
Bluetooth LED (Blue) blinks.
Slow blink : Waiting for Bluetooth
connection.
Quick blink : Connecting Bluetooth.
(Blue) Bluetooth LED (Blue) turns on. Paired with Blutooth device.
(Green) State LED (Green) turns on. Portable function is selected.
yWhen you press any button, State LED (Red) on the main unit blinks.
yWhen you press (Mute) button, State LED (White) and Bluetooth LED (White) blink slowly.
yWhen this unit reaches minimum volume, State LED (White) and Bluetooth LED (White) turn on for 2
seconds and blink slowly.
yWhen this unit reaches maximum volume, State LED (White) and Bluetooth LED (White) turn on for 2
seconds.
yWhen you press volume (o/p) button continually, State LED (Red) blinks quickly.
, Note
Getting Started
10
Getting Started
1
Useful functions for using the unit
Function Description To do Do this
TV Remote On/
Off
(Page 17)
It allows you to control the
volume of this unit by your TV
remote control even by other
company’s product.
Initial setting of this function
was set to on.
ON Press and hold DRC ON on the remote
control for about 2 seconds.
The State LED (White) and Bluetooth LED
(White) blink twice.
OFF Press and hold DRC OFF on the remote
control for about 2 seconds.
The State LED (White) and Bluetooth LED
(White) blink twice.
BT Lock On/Off
(Page 21)
It allows you to connect a
Bluetooth deivce only on
Bluetooth function.
Initial setting of this function
was set to off.
ON Press and hold OPTICAL on the remote
control for about 2 seconds in Bluetooth
function.
The State LED (White) and Bluetooth LED
(White) blink twice.
OFF Press and hold PORT.IN on the remote
control for about 2 seconds in Bluetooth
function.
The State LED (White) and Bluetooth LED
(White) blink twice.
Auto Power
On/Off
(Page 18)
It allows the unit to turn on
and off automatically by input
signals :
Optical, Bluetooth.
Initial setting of this function
was set to on.
ON Press and hold STANDARD on the remote
control for about 2 seconds.
The State LED (White) and Bluetooth LED
(White) blink twice.
OFF Press and hold (Mute) on the remote
control for about 2 seconds.
The State LED (White) and Bluetooth LED
(White) blink twice.
Altri manuali per SK1
4
Indice
Altri manuali LG Sistema di altoparlanti
